I know where my mistake was and how I did it. I guess now I need to know how I fix it. The total capacity includes oil trapped in other parts of the system. Since I was ignorant going into the repair I wasnt aware that the compressor holds a certain amount of the total capacity and the best way to determine how much this is would have been to remove the oil from the compressor and swap it over to the new one minus the 1.5oz included in the new one. I spilled alot of it out during removal and this was my error. Since there wasnt an internal fault, I am taking a chance of not replacing the accum and tube in the hopes that I get lucky and no damage is caused to the new pump. I think now I need to make a guesstimate on what the amount of oil is that the old compressor held(not the entire system) and pray. I guess then I vacuum the system and fill with refrigerant.
I know at this point the best thing to do is replace the accum, tube, flush the system completely and start all over with the correct amount of oil for the total capacity of the system but thats all out of my scope of know-how.