aussiek2000
Members-
Posts
515 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Store
Calendar
Everything posted by aussiek2000
-
We never sold any. People either bought standard 3.6 model or V car.
-
Front tires on my G8 are that size. I run toyo T1 sport. They did well at memphis road course/autocross, as well as on the street.
-
If ECM isn't tuner locked, have dyno Brian raise the speed limiter. Remember that the tires and driveshaft still have a speed limit though.
-
Easiest thing is just buy a set of drop shackles
-
Lower the rear. Antenna issues seem to stop at 2016 model year from what I have seen.
-
what model/year of caddy?
-
I went to the ohio energy site. Wanted fixed rate, no monthly fee, and no cancellation fee. AEP energy fit the bill. Also turns out I already had an account with them. Dropped my charge from 6.9 cents per kwh to 5.25 in a couple of clicks.
-
Drivers side spring is a pain because the front bolt is behind the fuel tank. But pretty straight forward job. Should be about to find springs fairly cheap online
-
Broke an axle on my car yesterday at 42, so I wont be able to make it today.
-
Consumer cellular for me too. Its like $35/mo for 5gb of data. The most I ever use is around 3, so it's perfect. I always have as good if not better signal than anyone else as well, not sure who's towers they operate from
-
hey, you never know. I'll be at pacemaker satureday, so hopefully nothing breaks
-
I'll be there unless its raining.
-
prepare to start fixing 9-speeds. We just learned today that the calibration initially used was wrong based on incrorrect trans test stand data. All 9-speed to this point are affected and most likely will require internal repairs due to slippage.
-
I love them, made a shit load of money fixing them. along with 11-15 cruzes
-
Just don't buy a 3.6 older than 2013 model year is my advice.
-
07-12 were the ones with most of the issues (timing chains, steering problems, transmission) 13+ had rear evaporator leak issues.
-
I hope to be there. I know i'll be at pacemaker the 6th
-
Lincoln https://www.autoblog.com/2015/12/02/lincoln-continental-spied-tow/ ford https://www.motortrend.com/news/spied-2016-ford-f-series-super-duty-prototype-goes-down-in-flames/ jaguar https://www.autoevolution.com/news/jaguar-suv-prototype-breaks-down-at-the-nurburgring-video-84699.html
-
I don't even want to work on them. Nothing sounds fun about mid engine
-
I'll do my best to make it. Trying to get some buddies to bring their cars
-
2012 Silverado 2500hd p0171 p0174 too lean vortex 6.0
aussiek2000 replied to cdk 4219's topic in Tech and Tips
#1 cause on those truck is people forgetting to hook the PCV pipe back up from the passenger valve cover to the intake tube. Have to lift up on engine cover to see it -
LS engine parts (243 heads, 6.0 rotating assembly, intake/injectors
aussiek2000 replied to aussiek2000's topic in LBTS GLWS
All parts are sold -
Hunter Motorsports is based out the scottsdale area I believe. He's one of the premier transporters in the US as far as I'm concerned. Hauled a McLaren Senna the other day. He's usually running back and forth between the coasts, so I'm sure he could fit you in. https://huntermotorsportsaz.com/
-
wheres the "like" button when you need one
-
LS engine parts (243 heads, 6.0 rotating assembly, intake/injectors
aussiek2000 replied to aussiek2000's topic in LBTS GLWS
yes, engine was a 2008-2009