rb26deet32

Makes me want a fox body again... =-(

That's amazing. I want whatever camera mount he has :gabe:

I'm looking for something new. I've owned this car since the winter of 2005. I've owned 23 cars but this is the only one I've kept for more than a few months. I swapped in a full 3L swap from a 2004 Ford Escape into the car. Though I'm using a 3L Taurus uim. I also installed a spec stage 2 clutch, 70mm maf, 24# injectors, custom cai, msds headers, msds y pipe, flex pipe, high flow cat, custom 2.5" single exit exhaust and an aeroturbine muffler. I had the car tuned by Rob Lasota at Lasota racing 4 years ago. It made 222whp and 220wtq on a Mustang dyno. The best time I've ever ran in it was a 13.9 @ 103mph. The car itself has 150k miles on it. The engine has low 30's. It has black 17" wheels with polished lip wheels with decent tires. brakes are new, LCA's are new. Just installed new koni yellow struts, eibach springs and ground control coil overs along with new strut mounts and axles. The stereo is a generic alpine head unit with factory speakers. Now for the bad. The car is missing it's front bumper. I sold it when I was going to be parting out the car. There is also a little bubble on the driver side fender well. If I keep the car for much longer I'm going to be fixing it. There is also a mark along the bottom of the passenger side door where a mail man drove along side the car and brushed against my car with his big rubber bumper. http://mob35.photobucket.com/albums/d153/rb26deet32/IMG_20120105_170344.jpg http://images.craigslist.org/5I95H75J53M93Fe3L2c182a7bc5d6498c1371.jpg http://images.craigslist.org/5G45Ha5M53K53m63H7c181982f2365e251176.jpg http://images.craigslist.org/5L65Gf5M33Ff3m93N4c181f96fd531b781c33.jpg http://images.craigslist.org/5Nd5G85Mc3G93I13Jfc18f1e8217e2d8814a7.jpg Here are a couple videos too... http://www.youtube.com/user/rb26dett32 If you have any questions pm on here or text me at (614)625-7296. Thanks.

2004, we meet again.

I didn't watch the video but assuming it has racing I'm jealous. I'm moving.

Half of America wouldn't be able to walk through that let a lone drive through it. Because they're fat. Really fat...:gabe:

There were a lot of accidental shootings that night. Surprisingly there were even more stabbings I was sitting in the truck near Mt. Carmel West when all this shit started. First time I've ever heard shit like that outside of a video game.

I have a few dents I need to fix but I don't want to take it somewhere to have it fixed and I don't want to spend hundreds of dollars for the tools. So I'm just posting to see if anyone has some paintless dent removal tools that they would let me "rent". If you have some or know some one with the tools let me know. Thanks.

ROFLCOPTER :gabe:

Now work your magic on this... http://i35.photobucket.com/albums/d153/rb26deet32/12-1.jpg

People still wear flood pants?

Thanks. That's what I ended up doing. I did try what I was saying (cone/pencil way). I tried it on some scrap metal that was smaller diameter than what I'm welding and it was getting maybe 80% penetration. So I basically had a pencil that went to almost a flat head. Was easy as hell to weld since it was flat instead of round. But I think that was the longest constant welding I've ever done lol. It looks pretty good though. Just gotta grind it a bit and sand it and hopefully it wont break again. Thanks.

I decided to just start doing it. I'm grinding both ends that are going to be welded together into what looks like a punch. 45* chamfer going in but I'm going to leave about 3/4-1" flat so it will stay straight. Once I finish grinding on the other one I'll see if it's still lined up. Then I'll do some high temp tacs followed by some slow passes all the way around. And then I'll just fill it all back in. Also, I was using a miller 180 mig but now I'm using a miller 652 mig.

Anyone know if it's possible to weld a metal rod to another rod end to end when they are 2" in diameter? Solid steel. Just wondering if it's even possible before I waste any more time on it. I'm thinking if I chamfer all the way around and then fill it all in it should work. But I just don't know if it will penetrate all the way to the center...

:gay2:

Nothing that aids can't take care of :gabe:

the 4 eyes at 1:44 gave me a hard on :masturboy:

I'd be happy with a 4.7 second 0-60 :fa:

I never really liked grand ams. But after seeing these, I still don't like them.

What size tire are you running on the rear? 345 or bigger?

I concur :gabe:

I'm pretty sure they run that stock...

And I thought I was about to run out of fap material :masturboy:

Fuck Now let's see it on spray :gabe:

The Supra is just like mine. Except worse in every way...