billzie

I'm looking for more info and tix for the Rush concert, I've never been to Germain and want info on the best seating and willing to pay a decent price for good tix, need a pair. Also insight on the parking sit and best place to get in and out quickly would be good info, I'm driving up from Athens and the gf needs to get back home for her kids asap afterward. Thanks for you help, Bill.

but... in one of his last televised performances back in the mid-80s Buddy Rich on the Tonight Show with Johnny Carson (an avid drummer himself) told Johnny that Peart was the best overall drummer he had ever heard. I remember that show and was blown away that a few old-fart-white dudes knew of Rush and Peart specifically. Bill btw, I'm looking for more info and tix for the Rush concert, I've never been to Germain and want info on the best seating and willing to pay a decent price for good tix, need a pair.

eh? How much bigger of a pic do you need? Save it to your computer and magnify it. Any other questions, please ask. Bill.

I'll have a chance to come up to Columbus tomorrow, Saturday Aug 11, if anyone wants anything please hit me up. I'll be at work from 1:30 pm til about midnight, and I'll check em/pm when I get home. Or, you can call me on my cell at any time except for when I'm at work tonight. 740 590 5888. Thanks for looking, Bill.

Sorry, I shoulda gave more info. I didn't notice and "skids" along my path when I made that little trip, had the rev the hell out of her just to make it. I jacked up the rear and rear wheels moving freely by hand, and I'm believing it's in the tranny b/c I wasn't getting a great response then by having it in running and in gear. Gas should be good, barely any it it to begin with and put a half tank (~12 gal) of 93 in it. Seems to be engaging through shifting, just not actually moving??? Engine running very strong with no noticible big problems, needs typical carb tuning after all this time and new battery wouldn't hurt, both so she'll get back to starting at the flick of the ign like she used to. Thanks, Bill.

Howdy, I have a 79 Z28 350/350. It's been in storage for 10 years, in the beginning it was started every month or so, the last half of that time not so much. I pulled it out of the garage last month to put it up for sale, and finally got it started and running, but it just won't move worth a damn. I was able to barely get it out of the driveway and turned around and back in, maybe 1/3 mile. The tranny was rebuilt by a race tranny shop in WV just before going into storage, has less than 5K miles on it, has shift kit, valve body mods, higher stall tc, B&M shifter, etc. The fluid is at spec and looks/smells really good. Do you tranny guys have any advice on the easy and simpler things for me to check to see if I can get it going well. I live in the boones and the only tranny shop is about 12 miles down the highway, and can't afford the tow or "inspection" fee. Thanks in advance for your help, Bill.

Howdy folks, I have a small utility trailer for sale. It has served me very well for the last 10 years but it was time for a larger trailer. I am the second owner, it was originally purchased at Sears in 1983 made by Kar-Rite in Franklin Park IL just down the road from the Sears warehouse (they don't make trailers since Thule bought them out), so it's not one of the cheapo China built POS on the market today. It is in very good condition once you look past the weathered deck, I've never done anything to pretty it up. The original stamped steel C channel tongue got twisted when the little lady jack-knifed it several years ago, I replaced it with a 2x2 box piece (seen in pic) but it was thin wall and after a couple of seasons it cracked, and now I have replaced that with a 2x3 rectangle piece of thick wall from the scrap yard and that should outlast the rest of the trailer. The current deck is 48"x40" but I've had 48"x72" on there in the past. I believe the max load is 1000 lbs according to the title. Tongue accepts standard 1 7/8" ball. The tires are in good shape and haven't had to add air in them this season yet. I've had to splice the wiring, and one tail light lens is missing (see pic, I did remove the tape and lens completely now), but I'll try to find a replacement (can't be more than a few bucks at Napa), I installed small wheels on the end so I can tip it on end and roll it next to the garage wall for storage. The bearings were replaced and packed last fall and I've only used it twice this year. I just used it last week for a quick trip to Lowes b/c I didn't want to pull out the bigger trailer and I was using my Merc Tracer to pull, I loaded a 60" bathroom cabinet and double bowl sink top and a 40g hot water heater on it, no problems. This little trailer is perfect for someone who needs something to haul smaller stuff like this or a riding mower, or only has a small car, and has limited space to store it, or could be a dedicated equipment trailer to mount a welder or generator. This trailer was almost $300 when bought at Sears 24 years ago (atoo), and the new cheapo China made ones are about $220 new (unassembled)(ie @ Harbor) or $300 assembled (ie @ Lowes, HD, TSC). I'd like to get $100 for it, OBO, and will accept partial trades plus cash. I can accept Paypal if needed, but cash is king. I can deliver to the Col area but delivery fee will be charged. Thanks for looking, Bill. Another pic and more pics of other stuff I have for sale can be seen here http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/Trailer2.jpg

Bump for price drop! Thanks for looking, Bill.

