88lx5oh

i would, but if i dont sell this stuff im gonna use it. side note i called ya a few times, no answer though

priced rduced.. $250 bottom dollar

um no that was not camron.. that was juelz santana

congrats.. ijust ahd my one year anniversary. i love being married. guess its all in who you marry.

can yuo order me some if i give you some cash??

what is the best way to applicate this stuff. i hear that its self leveling, and you can brush it on, but id rather spray it. but i also heard spraying it you have to thin it down too much.

where can i get it locally?? ive been reading up on it and it seems to be some good shit. im going to use it to coat the uderside of my notch and the flor board on the inside after i get all the old paint stripped off. anyone have experience with it?? and how much will i need for the underbody and inside floorboard of a notch 88 stang?? also what does this stuff cost

ben u need a 2 wheel dolly.. i have one you can borrow if need be

my neighbor across the street fits this discription and has a mid 90s cutlass convertible with temp tags. except he doesn thave hair to his shoulders

registered.. sell it and buy a ford crate motor and put twins on it

derek and dave ar ethe tire guys.. straight up

chirs im surprised you didnt know that. either way.. your welcome

J yard.. mark VII fan as well, which is what ill be running, you can run single or dual fan setup.. if space will allow. i cna help ya wiht the FPR. did you end up getting antoher one yet

thats a nice helmet i have been using my buddys

he might trade for some NOS stuff, but it would have to be allot of stuff. PM me what youd be willing to trade for it, and il let him know

atlantis tire mahcine 5 months old paid $1200 new.. sell for $1000 hobart Plasma cutter 250 amp, built in compressor- paid $800 new sell for $700 18ft dove tail trialer with loading rams and hand winch $700 ruger p94 stainless 9mm handgun - $400 he will trade everything for a mustang gt or 5.0 mustang 5 speed though

the top kit is the better one... comes with the maf and air tube 2nd one does not

Kb

anythig with alot of spray

they are getting hard to find.. and i found these 2 tongiht. if anyone wants one.. jump on these good deals. i think this is exactly like the kit dyno biran has.. unless he has the smaller turbos. these have the gt35bb turbos http://cgi.ebay.com/ebaymotors/Incon-800-TTi-5-0-Mustang-Turbo-System-Complete_W0QQcmdZViewItemQQcategoryZ33742QQihZ014QQitemZ330040329277QQrdZ1QQsspagenameZWDVW http://cgi.ebay.com/ebaymotors/WICKED-Incon-tti-800-HP-twin-turbo-kit-Mustang-5-0_W0QQcmdZViewItemQQcategoryZ33742QQihZ009QQitemZ190041679118QQrdZ1QQsspagenameZWDVW

and that saleen for sure could not back that plate up.. i used to pull hard on him with my 88 lx wiht jsut exhaust and a 3.73 gear. when benji had it it made 385 rwhp stock motor with a vortech v2sq blower, then he blew it up.. ordered a dss shortblock wiht low compression i think 8.5 to 1 had bought an intercooler, pop opff valve, pulley and what not to run more boost, but decided to sell the car.. never put the blower on it.. and sold it na low compression motor. benji then boght that ss camaro and proceeded to dump money into it. and the saleen stayed slow for the rest of its life, cause delaney couldnt afford to even put tires on the car.

gotta pull the upper manifold, then pull your fuel rail off. youll need to disconnect the main fuel line to the rail.

yuip that was my next corse of action.. and no they wont be reused

so pulling out the stock suspension in my nothcback, an di cannot for the life of me get the lower control arm bolt out. i sprayed it with lubricant, heated it, hit it with a hammer, turned it with a ratched.. and then did all at the same tim eas well. wont bude.. it will turn inside the bushing but wont push through. wont even budge.

ehh if i ever get around to finding pics 86 mustang lx (new paint, etc. etc. all looks) 88 mustang lx (nos dry kit, pony wheels, t5 swap, CAI, 3.73s, nitos controller, BBK cable and adjuster, steeda springs, flowmasters, OR h pipe, BBK long tubes, other shit i cnat remember) 89 mustang gt ( cervinis mach 1 hood, flowmaster, OR Hpipe, short throw, t5, headers) 88 mustang lx (kenny brown suspension, ported upper and lowers, upper and lower CAs, shorty headers, off road h pipe, flowmasters with dums, 24# injectors, ported E7TE heads, underdrive pulleys, 3.73s, aubrun pro diff, SVO girdle, fitapaldi race wheels recaro seat, momo steering wheel, UPR short throw, Centerforce clutch, NX wet kit, eibach pro kit, 255 walbro, bbk CAI, UPR cable, quandrant, adjuster, alot more shit i cnat remember) 87 mustang gt (short throw,BBK CAI, mac cat back, h pipe, headers, nitrous, t5, 255 walbro) 98 mustang gt (flowmasters, 4.10, short throw, t45) 88 mustang notchback (currently the car i have, and is pretty much bare. its getting a full makeover) and i dont consider it muscle but have the 01 mustang vert ( eibach pro kit, k&n, 98 Cobras)