coltboostin

I may something you could use. Shoot me an email and I will send you pics

Quite disappointed that this thrash all but killed my SO weekend Long story short- I was full blasted at a house party- and was rescued by Grassroots Matt and crew to come Mod some time after midnight. With the help of Supra Vlad, Angry Matt, and Ben BMX- the car was ready to fire at 5am-only to find out the fuel tank I was given many moons ago had a dead pump-after that I threw in the towel. I continued to party-passed out-and woke up at 4pm dazed an confused :rofl: Big thanks to Super Modder Vlad, Matt, Serge and Ben for getting the car literally ready to fire Saturday night. We did what takes most people MONTHS, in less than a week on 10pm or later mod sessions. I am hung over, and beat from a golf outing today-so we will replace that pump and see if she fires tomorrow. This will probably be the last SO thrash I do on this scale unless I am unemployed an have all the time in the world!~

Indeed! Just heavier. Hopefully I will look like this in another 10! Update to come here made a TON of progress last night- but I am going to a party and may be unable to work on it after :no:.

Raceing this weekend?

Good work! What boost? Your torque number is scary.

Sold! If you see it at the Shootout-it aint mine! Going home to Arkansas

As for THE COLT- I ran into an issue-clutch. I have a 2600, but no good aftermarket discs or flywheels for a FWD. I also have a AWD PTT twin disc, but we all know that wont work in a FWD bellhosuing, right? Out comes the grinder! http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/starter001.jpg The AWD flywheel is a little more than an inch smaller than the FWD-so I figured I needed the starter to come down at least 1/2 an inch. There is no way to do this on the trans really. You cant to grind that much off the bell housing without destroying it, and I wanted whatever I did to be repeatable in-case of trans failure. So what I dreamed up was to stud/brace the dust shield (IE/cut a bolt in half and weld it to the shield) for the lower starer bolt in a new position that will engage the AWD flywheel-and hog out the hole in the plate-retaining the top bolt for maximum stability. http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/starter003.jpg http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/starter002.jpg The test rig with AWD flywheel and clutch-she works!! http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/starter004.jpg It may be the first ever, but I am not sure anyone will be in a hurry to repeat this one. But for now- problem solved. PR fabrication FTW once again. PR+Coronas+no sleep= http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/starter005.jpg Still a long way off as there is NO fuel system, IC. some wiring..ect. We will see.... Back to work.

You were being nice.

Just an FYI if you are home shopping the Credit score you pull is 99.9999% of the time not the same one I pull!

Or at least on the back of my closings :rofl: http://fox8.com/2012/08/13/nations-lending-corporation-great-mortgage-give-away/

Everyone has there Vegas stories and tips. I will just say if you are into the club scene, or want to be a true savage, shoot me a PM and I will get you in touch with the right people. Since your going with your girl though, I dont think you are going to be on my level. Vegas is whatever you want it to be. The best shows, the best whores, the most fast money you could ever ask for. As long as you are having fun, you are doing it right. And LOL that someone actually stayed at Bill's Gambling Hall. That place needs to be condemned!

Going to be interesting to see how many of these turds are at SEMA

I dont know-I just put a motor together with a rust block that has an unknown deck surface and a Head I pulled out of a junkyard car 2 years ago. Billy Bob's surfacing would have been an improvement. :lolguy:

I'd say Fusion was easier-as it was running before it went into Mothballs, and I was not working so many hours during the week!

Many general automotive shops actually use a large belt Sander for surfacing......Not much different But I love the DYI

What is the benefit of reverse manual-so you can go directly to N form any gear without R in the way?

I dont think I have ever seen one white- great looking car!

Built? Stock for that car correct? manual VB=manual shifting and Reverse Manual=use of a "trans break" correct?

Found a useable Head Gasket and some studs and slammed the head on. I am not sure the intake manifold is going to fit (may interfere with the clutch master) so it is loosely bolted up for now http://i1003.photobucket.com/albums/af154/coltboostin/THE%20COLT%20v2/COLT.jpg Went to storage and got a couple of bins full of goodeis. I should have enough to do an intercooler set up, all fuel (including cell, the car has no gas door!) and a few odds and ends. I should be ready to start the car with what I have there. 100% spare parts build looks achievable!

It has to line up-otherwise it would not work. What trans int eh Camaro?

http://www.speedwaymotors.com/LS1-Engine-to-GM-Auto-Transmission-Adapter,8701.html It seems the correct flex plate is all that is needed? No mention of other issyes mounting a 350/400 to a LS motor

Ok I need more transmission Clarification- On the 4L60 and 80e- why do they seem SO much more expensive to mod, and in "built" form than the 350/400? How much can the stock 60/80E hold realistically?? Also any difference in the 4.3 Slush boxes? It has been mentioned the 350/400 bolts up- but is missing a few locations-does it BOLT UP or not?? LOL does the input shaft line up correctly? As for Manuals-does the T5 out of trucks work? Does the T5s out of 4.3 V6's work? Same mounting as a Ford T5 (that is in the car only reason I ask!!)

Yes-Head is on-Motor is 100$ assembled sane timing belt-Made a parts run to my storage Unit and found some more goodies. I should have enough to put the car together with some Swag. Weather it will be done for the shootout still remains to be seen. I wont be able to work on it much until Thursday

I'm running them-I poped one off any they crushed to spec. The are also to many other "used" parts going in this build to be worried about one sketchy element. The whole thing is sketchy!!! :lolguy:

Really-the tabs are just locators. If the set up is f-ed, the bearing will be fucked either way. I just dont like the way it looks!!