RidersDiscount Posted September 18, 2014 Report Share Posted September 18, 2014 For those interested we will be posting some aftermarket parts and gear driven more for Harleys. I will put these all in one post so if interested, check back now and then. Today's first post is: Cobra 4" Slip-On Mufflers Getting tired of the look and sound of your stock exhaust? Order a Cobra exhaust from Riders Discount for your Harley-Davidson today and instantly turn heads with some of the best sounding pipes on the market. Available as slip-ons pictured here or full exhaust options, if you want it we have it for you. Installation is easy and pain free. Simply loosen the clamp on the OE exhaust, remove, and replace with the Cobra slip-on exhausts. Brackets are welded on in the exact same position as stock and the proper indents are added where necessary to fit around a frame or bracket, depending on your model. A variety of end cap options are available as well. Shown here is a straight cut with billet tips. However, you can choose from:-- Upper cut (bottom edge extends farther than the top)-- Slash cut (inside edge extends farther than outside edge)-- Slashdown (top edge extends farther than bottom)-- Scalloped (top edge extends farther than bottom, curved) When you order your Cobra exhaust, ask about adding a jet kit if your bike is carbureted, or fuel management system if your bike is fuel injected to complete your order. Adding these pipes will make your bike run lean causing decel pops (backfiring) and generally rough ride. Cobra kits have everything you need to help your engine breather properly. Not yet listed on our website, to order your exhaust or if you have any questions, give MIKE a call at 866.931.6644 ext. 804 or send him a message through this forum. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Quote Link to comment Share on other sites More sharing options...
Hoblick Posted September 19, 2014 Report Share Posted September 19, 2014 nice! most people don't know you guys can get a TON of harley aftermarket stuff.paul yaffe, la choppers, and the like. you guys carrying the ohlins shocks and fork cartridges for harley FLH series? Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted September 19, 2014 Author Report Share Posted September 19, 2014 nice! most people don't know you guys can get a TON of harley aftermarket stuff.paul yaffe, la choppers, and the like. you guys carrying the ohlins shocks and fork cartridges for harley FLH series? Thanks for the post up, we do carry the full line of Ohlins products which would include the Harleys as well. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted October 3, 2014 Author Report Share Posted October 3, 2014 (edited) Designed to bring your old 90's era lighting technology into the 21st century, the Kuryakyn Panacea LED taillight available from Riders Discount improves your visibility by way of LED technology resulting in brighter light unaffected by your Harley's vibrations. Everything you need to install this is included, just let us know what particular year and model your Harley is and we'll take care of the rest. Going clockwise from the top left - Deluxe Panacea Taillight, Gasket, Twin Cam Adapter Harness, Accessory Harness, "Inverted" control tab, Load Equalizer, Evo Style 1157 Socket Adapter, Panacea Control Module. Also included but not pictured is dielectric grease and LED fender tip replacement chip. While this may look like a lot of wiring to install, it's actually incredibly simple. Everything is plug-n-play using stock OE connectors. The Panacea control module (pictured here) allows you to control the function of the taillight and turn signals (optional, sold separately). On the right, simply select whether or not you have stock or Panacea turn signals installed. On the left, select which function you would like to use. When Panacea mode is selected, this will flash your brake light when triggered bringing more attention to the rear of your bike and will also double as an integrated turn signal within the light itself. Pictured here is the Panacea Deluxe in smoke. The Panacea is also available with a license plate window, choose from red or smoke covers, and Laydown (essentially without the silver accent piece in the middle). Available for most Harley-Davidson models from 94+ Complete the kit by adding the Panacea turn signals to your order. Not yet listed on our website, to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Edited October 3, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted October 17, 2014 Author Report Share Posted October 17, 2014 (edited) New from Speed and Strength is their SS600 3/4 helmet available from Riders Discount. Pictured here is the SS600 Speed Shop graphic with a matte black base with gold (pictured), silver, and orange graphics. Flat and bubble shield accessories are also available as additional options. Intermediate oval with fitment that is true to size, the quilted comfort lining not only looks good but feels good as well. Control the ventilation throughout the helmet with two intake and two exhaust vents. To order yours, send MIKE a message through this forum or give him a call at 866.931.6644 ext 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Edited October 31, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted October 24, 2014 Author Report Share Posted October 24, 2014 (edited) Mustang Seats are the largest manufacturer of aftermarket solo seats, and it's easy to see why they have become one of the most popular seat options for cruisers. If the stock seat just isn't' working for you, whether it's the look or the feel, Mustang Seats has a solution for you. Shown here as a studded solo seat for the XL, Riders Discount offers every seat option available from Mustang Seats for your Harley-Davidson. Do you not want studs? No problem. Want a passenger seat? No problem. Whatever you need, we can help you. Each seat comes with a one year warranty covering defects in material and workmanship. Each seat comes with OE mounting solutions, meaning all you have to do is remove your old seat and replace with your new Mustang Seat. Easy as that. These are not yet listed on our website so be sure to give MIKE a call at 866.931.6644 ext. 804 or send him a message through this forum to order yours today! Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Edited October 24, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted October 31, 2014 Author Report Share Posted October 31, 2014 Is the stock audio system on your Harley just not putting out enough volume, or are you struggling to hear your tunes while cruising down the highway? Check out this all new system by Rockford Fosgate available from Riders Discount. Available in complete 2-channel or 4-channel system, the amp and speakers are made specifically for Harley-Davidson motorcycles from 98+ with factory installed audio systems. Includes a Matched Amplifier and Speaker Set, Amp Mounting Plate, and Wiring Harness Rockford Fosgate is primarily known for their high-performance car audio but have branched out into the two-wheel industry to provide quality sound for your motorcycle. 70Wx2 speakers put out some great volume. Dimensions of 6"x4"x1.5" for the amp means you can install it virtually anywhere. Available for Harley Davidson’s Street Glide, Electra Glide, and Ultra models. This is not yet listed on our website, to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Quote Link to comment Share on other sites More sharing options...
Hoblick Posted October 31, 2014 Report Share Posted October 31, 2014 can you get the RF pbr300x4 amp? Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted October 31, 2014 Author Report Share Posted October 31, 2014 can you get the RF pbr300x4 amp?Yes, PM on the way. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 7, 2014 Author Report Share Posted November 7, 2014 (edited) Andrews High Performance Cams & Gears has available from Riders Discount options to change your drive ratio. Whether you want more power or to increase gas mileage, Andrews has an option available for you and your Harley-Davidson. These are not available on our website, so be sure to get in touch with MIKE if you’re interested or have any questions. You can call him at 866.931.6644 ext. 804, or send him a PM through the forum. If email is more convenient, feel free to send one to FORUM at RIDERSDISCOUNT dot COM and let him know that you’re from the forum. Shown here is a 30T power ratio pulley which can increase your RPM's by up to 3% for faster acceleration. Also available is the overdrive ratio (not shown) which reduced engine speed by up to 240 RPM at 60mph decreasing engine noise and vibration for smoother highway riding and increase fuel economy. Andrews rear belt drive pulleys are available for 2006+ Dyna's, and 1994+ Big Twins Harley-Davidson motorcycles. Edited November 7, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 14, 2014 Author Report Share Posted November 14, 2014 Available at Riders Discount is the Scorpion Lock-Up Pressure Plate to add on to your existing Scorpion clutch as a direct bolt on. Included is the pressure plate, various clutch spring weights, and a clutch tool. This is perfect for high horsepower, large displacement motors! Three different clutch spring rates are included, from stock to heavy duty. This gives you the option to custom tune the clutch for your specific needs. If you are running with a monster engine, the heavy duty may be more your style. The Lock-Up Pressure Plate works by progressively increasing pressure to the clutch stack as the revs increase. Constructed from billet aluminum, this not only is extremely durable but looks great as well. Made in the USA, you can be assured of quality craftsmanship by Barnett. Available for Panheads and Big Twin engines with mechanical or hydraulic clutches. These are for use with an open primary cover or the Barnett Scorpion Primary cover (sold separately). This is not yet listed on our website so be sure to give MIKE a call at 866.931.6644 ext. 804 or send him a message through this forum to order yours today! Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 21, 2014 Author Report Share Posted November 21, 2014 Looking for an easy way to prolong the life of your engine? Try adding a Jagg oil cooler from Riders Discount. Jagg makes oil coolers in multiple configurations for a wide range of applications going all the way back to 1955. These oil coolers are not available on our website, so be sure to get in touch with MIKE if you’re interested or have any questions. You can call him at 866.931.6644 ext. 804, or send him a PM through the forum. If email is more convenient, feel free to send one to FORUM at RIDERSDISCOUNT dot COM and let him know that you’re from the forum. Despite some of them being designed for older models, Jagg uses very modern design elements to give their coolers what they call the “Jagg Advantage” in terms of performance and durability. One of the keys to their performance is the way that the internal surface of the cooler uses an efficient type of turbulator that essentially “stirs” the oil as it flows through. This insures that the oil has contact