He cam up to me just 5 min ago and said he found a site that has new t3/to4 turbos for 175. Now I know those are good for iirc 400hp?? But he also said they did not list the man. name, which led me to think they are cheap china turbos that are not going to be very good. How much does a new t3/t04 turbo go for normally?
he has to measure for the intercooler still... how much power can those make??
those will be to small then for what he will use them for. they will be going on a mild built 390 with a blow through carb an he is aiming for 500 plus horse
Size? condition? how much for both? are those the k03 turbos?
I found this out about ten minutes after posting the thread but thank you.. As I stated I was hoping some local vendor like ips etc would be able to chime in and have something laying around
Where do you know is a good place to find those local or somewhere close??? Esp being a turbo we would want to be able to put our hands on it and check teh shaft play and the fins before he bought it so the forums is not esp a great place to trust someone and then have them ship the turbo to find out it needs rebuilt you know.
I was hoping rob had some laying around or someone from ips/ slomo etc had any old stock ones sitting around they pulled off say a evo or something..
anything wrong with it??? only problem is unless someone else has the same turbo they want to also get rid of It wont really help to much as we would need two of the same turbos but it doesnt matter to much what they come off of
LOL ya that was the problem I was running into is the dsm, audi, vw, dodge, volvo, sabb chrysler etc 4 cylinder turbos are pretty small. And the other like the subie, or evo ones are along with not bring cheap are not to easy to find used
Guy at work is building a galaxie and we were just shooting the breeze and now He is looking for two turbos for his setup..
I was loking to see if anyone has/ knows where to get two turbos from the ford 2.3l t motors or if someone has two turbos that are the same laying around...
they dont need to be big say like 60trims or so but he needs two.
so if you know of anyone or if you happen to have two stock turbos laying around please let me know
Ideas I had were the ford 2.3l motors, or sr20 turbos, or something to that effect. He will be making his own maifolds etc so the mounting flange on them doesnt really matter.
Thanks for any advice or direction to look for them..
Where do you reside? There is blackwing, the powder room in powel, buckeye outdoors in lancaster just a few for you depeding on your location in columbus to check out that I know has handguns you can rent.
How in the world do you love your highpoint, those are the biggest throw away guns every. I shoot more worth of ammo at a normal day at the range than those guns are worth...
Plus do you really want to trust something that cost a meir 100 bucks to keep you safe if you need it??? I rather fight with a baseball bat than a highpoint.
1911 for sure.... and go to a couple local gun shows you can find them pretty good price and it gives you the chance to hold and feel many different guns all under one roof
I dont know it does not give me the option for a four or a two door. If it doesnt move I say you would just need toe motor then the reg is like the guide for the window so if it is not off track or something like that you should just need the motor. check the readings on the motor when you push the switch up and down and then you will be able to tell if the motor is bad for sure...
napa on morse has it for around 120 ( I see our cost not retail so that is my best guess but should not be more than that... with a $12 core
one with the regulator is probably 220ish with a $21 core...
part numbers 4910009 and one with reg 4910011
they do not have the one with the reg in stock though, and the one on morse is the only one showing the motor in stock