Bump for the leather Corvette seats with switch and wiring harness. I originally bought them for my Camaro or Nova and never got around to it, my loss is your gain. Thanks for looking, Bill.

How much of the wire are you needing? I think I only have about 50 ft left and I might need most of it for the few projects I'm doing. Sorry no mufflers available as of now, the turbos off the Z28 are a bit shot and the ones I got from Martin are going on the Z eventually, the Borla is going on my Merc Tracer LTS when I get my wagon running (need to swap the hitch before installing the Borla). Thanks for looking everyone, I'm getting tons of views and hot air but only a handful of guys actually follow through. All of my stuff is top quality and altough I'm not giving it away you'll save yourself a good chunk of money getting from me. I'm open to offers, so don't be shy. Thanks again, Bill.

I only have the Walbro RX7 fuel pump and I'm hoping to sell that stuff in the "kit" with the Haltech and other stuff. I haven't installed the mufflers yet, looks like I'll have to run adapters to fit my pipes, but that's ok, I only need them to keep the open pipes quiet while I'm trying to sell the 79 Z28, they'll be on this week if no rain. Thanks, Bill.

Tank is sold to a Pharmacy for $1000 delivered. Thanks for looking. Bill.

One of the Pioneer GM-H100 amps SOLD, thanks Sean. All pm and em answered as of now, thanks for looking, Bill.

Thanks Chris, I appreciate your patience with me getting up there to pick them up. I hope your tranny project works out soon for you. Great deal on the mufflers. Bill.

Sorry no cd player head units, just cass head units with cd changers. I haven't had the chance to dig through all the audio stuff yet and compare pricing, so this is what I've quickly come up with. My pricing is always obo, I'm more likely to do this if multiple items are bought. All of my audio stuff is always based on quality, not flashy advertised numbers. The PPI Sedona APA425 is a 4 channel amp, great quality amp made in USA, true clean power 25w rms x 4 at 4 ohm, will sound cleaner and louder than most amps claiming much higher output. $75. Pioneer GM-H22 is 25w x 2, 70x x1, bridgeable and 2 ohm stable, missing speaker wiring harness but I never had it and used generic pin plugs from Radio Shack, great little amp. $35. (two) Pioneer GM-H100 is 50w x 2, 160w x1, bridgeable and 2 ohm stable, great amps. $75 each. One is SOLD, one more availalbe. (two) Pioneer GM-600 is 18w x 2, 2 ohm stable, great center channel or fill amps, missing wiring harnesses but again I used generic pin plugs from the Shack. $20 each. (two) Coustic XM-5 cross-overs, older but none better. $35 each. I also have BRAND NEW high quality RCAs, speaker wire, and 4g power wire made by Rockford Fosgate. Also have tons of used accessories like fuse holders, distribution blocks, wire, connectors, etc etc. BTW, I'm an old school installer who still does installs on the side, that's why I have all this stuff. BTW-2, to the guys who are saying that RF wire is crap, you obviously don't know jack about wire and sound quality or performance. There are three basic qualities of wire: Crap, this is the stuff you can get anywhere and will work OK considering the crap components you use it with, unfortunately this is the stuff that most guys use in there DIY installs; Solid, this is the stuff that will compliment 99.99% of all the systems car & home out there, it is very good quality and made to last and sound great from a long time, this is the stuff guys should be using unless you're still rockin Legacy, Pyramid, etc etc; Audiophile, this is the stuff that most folks don't even know exists and is found in very few car installs and only the best home/professional installs, this is for the guys who've never even heard what clipping is and listen to symphonic music up to 150 db and feels and sounds like you're on stage at the Met or Kennedy center. The stuff I have falls in to the Solid group, yes there is more expensive wire out there in this group, but none of it will perform any better with the overwhelming majority of components in use by us, at the prices I'm charging for my stuff it's just a little more than getting the crap that's out there and you're saving money compared to buying it from a store, shop, or even the internet. I'm having a late start today getting up to Columbus, so I will bring these along with me. Please call me on my cell 740 590 5888 to meet. If you call quickly you'll catch me before I leave the house and I can pack more stuff. Thanks for looking, Bill.

