Dave1647545494

if the angle of the offset is less than or equal to the pinion angle it will be fine any farther will give you excessive u-joint wear.

fwiw the fleet diesel guys I sell to say rotella is junk they all go for the mobil delvac or the chevron delo 400

my Dad doesnt like to do them anymore, but he can probably recommend somebody that doesn't suck.... hit me up if you don't have his number anymore

what do you need for the one you have left?

Thanks for coming in!

thanks I think....

most parts stores take it for free

have you tried a dremel tool? might be easier/cheaper to get ahold of

columbus col-weld if its cast iron it really needs to be heated in an oven to be properly welded

I can probably order it in 10 foot sticks call me monday

Napa will make it to your spec, but if it doesn't fit they won't take it back and its expensive so measure carefully.

 

I don't have a store in this market with a machine to make crimped fittings yet.

won't heads and cam put you in the 10's?

you can rent a pressure tester at most auto parts stores...... like oreilly's

call me if you need a new circuit board and I will see what I can find on the cheap

I always try to shop in the morning on a weekday....

 

Getting bent because you go into a retail store at Christmas time and have to stand in line makes me LOL.....

 

try this place I've always liked it..... Barnes Guns (740) 654-4867 515 N High St Lancaster, OH 43130

just run the cheapest 5-30 you can find in it. I went over 400k in two different cars and am closing in on 200k in my current car....

they did a manual swap on hot rod tv last year you can probably find the build videos online

pull the knuckle off and get ahold of me.... I have a press if you bring cold beer I will teach you how to use it.

ok first things first you need to set the base timing with the vacum advance disconnected and the port plugged on the manifold......

 

can you take a picture of your balancer and pointer? I can probably help you out.

3 inch up to 6 inch or so price varies on size these are only availiable in westerville and mount vernon..... thanks for looking

 

Dave

I'm not mad, but I dont have any control over whathappens at other stores. So I will just say again. If you want to make sure you get the best deal your going to need to come and see me in westerville between 8am and 5pm monday through friday at 5767 westerville road.

its a business not a charity.... if you can find a lower price on a like item at a retail location in columbus let the salesman know and he will adjust the price.... If you want to be 100 percent sure your transactionn gets handled correctly come see me in westerville and make sure you tell me who you are and who your with before we start the transaction..... This account is a privelege that I had to jump through a bunch of hoops to get and it keep open..... please treat the sales people at the other locations with respect and gratitude or i will just close the account.....

 

thanks and have a great day

magic eraser works good if the paints pretty fresh

well since you already gotta have the trans out for a clutch might as well just toss a glide in it and call it a day.....

turborust has one all set up for a windsor ford and a motor plate its for sale I think....