with a greater surface area without any pressure loss. Jagg also put a lot of consideration into the design of the fins on the outside of the radiator. Each fin section features mini-louvres that provide even more surfaces for the heat to dissipate from as the air moves across them. Jagg produces their oil coolers in multiple configurations for many models. These options include vertical or horizontal mounts, black or chrome finishes, and 6-row or 10-row coolers for those that want more cooling capacity. Those with Touring models even have the option of a fan assisted cooler for extremely efficient cooling at all speeds. The availability of these options varies between applications and some models require the use of an oil filter adapter, so be sure to check with us to see what your options are. A Jagg oil cooler shown here in the 10-row, low-mount vertical configuration for Harley-Davidson models. Plenty of louvres are crammed into the radiator in order to dissipate the heat as efficiently as possible. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted November 25, 2014 Author Report Share Posted November 25, 2014 (edited) Looking for some luggage to add-on to your bike without it looking like a cheap afterthought? As long as you have a sissy bar, check out the Saddlemen Sissy Bar Bag available from Riders Discount today! This particular model is the S2200E, however there are numerous options and styles available for sissy bar luggage add-ons accessories. Be sure to ask if you are looking for something else! With this Saddlemen bag, you get quality construction with a perfect blend of rugged materials that not only make this bag look tough, but is also weather-resistant and long lasting. Included is a one year limited warranty with every bag. This will work with any size and style sissy bar. Simply use the easy to use mount system, make the necessary adjustments and you're set. You'll never need to adjust it again. Measuring 18" H x 15" W x 8" D or 2,160 cubic inches as standard, this is expandable to 2,220 cubic inches via two side expansion zippers. 5 exterior storage solutions including an office organizer allow you to keep your things neatly organized and easily accessible. This is not yet listed on our website so be sure to give MIKE a call at 866.931.6644 ext. 804 or send him a message through this forum to order yours today! Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Also included are backpack straps, a shoulder strap, duffle bag, and rain guard. Edited December 5, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted December 5, 2014 Author Report Share Posted December 5, 2014 The Cycle Visions Bagger Tail kit available from Riders Discount allows you to install FLT style Harley-Davidson hard or leather covered bags onto your Softail. (Fits 84+ Softails, 2000+ Dyna, 04+ Sportsters ) These are not yet listed on the website, but you can place your order with MIKE by giving him a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Constructed of high-quality steel available in a black powder coat finish or chrome (pictured here). Installation is incredibly easy, as everything you need is included in the kit. The bars are also labelled so there is no confusion as to which side goes where. Dzus (pronounced like "zoos") fasteners are also included in the kit. These are quick-turn fasteners that secure your bags to the brackets. Give us a call to order your kit today! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted December 19, 2014 Author Report Share Posted December 19, 2014 (edited) Unbeatable looks combined with a truly wicked v-twin sound, you can't go wrong with the Vance and Hines Shortshots Staggered exhaust available at Riders Discount. With 1 3/4" head pipes stepped to a 2 1/8" muffler body and 220 degree coverage heat shields, dollar for dollar, this is an unbeatable system. Baffles, mounting hardware, and instructions are included for a hassle-free, perfect fit every time. Not shown is the various hardware also included. To install the exhaust, simply remove your old system and bolt in the new exhaust using factory mounting locations. The heat shields are clamped in place using the supplied clamps slotted through the inside of the heat shield. Vance and Hines exhaust systems are designed and crafted for maximum performance, a perfect fit, with great styling. Best of all, it's made in the USA. The Shortshots Staggered exhaust is available for - Harley-Davidson Dynas - Harley-Davidson Softails- Harley-Davidson Sportsters - Honda 750 Shadow Aero 04-13 (Phantom 10-13)- Honda 750 Shadow Spirit 07-09- Yamaha V-Star 650 04-10 - Yamaha Roadstar 1600/1700 99-07 An optional baffle is also available to lower your volume by an additional 2-3 dB on average. Note with any exhaust change it is recommend to adjust your fueling either with a jet kit or adjusting the settings on a fuel management system. Be sure to ask your Riders Discount rep if you need to order one. Not yet listed on our website, to order your exhaust simply send MIKE a message through this forum or give him a call at 866.931.6644 ext. 