Stampede

I cut the spring out of the other one. Stampede.

I found something like that also, but the book says different. I starting to really not like this car, and it's problems. Stampede.

I have an 02 Altima 2.5, my first issue is the blower motor only works on High, the manual says It does not have the resistor like the older nissans, and is controlled by pcm. Does this sound correct? Also, it seams that the t-stat is not opening, the bottom hose cold all the time, and the fans seem to run alot. And yes I changed the T-stat, what the heck is going on? Thanks.

I think I went there almost every weekend, when I was in high school. Stampede.

Do people still cruize there on the weekends? Thanks.

I'm not sure what is wrong with my home AC. The outside motor is not running, has power, but I can hear the coil humming. I pulled the main breaker and it's still humming. What do I need to test? Thanks.

with out spacers, on the front? Thanks.

I did replace the valve, it's leaking around the threads.

I have a leak around the one of the shrader valves threads. How do I stop the leak? Also, how much vacuum should be pulled for the AC system? Thanks.

Should I still be able to pull the engine with the stall, and leave the trans in the car? Also, what about the wiring harness, does it stay on the engine or do I remove it? Thanks.

It's a 3.1. Stamepde.

I need to go look at it more, I don't know what I'm going to do at this time. Stampede.

Right now I'm trying just turn the engine over to remove stall bolts, and figure out what happened to it. The story is, he was driving home, and the engine just died. I went to look at it, we pulled had the alter. tested, tested good. He pulled the started, and works fine. Motor will not turn over by hand. I'm don't sure if it's the engine or the trans. We will be pulling both, just because I can't turn the engine. I'm trying to figure out how to seperate the two. Thanks.

A friend has it, we can't get the engine to turn. I'm thinking that the trans is locked up. How in the Heck am I going to seperate the two? I'm thinking, removing as many of the stall bolts. Which will only be one or two, and chain the engine to his truck, chain the trans to my truck and pull them apart. I don't know what to do, ever had this before. Thanks.

Thanks.

A friend has this early 90s Lebaron, it over heats, from the fan not working. I'm going over tomorrow to check it out. First I'm going to jump the fan, to make sure it's not the fan. Would I jump the temp sensor or ground it make the fan run? What else should I look for? Thanks.

Can anyone post the assembly drawings of cams, front cover again? Thanks.

I've dealt with the pre-cat/ engine failure last year. After Nissan said NO to help me, cause I didn't have proof of oil changes. I've taken the exhaust covers off. Thanks.

I finally pulled the small cover off, the upper guide is not damaged. What next? Thanks.

Besides the Lightings, any Rams, Silverados? Thanks.

after driving, but can be bump started. It's a neighbor of mine, just trying to help him out. Thanks.

Don't get me started on Freaking Nissan.

Yes, there is small cover, up top across from the cams. Thanks.

Gearhead, I'll pull the smaller cover off, and inspect the guide. If that's not it, how much will you charge me, if I stop by for you to listen to the noise? Thanks.

I'm getting a very strange, and I mean strange, never heard before noise coming from the top end by the cams. It's a cross between a rattling, clicking, fluttering, and a early 90's diesel noise. It Doesn't do it all the time, it doesn't most after a good 15 mins or so, but when you drive it hard it's fine. I'm thinking it's the cam phaser, but I have never heard one going bad. What do you guys think? Thanks.