KentStateTsi

yes the extra is built and ready to fly. no fuel included and you will also need an electric or hand crank pump. the flash 5 is already trimmed out for the extra as well on memory #1. the train layout is built on a 4x8 sheet and is an overlapping figure 8 if that makes sense. only 1 track but i have quite a few engines and cars. i have pics of all the aircraft and will gladly take some of the train stuff. only thing is i have no place to host them and i'm not allowed to post attachments.(due to low post count i think). if you have AIM i'll be online for a while...or post an email addy. thanks

3 electrics: elipstick 460 75% done, profile p-51 90% done, zagi400x wing and motor only. i have a box of servo's, speed controls, batteries (nicad and li-po), a charger and lots of misc stuff. all 3 planes and box of stuff that will work in any of the 3..$150 1 gas: extra 300 with OS 25fx, 4 std servos, receiver, and field box. $125 add a hitec flash 5 radio to the above for $75 eflight blade CP pro with carbon fiber main and tail blades and aluminum swahplate. charge it and go fly! $250 VERY willing to work on any price! i even have an N scale train layout if anybody is into that stuff. aim KSUKidd18 or pm me here

http://www.amsperformance.com/store/product_info.php?products_id=1333 if anybody see's them cheaper let me know.

i just had a cyst removed from my face and doc says 10-15 days to heal...plus a little partying time. so i'm thinking 3rd week in Feb. not looking forward to my "peanut butter" shot

i too am leaving end of Feb for bct....what sucks is you will only get 10k of your sign on after bct..the rest comes in installments each year. my sign on, bct pay, ait pay will all be spent on a nice ride. i'm tired of being 23 and driving a minivan.

meijer in lewis center had about 10 of them when i got mine tonight(19.99) . i however cannot get it to stop spinning ccw. by far one of the best rc aircraft i've bought but i still like the aerobatic potential of my bigger heli's and planes.

i just took my hunter engineering alignment tests this week and i can tell you that 90% of cars do not have adjustable caster from the factory..especially strut vehicles.

only complaint i have is that my 13mm craftsman wrench slips on inner tie rods that are stuck when doing alignments....and i have yet to find a tool guy who can get me the ratcheting chrysler inner tie rod tool.

off topic....but will they do blacklight ink? btw...looks good man

i have never had a single problem with my craftsman tools....or even my ampro (advance) air tools. ...until they consistanly break i see no point in getting a $500 impact...or a $250 set of stubby flex head gear wrenches from my cornwell guy. aside from the work at home for a few years while in school...I have only been a tech for 3 months and have approx 5-6k in tools. i easily spend $150 a week on both the s&k and cornwell trucks....I dont have a huge box either probably only $900 with the workbench next to it.

xbox 360 rc heli as well...e-flight blade cp pro with carbon blades and aluminum swashplate and rotor head! gift cards no car parts more gift cards 2 of my friends home from Iraq

he did the "whistle" song...there was a nice vid of some college girl doing a semi-stip to. was posted earlier this year though. maybe last year.

if you can find one that doesnt care that you have your buddies over in the garage till 4am, doesnt mind you getting clothes dirty, and doesnt get pissed when you spend money on parts instead of diamonds for her let me know. and finding a girl who likes the same stuff as you could be bad as well. too much in common leads to being bored with each other. and if you want a lot lizard...go to Pilot on 71/36

how about a black 91 sonoma std. cab. carb'd LT1 with edlebrock manifold and carb. hedman headers, MSD6AL w/ 2 step module and adjustable pill. TH350 trans with b&m street/strip shift kit. JEGS brand 2200stall convertor, edlebrock nitrous kit. cragger D window wheels with nitto 450's up front and 555's in the rear.

