rb26deet32

He likes even numbers. 1 knocked out person just didn't sit well with him. The guy who threw the brick could have argued that the brick only knocked him down. The head bouncing off the ground like a basketball is what really fucked him.

Pretty much any guy. :masturboy: But on a serious note, she must have done something. Or he REALLY likes her purse/hand bag.

I was really hoping that at 1:54 in the second video the fucktard was gonna take a bullet to the head while on cam. That shit just pisses me off. I gotta stop watching these videos. Too much rage :fuuuu:

It's because 90% of the time when nothing happens and police are on edge they get bitched at. And cops don't want to be the "bad" guy so they take it easy. I fucking hate people like that. But were there two cops there? I don't see why neither of them shot back. It seemed like they were just kind of running around.

I bet that guy has a huge penis. Seriously...:fa:

Looking at getting either a Rotary or Bendpak 2 post lift. That's in the $3,000 price range. If you have one or know of someone that can get one for cheaper please let me know. Same goes with the tig/mig setup. Just picked up two qtimax ingersoll rand impacts today. Now I need the tank/compressor and all the grinders that I'll need. Thanks.

I'm looking to fill up the new shop and as of right now the big things I need are as listed. -tig welder and cart -mig welder -2 Post lift -Air compressor and tank -Air tools (grinders/wrench/buffer) -Electric grinder -Ratcheting ratchets (metric and standard) -Impact sockets That's what I've thought of so far but honestly if you have anything your looking to get rid of that can be used in a shop lmk. Only restrictions are it must be in good condition and it can't be broken. Thanks.

I'm 90% sure that the spiderman spider. :fa:

I love how that car sounds. What kind of trans do they run? The sound that thing makes is almost boner inducing :masturboy:

:fuckyeah:

All prices are OBO. Also considering trading for things like... Tig welder 2 post lift air compressor/tools tool case work bench And anything else that could be used in a shop. Thanks.

Ok, I got a new car. Now I'm just looking to sell and get some spending money. New prices are Built b18b short block $2,000 Built GSR head $1,500 Willing to deal on everything else. Just let me know what you are interested in. I spent over $5k on the block and head alone. Thanks.

How does it do if your using a grinder? I've only used the monster ones or the really small ones. The small ones tend to turn on the second you pull the trigger. And the monsters seem to run for 5 minutes per day... If it's still for sale in about 2 weeks I'll take it off your hands.

So you haven't actually gotten a quote to do it from a shop or dealership yet? It's over $1,000 is you would so that's a good thing. The $500 range works because any less than that and the person isn't making any money. Any more and your getting taken advantage of. Also, is that using a Honda water pump and timing belt and replacing all the coolant? If you actually go to Honda they'll CHARGE 9.7-10 hours of labor to do it. Also, whether you have some one do it or you do it yourself make sure you only use a Honda water pump. I don't know how many autozone pumps I've installed and had to replace after a few months. On the other hand, I've never had a honda pump go bad. And one last thing. You said you don't know how long it's been since it's been replaced and so on and your at 230k miles. There is a good chance that your other belts and tensioner will be bad. My price is assuming all of that is bad. If it turns out to be fine then it costs less. I'd just rather quote you the worst possible outcome than add on additional things after I already start working on your car. Good luck!

If anyone has a 2 post hit me up. Thanks.

Hello, did you get this taken care of yet? If not I'm going to be doing 2-3 in the next 2-3 weeks. Do you already have the parts? (Honda water pump, timing belt) From what I remember the 2000 is a 3.5 v6? If so, you only need something like 4 sockets and a ratchet. If you go to Honda it'll be $974 + tax. Any other small shop will charge anywhere from $7-800. That's with parts included. I'm charging $500 even to do it and show you why you do everything. But honestly if you have all the tools you might want to consider doing it yourself. I consider it a very simple job. As long as you know how to time an engine it's fairly simple. Either way, you might have already taken care of it. If not, let me know.

Wow, good timing. I just sent a pm letting him know I wasn't going to be buying it lol. Now I'm looking for a 2 post lift. If anyone has one in good working order let me know. Thanks.

Do you know the dimensions? If so, what is the height of the beams and the max lift height? Also, whats the make and model and how old is it? Thanks.

I'm looking to buy another lift for the shop. Either 2 or 4 post. Last time I got lucky and got a 4 post for a steal. Any one know where I could pick up another? Doesn't need to be new, but that's always a plus. The 2 posts usually go for about $1,500-$2,000. And the 4 posts are about 3-4k. If anyone has one or knows of where I could pick one up for cheap let me know. Thanks.

I didn't realize they were speaking english til 2:07

This thread smells like sweaty ball sack on a hot day...

What do you need pictures of?

I'm thinking -8 and -10 but it's been months since I've looked at it. Setup was good for a lot of power

Bump it up. Looking to trade for either a good daily or a bike. Here is the complete part list to make it easier. 1992 civic eg shell with 6 point cage (stripped) -braided brake lines -new brake lines -s2k brake valve and reservoir -gsr rear disc swap -extended studs B18b1 block -0 miles since rebuild -81.5mm cp 9.0:1 pistons -Eagle Rods -Honda/ACL bearings -all new seals/gaskets/bearings -water pump/oil pump -All work was done by Jon Moore at Moorspeed Performance B18c5 ITR head -Oversized supertech intake/exhaust valves -oem valve seals/guides -accord LMA's -Complete Supertech valve train -Stage 3 port intake/exhaust -vtec solenoid -valve cover Tial 50mm bov Precision 46mm wastegate -tons of springs for boost from 4-32psi Precision sc6176 turbo -0 miles since rebuild -Journal bearing Neukin mini ram manifold -T4 -V band flange Neukin 3" downpipe -flex pipe -3" straight pipe all the way out the back Drag wheels and BFG tires -Both are brand new, never been driven on MSD ignition cap and boost coil NGK wires Pro comp gauges -A/F, Boost, Oil pressure Hasport Motor mounts -B series in an eg -Brand new Aeromotive a1000 fuel pump, controller Black nylon braided fuel lines and fittings for an eg/ek -Brand new, was going to use on the race car Aeromotive FPR I have pictures of everything. If you want to see something just let me know. But as of right now if you have something you'd like to trade just let me know what you want from the list and I'll let you know if it works Thanks.

He was on Tosh.o a few weeks ago lol.