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Edited December 19, 2014 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted December 26, 2014 Author Report Share Posted December 26, 2014 Looking to add some more luggage space to your bike but haven't found anything that is reasonably priced yet doesn't look like a cheap afterthought? Check out the Saddlemen Express Drifter Trunk Bag available at Riders Discount. Constructed of rugged leather-grain, marine grade vinyl, and plastic reinforcement panels, this Trunk Bag will last for quite some time while maintaining it's appearance. Mounting is incredibly easy, with solutions for a luggage rack, sissy bar pad, or passenger seat. Use the D-rings and supplied straps to secure the bag to the luggage rack or passenger seat, or use the strap on the back of the bag to secure it to your sissy bar pad. Chrome buckle pieces cover a buckle snap allowing you to easily open the bag but with a classier look. Open the top for over 2,000 cubic inches of storage space. A interior mesh pocket allows you to keep smaller items in place along with two zippered and flap-covered pockets provide even more coverage on the side. This is not yet listed on our website so be sure to give MIKE a call at 866.931.6644 ext. 804 or send him a message through this forum to order yours today! Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted January 2, 2015 Author Report Share Posted January 2, 2015 (edited) This custom designed sleek looking digital speedo and tach combo from Biker's Choice is now available from Riders Discount. This Biker's Choice digital speedometer/tachometer features a digital speedometer with bar graph tachometer display along with all necessary display indicators such as high beam, neutral, oil pressure, turn signals, trip, and odometer functions. Listed for Harley-Davidson's with stock transmission mounted electronic speedo sensors on 94-present Harley-Davidson models. Available to purchase from our website here, if you have any questions regarding the Biker's Choice digital speedo/tachometer or if would like to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! With dimensions of 4"W x 2"H x 1"D, this mounts easily to virtually any handlebar with your choice of 1", 1-1/4", or 1-1/2" mounting brackets (sold separately). Easily wire this to a 5/8" or 12mm cable sender unit (sold separately). Use the two buttons on the back to control and setup your new display. Instructions are included and easy to follow. Chrome plated with a smooth finish, this speedo/tach kit will look awesome on any bike. Give us a call to order yours today! Edited January 2, 2015 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted January 7, 2015 Author Report Share Posted January 7, 2015 Arlen Ness' forward controls extension kit available from Riders Discount is an all-in-one solution to pushing out your foot controls an additional 3 inches to give you that extra leg room. Pictured here with the adapters, shift rod, brake line extension, and hardware. These are not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! This kit is made specifically for 2000+ Harley-Davidson Softail models and everything you need to install this kit is included. The adapter plates are black anodized and look fantastic, plus they are labelled so it's impossible to screw up installation. Anytime you change out brake lines it's a good idea to use new crush washers, Arlen Ness has made sure to include these in each kit. Be sure to give our expert sales staff a call for any of your Harley-Davidson needs! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted January 9, 2015 Author Report Share Posted January 9, 2015 A common misconception is confusing engine guards and freeway bars. Engine guards, like these Biker's Choice engine guards featured here from Riders Discount, are designed to protect the motorcycle as well as the rider. These engine guards are easy to install and are available in chrome or black for most Harley-Davidson motorcycles. These are not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Made in the USA with 1-1/4" steel tubing, these bolt in to existing mounting locations on your motorcycle. Installation is incredibly simple and can be done in 30 minutes or less on average. Shown here for the 09-present FLHT, FLHR, FLHX, and FL Trike Harley-Davidson in black. Mounting holes and position will vary depending on your model. Not only do these protect your bike, they add to the appearance of your Harley. Any necessary hardware is included with installation Give us a call to order yours today! Feel free to post up any questions you may have in the thread below. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted January 23, 2015 Author Report Share Posted January 23, 2015 (edited) An inexpensive way to tighten up the handling on your Harley Davidson touring model, the Progressive Suspension Touring Link available from Riders Discount will help stabilize your chassis by keeping the motor and swingarm assembly aligned with the chassis. The Progressing Suspension Touring Link is listed on our website. If you have anymore questions about the item or would like to place an order, give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Installation is incredibly easy and includes everything necessary for the install. Simply remove anything in the way from the right swingarm mount, remove the stock swingarm mount, and then install the Touring Link. Detailed instructions are included with the kit. Total install time is about 2-3 hours. The Progressive Suspension link does not reduce ground clearance allowing you to keep your normal lean through turns. Installing this link will virtually eliminate any oscillation you may encounter as the swingarm is prevented from moving laterally. Edited January 23, 2015 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted January 30, 2015 Author Report Share Posted January 30, 2015 What better way to turn heads than with the Vance and Hines Big Radius exhaust available at Riders Discount? One of the more unique, aggressive looking bolt-on exhausts