NWill

Other than GoDaddy, what else is there? It seems like their prices start to add up quick and go up every year.

 

I basically need a simple website with ecommerce capabilities and an email address.

Praxair is about $190 for a 80 size tank and first fill is free. They were the cheapest by far last time I bought a tank.

Here is another fire pit I'm working on. Any ideas for it? Hinged doors? Something to cut out above the openings? A ring around it for a foot rest? Etc.

http://www.columbusracing.com/forums/picture.php?albumid=987&pictureid=8808

I assume you want the table saw on-site to build as you go? If not, bring me dimensions and I can cut whatever you need.

The firesticks are easy. There a bunch of videos on youtube. It's either more reliable than it used to be or the FireTV is just a lot faster since it has an ethernet port. My old firestick was inches from my router so I don't think that was the issue.

 

I haven't turned on my cable box since replacing my broken firestick a few weeks ago. I haven't had any issues streaming like I used to ~6-7 months ago.

I'm not familiar with the Firestick, but if it's not available on Prime Video I'm assuming it's not available on the stick thingy..?

https://www.amazon.com/Ground-Floor-Complete-First-Season/dp/B00GO7GTTE

 

I just hate having to bounce around netflix, hulu, hbo go, prime, showtime, and whatever else just to find a specific show to watch. That's why I just download them.

 

:dumb:

Get a Firestick or FireTV

Install Kodi

Install Exodus

Watch all of the above fo free.

 

Seriously though, it takes 5 minutes. I stopped using torrents because of it. Instead of downloading and using Plex or whatever you just browse through shows like you would on prime video, hulu, etc.

 

Any new show/movie/whatever you'd find on torrents is already on Kodi to stream. It's faster and easier.

"All the same stuff" :dumb:

 

Apparently I'm missing something? There hasn't been anything I've wanted to watch that I couldn't find on Kodi.

 

I love torrents but Kodi seems a lot easier for any movies or shows.

Unless you want to have the shows on your computer, $40 Firestick + Kodi > Torrents. All the same stuff streamed directly to your TV.

Incoming

Whoever wants scrap (Clay?) come to my house. I have a bunch of sheet metal skeletons from my plasma table. They are cut into ~4'x4' sections.

You got it. I'll burn one out tomorrow.

how fine a details can it cut (like can you do keychains?)

What type of metals also?

 

I can cut out pretty small shapes, but I can't cut out letters small enough for a keychain unless maybe just initials.

 

I'll be adding an air scribe to my table eventually for reasons like this. I'll be able to engrave in much greater detail.

 

Metals? Steel, aluminum, stainless, copper, etc. Pretty much any metal.

 

Totally dig this.

Thanks!

Price? I'd LOVE to get one of these for Dad for fathers day in June. Can buy now.

 

Also, I want to meet soon to discuss knife designs. I have ideas.

 

I'm selling these for just $25 for bare metal. They will be deburred and sanded. You can either clear coat them or spray paint your color of choice. I'd do it but I'd rather keep the cost down. I can't paint in my garage in this weather anyway.

 

I'd love to meet up sometime. I'm always looking for new ideas.

Not my idea. I found a file online and tweaked it a bit. I have a couple of these around my garage.

 

http://www.columbusracing.com/forums/picture.php?albumid=987&pictureid=8757

http://www.columbusracing.com/forums/picture.php?albumid=987&pictureid=8756

The design part of these setups sounds interesting. Are there standard switch panels that people use? Anyone want to draw up a custom one for me to cut out of scrap metal? Or any other brackets, etc.

I'll do ya one better and buy you a 6 pack of any beer you want! or just throw you some cash, whatever you like. Let me know when we can get together.

 

Works for me! Surprise me on the 6-pack. I'm in Worthington near Linworth and Snouffer, I also drive around Columbus for work. My schedule is usually pretty flexible.

Beat me to it! That's a way better souvenir than the cup and towel I have from my trip there, lol.

 

Sent from my XT1585 using Tapatalk

This track or any other is $0.10/square inch.

Example:

That track is about 15" x 30"

450" x .10 = $45

 

Add $0.15/square inch if you'd like it mounted on stained wood. I hope to have an example of this soon.

 

So, that track mounted on wood would be 450" x .25 = $112.50

 

The wood will be a little oversized so you'd end up around a 16x32 piece for that particular example.

 

I can work out a deal on anything that will fit inside the cutout. Say you want something like an oval track, I can fit smaller tracks in the middle of what would otherwise be scrap.

i'll take it off your hands for cheap if you are letting this go?

I was making it for you anyway [emoji4] I'll charge you scrap weight. Should be about a nickel.

Amazing work.

Thanks!

Can I have you make my studio logo so I can hang it on the wall?

Absolutely! The best way for you or anyone else is to send me any files you have of the logo, and a few examples off google images of what design you're looking for. PM, email, or text is fine.

Circuit of Americas. I was going to mount this to wood but my controller timed out when it was supposed to shut off the torch. This resulted in a hole on the edge of the end point around turn 16 http://www.columbusracing.com/forums/picture.php?albumid=987&pictureid=8754

Another sports sign that was requested

 

http://www.columbusracing.com/forums/picture.php?albumid=987&pictureid=8753

We plan to do St John since we're staying close to Red Hook. We were gonna do Tortola but I didn't feel like getting a passport right now.

 

I was just on St. John for 8 days. It was my 7th time there and finally went to Tortola, the Baths, etc. I didn't have my passport with me either. They are so laid back haha. No passport, we'll smuggle you, it's cool.

I try to make all my gifts. "HOME" signs, vacuum molded whiskey boxes, etc. They all fight over them at the gift exchange. It doesn't have to be that cool, anyone loves something you actually made. Take a $12 HF jigsaw and carve out Ohio on some plywood.

Thanks! I'd like to get one mounted nicely with stand offs. I just haven't had time or a reason to use the metal honestly. I'd like to do at least a 36" one.

 

I'd make one a little over cost just to have an example if there is a track anybody wants.

Double to see if my sig shows up

Thanks! If you or anyone else have any ideas post them up! I've also added contact info to my sig