-
Posts
881 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Calendar
Posts posted by Kip Drordy
-
-
How did you open the coolant reservoir without boiling hot fluid bubbling up everywhere?
-
Dude don't lie, you know you took that cap and put it into your pocket protector for safe keeping...
-
The mobile site sucks ass. For some reason I can't access the true "site" anymore with my phone, only the green mobile one.
-
where spain when may or june.
John that sounds like the kind of trip shittygixxer would throw together, you should get in on our trip to myrtle beach if we go again.
If John goes plan on double the ride time:wheelchair:
-
Got one
-
Why didn't you ever tell me that you had such a stellar performance in your acting debut and it was such an entertaining one at that.
I didn't play Han, but his character was based on my life in Japan before I swam to California to make a fresh start in the States.
-
i didn't.
they are still on. bearings are under the caps. as per the manual there is nothing that goes where you circled, just the mating between the two cases.
but way to scare me though.
Those are your rod end caps, not your main bearing cap. The main bearing caps hold on your crankshaft, not your pistons. But, I guess the lower case works as the cap also.
-
woah
-
+1 for suicidal. seems possible, if bird can do it why can't humans? crazy logic
Crazy indeed. A bird doesn't need to be going a hundred mph to generate enough lift to fly. Just like an airplane, if the giant flying squirrel guy isn't going fast enough he'll fall out of the sky like a stone, then SPLAT!! human marmalade.
-
isn't that 10/22? if it is... you look like an ass right now. And if it isn't well you still look like an ass right now.
What the fuck are you and Shitty talking about?
you guys won't be able to keep up with the guy on the duc. shitty will end up in the ditch faster than he did the last time.
O snap!!
<--trying to find the picture McLovin had
-
Priorities suck...
-
Aced it:banana:
The one about the murder had me on the fence though...
-
they had that bike on superbikes... they were talking with the wheel designer, he was saying you could etch the clear wheels and add LED's to the hub to light 'em up... that'd be pretty pimpin', also talked about clear hoops too to make the whole wheel see thru.... that'd be kinda interesting to look like your bike was floating on your tire....
-
I was assuming he knew better than that!
You never know...
It isn't the end of the world, but I heard a certain *cough* Benyen Soljax over filled his oil once and payed for it with hours of cleaning.
-
haha nah bro the oil is drained and filled back to its recommended level. id never start it with that much in there.
ok i talked to a couple people, mello maybe you would know something about this since you have a gsxr. i am told that the plates do not usually sit in oil they are only lubricated when the bike is running. so the thought is that maybe the plate fibers are saturated with oil causing them to stick. i was advised by one person to drain the oil completely and let it sit for 2-3 days. if i do this then the fibers should have drained any oil theyre holding. if i do not do this then when i pop it into 1st that will free the plates but i have read that this may cause the fibers to tear although i am told this is not likely. any thoughts on this?
When I took off my clutch cover very little oil leaked out, so no the clutch doesn't normally sit in oil at rest. Not sure if that's your problem, but it wouldn't hurt to try
-
I say start it up and let it get to temperature and work the clutch a few times. Then pop it in gear and see if all is good.
Don't do this with 2 gallons of oil in it!!!
-
word.
I dunno if it would cause this kind of problem but torquing down the sprocket in gear wasn't the best idea
-
This would have nothing to do with clutch engagement only gear selection.
-
What is the sprocket nut's torque spec.? I didn't know so just made it tight. The only thing with your problem I can think of would be the cables... no, wait, maybe when you didn't put the little clamp for your shift rod back in the right position. I remember I used a sharpie and drew an x to align for when I put it back...
There should be a little dot on the rod that aligns with the gap in the clamp.
Again, double check everything, and make sure the cable is installed correctly back in the sprocket cover.
-
man the last one makes me look way more asian than I had hoped...
-
400 degrees! woah! We're talking less than 300 here.
But yea that would be the idea. I'll see what I can do.
-
So fake... Dude barely looks like Bruce.
But the phone is sweet.
-
'technically' didn't stop me from opening mine
-
For 08 ZZR600 or ZX6R 98-02:
I cracked my left headlight lens (plastic) and looking for one.....all I am getting is the whole headlight housing around 235 bucks...really unnecessary...anybody have any clues where to look at....I did search ebay, motojunk yards....anything specific where I can look into ? I am surprised that it is not even available as OEM parts...you have to buy the whole of it
Thanks in advance
Hey I have a friend who is in need of just the housing, but her lens is in good condition. Want to work something out?
Today's humor - Washer fluid
in Dumpster
Posted
What?