WideOpenThrottle

I have a few cars I have purchased over the years and what I want. Is to take the body off of my big tire tube Chassis street car. And put the body from my 68 Fastback onto it. I know in retrospect it sounds easy but getting it exactly square and right is what I'm looking for. Does anyone on here do that? Or know someone who won't kill me on the price? Only 3/4 of an inch overall length difference and 1" in width

The bypass valve is working as it should. That was the first thing we checked. Yes sir. When I moved the pulley you could hear the rotors turning inside properly. Looks like I'll be giving them a call. I'm still at a loss

I put a new belt and idler on it. But the old one moves just as much as my 04 Cobra. We had the supercharger off and the snout didn't have play when twisted still moved appropriately.

Hey, So I recently got a 2006 Mustang that has the Saleen Supercharger kit on it. It has not been building boost. I took the upper and lower intakes off looking for blown gaskets and to no avail. The gauge is not reading a single pound of boost. I bought a new gauge thinking that was the issue and still reading 15Hg vac and no boost up to 6000RPMs. The supercharger makes no noise (whine) on high end and was making 12 pounds. I'm stuck! Any help or ideas or if there is a Saleen Guru somewhere near I'd be more than happy to pay him to have my boost back.

Littleguy, who is it that yours is through? That's close what I need

Who gives the best deals on Classic car insurance? I have had my '67 Camaro for two years now and I feel like I pay too much for this. More than twice what I do on any other car I have. I drive the car maybe three or four times a year and those are few miles. I use Grundy but wanted to see who everyone else is using. I have a spotless driving record. No tickets in 10 years and no accidents ever.

Well I'm thinking about swapping everything off from my 83 Camaro into my 67 Camaro. My question is what all will interchange? I know the motor will transfer just fine and the T-56 I'll need to cut the tunnel back some. But I have Baer brakes and coil overs. Will the brakes interchange? And will the 10 bolts interchange?

On that note anyone have any leads as to where can I pic up a 69-74 block? Or should I just go with a Dart block

I should also ask. Is that flywheel or rwhp

Shit. Just seen this on second page

I PMed you. My buddy wants to see them

That's more reassuring than what the Internet had to say lol. A lot of them said 600-650 Is there any way to strengthen it some to get another 100 out of it? I should be a little north of there but not much

Well this winter I have compiled a assortment of parts and have finally decided what I am building. My question becomes how much power will a 94 351 W block hold? And if someone is fluent enough (BC I don't want to make all the mods public) to talk about the numbers I will be putting down. My first 351 build and typical have built 302s. Short story is its a stroked 351w turbo'd. I want to know max HP people have seen from 351W and when people have had them split

I have a Weiand 4-71 blower I got in on trade and simply have no use for. What you see is what I have for it. It can be used with any setup with the proper lower intake. 400 http://i41.photobucket.com/albums/e297/jclay_13/310D06A4-1A10-44BD-A47A-1221EAE68B3B_zps3hcy1ih5.jpg http://i41.photobucket.com/albums/e297/jclay_13/428BB630-65EC-49A6-8F37-3002D44E683A_zpsugi0awac.jpg http://i41.photobucket.com/albums/e297/jclay_13/63DAC8D8-FB12-48CA-B3DA-7233818DBABA_zpsaslobt1e.jpg http://i41.photobucket.com/albums/e297/jclay_13/9A22F516-2CB2-46C1-9F33-84A104B38080_zpsctepdhgp.jpg http://i41.photobucket.com/albums/e297/jclay_13/DB32DD73-3C42-4A12-8435-F68E914A20E9_zpsz9rba0h6.jpg http://i41.photobucket.com/albums/e297/jclay_13/1911C832-9FAC-4A98-BF28-FB2800EC34AB_zpshsoibsaj.jpg http://i41.photobucket.com/albums/e297/jclay_13/7589C6C7-6D07-4056-AA15-4BFDFF2C5C65_zpshel901gx.jpg

I didn't say he killed it but they definitely are not hurting. And his wife took his balls when the piss test was positive. He knew he was owned lol

Good Vibes does have a lot of stuff. I need to figure out specifically what I need for this to be on a 302 or 351

How can I get ahold of them? It's hard to find Ford parts to match up to this. Tempted to just sell the unit but I have the full Cog set up and three new belts,

Or if anyone knows where I could pick up some pieces for one would be great

Thanks man. I appreciate it. Does anyone know of a good places to get a lower and a snout for it ?

I need to know so I can see about getting a lower and snout

I got a old school supercharger in as a trade. It looks like a 6-71 supercharger. The only casting numbers on it are MI ABF And 5157199 12 R 8 On the opposite. I can't post pics through my phone

^^^ if appreciate at least percentages of you're comfortable

The total loss took four months before they came out to inspect the car and months after that because they lost he title TWICE before I got the check six months later

They still haven't paid for bills from last year so I'm hesitant to do anything

They are asking me to sign a no future claim I did not claim lost wages since I work at a hospital True whiplash. I was rear ended by a Chevy 1500 pulling a dump trailer full going 35 mph. Against a 04 Civic. I lost