93-94 black top CAS ..............$50 2g MAF harness(so you can do a 2g maf in your 1g) $10 97-99 turbo high wing, black great shape. $50 2g cloth interior..front and rear seats, all rear plastic, rear 6x9's, black steering wheel and both good airbags....$40 for all 2g fwd pump unit $10 2g fwd sending unit $10 1g bov uncrushed $25 1x 15x10" weld draglite, never used dual drilled fit on my 2g fwd but you will need spacers $50 2x 2g turbo fuel rails $5 each 1g intake manifold powdercoated red $20 need this stuff gone by friday afternoon or its going to the scrapyard. no paypal, no checks, no shipping. dont like the price? make an offer.

amateur radio ---KC8RIE AMA(academy of model aeronautics)---yes i'm a geek and fly RC planes and heli's SME(society of manufacturing engineers) some ASE certifications wasted a shitload of my parents money going to 2 schools for 5 years and only getting an associates degree. I've played with an irradiation machine that Kent State owns half of and its freaking cool. i've superglued (CA) my eye shut and had to have it cut back open. i didnt learn my lesson with my 1st gen dsm so i bought a 2nd gen off a girl i USED to date....it crankwalked 8 months later. being named brian and owning a 2nd gen unfortunatly aquired me the name "Spilner" and UNOH.

the bearings in the ac clutch and compressor. i guess moving it by hand was too slow to feel anything.

scantool shows IAC movement when ac kicks on...problem solved. thanks guys

i'm working on this truck for a friend. when any hvac setting requiring the ac pump to turn on the truck will almost and sometimes stall. the pump turns freely on its own, the IAC works. i can turn the biss screw up to where it wont stall but when the pump turns off its idle is at 1300. no vacuum leaks, only time it does this is at idle, highway driving is fine.

I have a global extra 300s with a brand new OS .25fx and a hitec flash 5 radio, all hitec servos and a JR Rx battery. ready to go with all field equipment and half gallon of fuel. plane has 15 flights on it and flys great. Included is a field box, starter, glow starter, 12v charger with leads for trans. receiver, and glow starter. next is a zagi400x with 2 micro servos, hitec 05s receiver, motor, speed control and 2 batteries. everything is there it just needs put together. both planes are on channel 42 and could fly without buying anything else. everything except the zagi were purchased at hurricane hobbies this year. $300 for both i'll send pics to emails if you ask

white exterior, red interior, power steering needs fixed, digital dash, 144k http://www.kbb.com/kb/ki.dll/kw.kc.ucp?kbb.OH;;OH041;&43015&;670393&;;ucp;&16;OL;H4 any other questions ask $600 obo

slowboy 3500 clutch kit, sprung disk and new TOB, still in box....$250 slowboy lsd insert piece, new never used, still in bubble wrap....$125 255lph pump, new in package...$50 2g power steering pump..$15 2g turbo radiator $40 brand new timing belt and tensioner $75 balance shaft eliminator kit new in plastic $35 clutch and lsd combo $300 bs elim, pump, belt, tensioner combo $150 EVERYTHING LISTED FOR $450!!! IF YOU BUY IT ALL I WILL INCLUDE A 6 BOLT CRANK, 6 BOLT TURBO BLOCK THAT NEEDS TANKED AGAIN, LATE 1G HEAD THAT NEEDS WORK, 2G TURBO HEAD, AND 2 VALVE COVERS! AIM = KSUKidd18

http://www.390bike.com is cycle search team elite, do you know Andy Niles?

going to school in Lima myself....i can tell you that it wouldn't take a month for people who gave 2 shits to find out about your car, let alone 5. not saying that it doesnt exist. but there is an abundance of f-body people that go to school here that would find you and talk about you if it was twin turbo

i just spent $3,000 on them and i'm pretty pissed about there shipping/customer service/ability to package. everything i ordered online said it was in stock and ready to ship. 7-10 days and i'd have everything, 14days go by i call and they said they were waiting for a few parts. i asked them to send what they had. i recieve a big box packed with rolled up cardboard and my parts looking like they were thrown in. no bubble wrap, peanuts, anything.