on the market today, this exhaust can really transform your machine both visibly, and audibly. Available in chrome (as pictured) or with black heat shields for a truly sinister look. Scalloped end caps finish off the look of the exhaust If you want even more volume, the baffles are removable. Welded bungs for factory o2 sensors. Available for most metric cruisers and Harley-Davidson models. Vance and Hines includes everything you need for the install and bolts up using factory mounting locations. Not yet listed on our website, to place an order give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted February 20, 2015 Author Report Share Posted February 20, 2015 Looking for a fuel tuner? Look no further than the Cobra Fi2000R Power Pro available at Riders Discount. This fuel tuner is unlike any other on the market. This has the ability to tune every gear, and make adjustments according to the environment, riding style, or those new pipes you just installed. No dyno needed and no fiddling with a computer. As they say, "Just set it and forget it." Available for Harley-Davidson's and metric cruisers, we have all available Cobra Fi2000R Power Pro options listed on our website. If you can't find your model or need help placing your order, give MIKE a call at 866.931.6644 ext. 804 or send him a private message through this forum. The Cobra Fi2000R Power Pro tuner with auto tune gives you optimum performance and fuel efficiency with every squirt of the injector. Order your new Cobra Fi2000R fuel tuner from Riders Discount today! For a full review of the Cobra Fi2000R Power Pro fuel tuner, check out the Riders Discount blog for more photos and information. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted February 27, 2015 Author Report Share Posted February 27, 2015 Looking for a new seat for your Harley-Davidson? Check out the selection of seats from HardDrive available at Riders Discount! With waterproof leather and premium open cell foam cushioning along with standard or flame stitch patterns and lower back support, this quality seat will help you enjoy those long rides on the back country roads. Available for the Harley Touring models from 2008-15, if you have any questions about the seats or would like to place an order give MIKE a call at 866.931.6644 ext. 804 or send him a private message through this forum. If you'd rather, chat with us on our website or send us an email to FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Constructed using premium Mercedes grain leather which has a special waterproof finish, the seat has a luxury quality feel and look great with long-term durability. Each of the leather panels for the seats are cut by hand to create the best hide for each individual saddle. Once you sit in the seat, the first thing you'll notice is the deep bucket design with a low, deep riding position. Next, you'll feel the comfortable seat cushioning. This is achieved with premium open cell foam cushion that offers additional seat support with no break in period and virtually no breakdown or degradation. Also note the center support ridge that helps keep you in place and superior lower back support to help you relax on those long rides. HardDrive includes zing/chrome-plated mounting hardware that will prevent rust and keep your seat looking pristine for years to come. Full felt bottom provides a nice finish to the entire bottom of the seat. Available with a flame stitch pattern as shown here for extra flair or standard with no flame stitching. Interested? Give us a call to place your order! Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted March 13, 2015 Author Report Share Posted March 13, 2015 A license plate frame can be the final touch to complete your custom bike build, or it can be something to differentiate your bike from the rest. Whatever the case may be, Riders Discount has a selection of custom license plate frames for your ride. Check them out on our website here! If you don't see something you like or want to see what we have available for your bike, give MIKE a call at 866.931.6644 ext. 804 or send him a private message through this forum. These license plate frames featured from Biker's Choice are constructed from high quality aluminum with a shiny chrome finish. Options include plate orientation, mounting locations, light options, and so much more! Order your custom license plate frame from Riders Discount here. For a full review of the Biker's Choice LED license plate frame, check out the Riders Discount blog for more information and product photos. Quote Link to comment Share on other sites More sharing options...
RidersDiscount Posted March 20, 2015 Author Report Share Posted March 20, 2015 (edited) Change the look of your Softail with the installation of a Roland Sands Design Tracker fender kit available from Riders Discount. Available with either chrome or gloss black struts for your 1990 - present Harley-Davidson Softail, the RSD fender kit simplifies the back end of your Harley and takes a lot of weight off the rear. This direct bolt on fender kit really takes the guess work out of how to bob your Softail. Order your RSD Rear Fender Tracker Kit from our website here. Feel free to contact MIKE with any questions you may have about the product or need help placing your order. The RSD Fender kits are available in 7" or 9" fender widths for 150mm or 200mm rears. For a full review of the RSD Tracker Fender kit, check out the Riders Discount blog for more detailed photos and information. Edited March 20, 2015 by RidersDiscount Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.