Jump to content

Fork oil amount


Jst2fst

Recommended Posts

More than likely I'm asking a stupid question here. I'm trying to verify the correct amount of oil to use in my forks. I was looking at the specs and it says 110 I'm assuming mililiters. Then next to it is says 4.3 no indication if thats ounces or inches.This is for my bike an '03 cbr 600rr. Can someone help me verify this level thanks.

Link to comment
Share on other sites

110 milliliters is the right range for fork oil. But not for a 2003 CB600RR

110 milliliters is 3.72 US fluid ounce.

I have no idea what 4.2 would be.

It's not on this very handy conversion.

http://www.amazon.com/Anchor-Hocking-5-Ounce-Measuring-Glass/dp/B001QYAGO4/ref=pd_sim_k_1

41hW4LXeI0L.jpg

Edited by ReconRat
Link to comment
Share on other sites

Found it. My copy of factory service manual says:

Recommended Fork Fluid:

Pro Honda Suspension Fluid SS-8

Fork Fluid Capacity:

531 +- 2.5cm3 (18.0 +-0.08 US oz, 18.7 +-0.09 Imp oz)

It also says to then measure level: (from top of fork down, after pumping forks to remove air)

Fork Fluid Level:

110mm (4.3 in)

a cubic centimeter is the same liquid size as a milliliter.

Edited by ReconRat
Link to comment
Share on other sites

if you're wondering how much to buy then it's usually just one quart for both forks.

you want to fill the fork without the spring in it to a specific height in the tube. you'll need to measure it or use a fork oil height tool like this, http://www.motionpro.com/motorcycle/partno/08-0121/

this tool allows you to just pour in the oil then set the level on the metal tube with the stop and suck out the extra oil. way easier than measuring it with something.

Edited by serpentracer
Link to comment
Share on other sites

When you change it be sure to measure the distance from the top. If you don't get it all out it will be wrong. And you could end up with two different levels. A coat hanger and some plastic tubing really make that easy and accurate.

Different bike but nice write-up here on what I mean.

http://www.gadgetjq.com/vulcan_cartridge_fork_oil_change.htm

Link to comment
Share on other sites

I got one of the forks apart an drained the oil it was a dark gray color. I'm gonna ghetto-engineer an seal driver out of some pvc an some scrap metal to compress the spring so I can get it back together. Ran out of time last night so that's on the agenda for today.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...