OK, before I get started I apologize if I'm not following the rules. I have waaaay too much crap to get rid of and I don't want to clutter up this forum with a hundred posts. That being said... I have a ton of stuff, a little bit of everything from Ford to Chevy to Import to Audio to shop stuff. Just way to much to post individually. If you see something you like, just ask. I price my stuff like this: NOS (new old stock) gets an accross the board discount over the prices I find on the internet (Jegs, Summit, etc); NOS display items get an additional discount; used stuff is priced according to condition. Most of the stuff is NOS still in the boxes, some of it was shop display models that were never used but no box or missing stuff, some of the stuff was gently used. All of it is good quality. I will add more pics over the next several days. Take a look. What you see is what you get, so ask questions, I'll be glad to answer. http://s50.photobucket.com/albums/f341/billzie/Items%20for%20sale/ Most of the items are NOS which are brand new and in the packaging but might be dusty or have worn boxes I price this stuff with an across the board discount over the online retail prices (Jegs, Summit, etc), some is new and never installed/used but has no packaging or missing pieces and these items get an additional discount, and some items are gently used and are priced accordingly. All of my stuff is good quality, no junk here. I am willing to ship or meet for delivery, but buyer is responsible for shipping/handling charges. I will accept Paypal plus cost of their charges. All of my prices are OBO, and I'm more willing to do this is multiple items are bought. I am located in Athens, about 75 miles SE of Columbus. I can make a trip up to Columbus tomorrow Sat 8/11 and can bring items but you have to contact me to make sure I bring the item, I have met several guys already and have found what seems to be the best place for me and is central and easy to get to for most of Col. Please ask any questions, I will answer as quickly as possible. Examples, just a fraction of what I have: http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/GTX1.8DOHCturboengine4.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale077.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale037.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale049.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale064.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale042.jpg http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale066.jpg

Both sets of Recaro seats are gone. Thanks Justin and Bryan! Still have the Corvette seats and willing to bring them along on my trip up to Columbus tomorrow Wed 7/25. Contact me asap to make arrangements. Thanks for looking, Bill.

Of the Recaro seats, the buyer picked out the darker blue w/multi-color tweed inserts, even though they had the most fabric issues, they matched his interior better. So, I still have the Recaro blue with teal inserts still available and the Corvette seats. Thanks for looking, Bill.

I'm in the process of making a deal with a guy in NJ for $800 plus gas money to meet him in WV. If that falls through I'll let you know. Folks, please em/pm me if asking about items other than what this post is for, I appreciate it. Thanks for looking, Bill.

Update: one set of the Recaro seats is sold, just waiting for the guy to pick up and pick which set he wants. Lots of interest in the Corvette seats but no sale yet. I will be coming to Columbus area Wed 7/25 and can deliver a set of seats at that time, if interested please contact me asap. Thanks for looking, Bill.

Howdy, I've got a Ford Chrome valve cover kit. For Ford Windsor small blocks. Trans-Dapt # 3048. Comes with the pair of vlave covers, the hold down bolts and spreaders, and one breather. The box has been open but this stuff has never been installed. It is NOS (new old stock), been on the shelf in storage for years, a bit dusty but in great shape otherwise. New retail price on this is about $92 (Summit, Jegs), my price $45, NEW PRICE $35!!!, obo. I also have a boat load of other parts, http://s50.photobucket.com/albums/f341/billzie/Items%20for%20sale/ , if you see something you like, just ask via pm or em. Thanks for looking, Bill. http://i50.photobucket.com/albums/f341/billzie/Items%20for%20sale/partsforsale043.jpg

It is a MSD 6A, sorry for the typo on the pic title, if interested contact me, I may part out that group if I can find a buyer for some of the other items. Thanks, Bill.

Bump for the weekend. Sorry for the delays I had a relapse of whatever's been making me sick the last week and half. I have replied to everyones em and pm. Thanks for looking, Bill.

Bump. Just to let you know, I can deliver to the Col area Tu-We this week. Thanks for looking, Bill.

Bump. Just to let you know, I can deliver to the Col area Tu-We this week. Thanks for looking, Bill.