Green Bastard

I DON'T KNOW WHY I'M YELLING, IT JUST SEEMS LIKE THE RIGHT THING TO DO THOUGH!!!!!

Only saws with 10 teeth or more will be classified as "assult saws".

Stupid zombie.

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/228042_350556428361172_356791983_n.jpg

If it is rear drums, check the wheel cylinders.

I was told that they tend to grow near dead elm trees.

INB4JP

Looks good, I love the black pipes. :masturboy:

LOL. Seriously though, I wouldn't say he shouldn't buy a rotary, I would say he should be well educated first though. Buster, if your seriously looking at wanting a car with a rotary, do as much research as you can first and ask many questions about it. There are some very knowledgable people here when it comes to rotaries.

Yes. If the OMP does not work, most people just add a couple ounces of 2 cycle oil to a full tank. I can't remember exactly how much or what the ratio is though.

Spark plugs and oil more frequently than a piston motor. Run the piss out of them, they love to redline (keeps carbon from building up and making an apex seal stick). And the #1 thing, keep an eye on temps. Rotaries do not take well at all to overheating. Another thing to look out for is the oil metering pump. If you go to buy one, ask the previous owner how often he has to add a quart of oil, if the PO says it does not burn oil then ask if they premix, if not, walk away.

I would replace the entire system (if you do it piece by piece as they break, you'd still end up doing the whole thing). You could prolly find a header back system on eBay for near the same price as the stock replacement.

That was me being sarcastic. I do very well know that a rotary can make power, torque isn't as good as a piston motor though from what I have seen. Besides, I know rotaries only get a bad rap because the ones that blow up (for the most part) belong to people who don't know how to take care of them. My issue with rotaries is efficiency, they burn more gas than a larger piston engine would. I have a rx-7 myself and I drove one for a while that was rotary. I explored the idea of building a rotary, but pistons seem better suited for my goals.

Power and rotary don't go together. Or is that torque and rotary? Prolly both...

He should have not tried to drive it home. Besides, who takes a car into a shop and tells the shop to only do half the job? I don't see where the shop would be responsible as they did what they were asked to do (though a compression test probably should have been done by the shop before it left since it was not running right).

http://i1073.photobucket.com/albums/w392/uummm1/IMAG0287_zps90aeb18b.jpg :gabe:

We are going to keep her until we find her a home. Thanks for the link though, I'll check it out.

^lol, I didn't know a better way to put it.

My wife was driving down Cleveland ave and saw someone just dropped this dog on the side of the road so she picked it up before it got hit by a car. She called the pound, but they said they would likely put her down and my wife didn't want that. She said the dog is a female and looks like it may have recently had a litter as her tits are hanging and looks like milk may be leaking out. My 1.5 yr old niece was around the dog and the dog only licked her face (seems to be child friendly). This is all I know about the dog, but if you would be interested in meeting the dog to see if you want her, feel free to pm me and I'll send my number. I would rather see her go to someone to take care of her than go to the pound and be put down. http://i1073.photobucket.com/albums/w392/uummm1/imagejpeg_2_zpsbbb32cae.jpg

It seems almost every day someone wants to cut me off on 161 on my way in to work, so these days I stay way behind the car in front of me just in case anyone wants to get in front of me in a hurry because they forget where they need to go until the last second.

If your worried about it, I would get the cam first, but not install it until you get the blower and do both at the same time. If your impatient though (can't stand to see go fast parts sit around) do the blower first.

I don't have any missed messages, I'll wait a bit and see if it comes through.

I saw this on another forum and thought it was pretty cool. https://maps.google.com/maps?t=m&brcurrent=3,0x355aa1972f683891:0x8f171aa8%20%2093a71634,1&layer=c&cbll=34.360366,132.48301&panoid%20%20=NqQ6Gywz3BY2yodcHmzPBg&cbp=13,266.31,,0,3.82&ie=U%20%20TF8&source=embed&ll=34.359364,132.483015&spn=0.003%20%2049,0.00751&z=17

I'm sure there is more to it than what just what the video shows. My guess is the marine cut off the guy in the truck and the truck rode his ass, and because of that the marine brake checked the truck a few times until it caused an accident. Sounds to me like it may have been road rage in both cases and video didn't roll until it put the people in the truck in a better looking position.