Harley Aftermarket Parts & Gear

[RidersDiscount]

The original trend setters for extended bags have raised the bar even higher with the introduction of the Big Bag Saddlebag Kit available from Riders Discount. 

 

 

Available for the 1993-present FLT Harley-Davidson motorcycles with cutaways for dual, single, or no exhaust, the Big Bags are delivered to your door primed, prepped, and ready for paint.  The Arlen Ness Big Bags are available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

 

Installing Big Bags from Arlen Ness give you a really custom appearance with saddlebags that are longer than stock and offer increased storage for your motorcycle.  These are produced using state-of-the-art injection technology producing a smooth and finished product, both inside and out. 

 

 

Each saddlebag goes through an extensive 13 hour post cure cycle in a controlled oven environment ensuring maximum strength and temperature stability.  

 

 

These bags are jig drilled and tested to ensure they will easily fit your stock lids and hardware from your OE saddlebags.  

 

 

 

Installing these bags will give your bike a noticeable change in appearance that will really set your bike apart from the rest.  Arlen Ness has done what should have been done in the factory design studio and improved the appearance of your Harley Davidson.  Order your Big Bag saddlebag kit from Riders Discount today!

 

[RidersDiscount]

This massive motorcycle luggage bag from Kuryakyn is able to take pretty much everything you own but the kitchen sink on your next adventure.  It even comes with a cooler.  At just under 6500 cubic inches of storage, the Kuryakyn GranTailgater bag also features large compartments, dividers, backrest pad, and a pull out handle for easy transport.

 

The GranTailgater bag is weatherproof on its own but includes a rain cover for heavy storms.  

 

The Kuryakyn GranTailgater Bag is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

21" tall, 17" deep (+1.5" for the handle), and 24" wide.  We told you this bag was big, but you'll never have to worry about not having enough room when you have this bag installed.  Not only do you get the large main storage compartment, but you get six total side pockets, two on the front, and two on the top.  The front zips down into a mini table for fun on the road or access to the bottom of the main compartment.  

 

 

This bag can sit on a passenger seat or luggage rack, you can still ride with a passenger with this bag installed.  You can use the included cinch straps or combination of the cinch straps and velcro back flaps.  If you're riding solo and have the bag installed on your passenger seat, Kuryakyn includes a lumbar support you can velcro onto the bag for additional comfort on your ride. 

 

 

After you've arrived at your destination for the night, simply remove the bag from your bike and roll it into your hotel room or campsite using their pull-out luggage handle and wheels. 

 

 

Inside you'll find a cooler big enough to hold 6 12-oz cans of your preferred beverage.  

 

 

Kuryakyn is a well known name in the cruiser community and prides itself on quality built products that will last for years to come.  The GranTailgater is no different.  If you see yourself running out of space for your long ride adventures, consider ordering the GranTailgater bag from Riders Discount today!

 

Edited April 3, 2015 by RidersDiscount

[RidersDiscount]

This tachometer from Baron is beautifully packaged in a billet aluminum housing, polished to a show quality chrome giving you a sleek look to your bike.  

 

Available from Riders Discount, this is not currently listed on the website, but you can place your order with MIKE by giving him a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!  

 

This 8000 rpm tachometer provides crucial information on an easy to read back lit display available with a white or black face.  Shown here with the included tach adapter for bikes with single fire ignitions.  

 

 

 

Made for use on any bike with 1" handlebars, installation is incredibly easy with just two screws to clamp on to your bars.  Note: We also have options for 1-1/4" handlebars. 

 

 

The back of the tachometer is a clean wiring harness that easily blends in with the existing wiring on your bike.  Included are necessary butt and crimp-on connectors for a complete installation out of the box. 

 

[RidersDiscount]

Performance Machine, the number one name in custom brake calipers for Harley's and custom cruisers has a rear caliper kit for rigid frame motorcycles available from Riders Discount. 

 

Available in chrome (pictured here), polished, Contract Cut, or Black Ops.  

 

These are not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

This is a quality kit precision machined from billet aluminum.  The chrome finish produces a mirror like shine you can see here

 

The caliper is a four-piston, dual-action design for serious stopping power.  Brake pads are included.  

 

 

This Performance Machine product is made in the USA.  

 

 

This particular kit is for a 11.5" rotor and 1" axle, but we have kits available for all different sized rotors and axles.  All necessary hardware is included.  Give our expert sales staff a call for help finding the kit for your ride!

 

[RidersDiscount]

These driving lights from Kuryakyn give your ride an all new personality.  The aggressively styled halogen driving lights come in black or chrome finish with driving lights and dual function amber running/turn signal lights.  Made to fit the Electra Glide and Road King from 97+, and Street Glides 06+. 

 

 

Not yet listed on our website, the Kuryakyn Driving Lights can be ordered by calling MIKE at 866.931.6644 ext. 804 or by sending us a private message through this forum.  Is email more convenient?  Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Comes complete with the driving lights, brackets, wiring, zip ties, and mount hardware.  

 

 

The installation does not interfere with removal or installation of stock detachable windshield on Road King Models. This kit includes a 12-Pin Wiring Adapter that places control of the driving lights on the motorcycle’s Accessory switch on '98-'13 Electra Glides and Street Glides. If you already have accessories wired to this switch, you will have to choose an alternative wiring method (sold separately).

 

 

Available in black shown here, or chrome, give us a call to order your new lights today!

 

[RidersDiscount]

Arlen Ness has led the air cleaner market with their patented Big Sucker technology.  This new Inverted Series air cleaner combine the Big Sucker tech an inverted filter top that maximized air flow by pulling in air from the face of the air cleaner as well as the traditional method of pulling in air from the sides.  Forged from billet aluminum and available in chrome or black anodized, this is the best air filter kit offering both performance and style.  Different covers are available for this kit as well, pictured here is the 10-gauge. 

 

 

Available for 91-current HD Sportsters, 2000-current Big Twin (except for Fly-by-Wire models), and 2008-current FLT models.  

 

This is not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

All hardware and mounting gaskets necessary for installation are included.  Each kit is hand made in the USA.  

 

 

The pre-oiled air filter element is wrapped in a stainless steel jacket for the ultimate in style. This element features synthetic material that never needs oil, just wash and re-use for long lasting performance.  

 

 

The billet backing plate features Arlen Ness' proven radius inlet, hidden breather hardware and their industry leading Big Sucker patented technology.  The radius air inlet provides maximum performance by offering unobstructed airflow.  

 

 

Machined from a single piece of forged billet aluminum, the Arlen Ness air filter kit looks amazing in person and really adds to the appearance of your Harley.  

 

Edited May 15, 2015 by RidersDiscount

[RidersDiscount]

Give your ride a truly luxurious look and feel by swapping out your stock seat for a Saddlemen Lariat seat available from Riders Discount today!

 

 

The Saddlemen Lariat seat is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

The newest seat to Saddlemen's collection, the Lariat offers a rugged look using distressed saddle-brown leather with "heels down" seats that specifically position the rider farther forward for better foot control and lower into the seat for confidence while stopped. 

 

 

Hand-cut and sewn genuine, free-range cowhide create the signature look for the Lariat line.  No two seats will be the same due to the natural and individual characteristics of the Rodeo Brown leather.  

 

 

Each seat is wide, low, and supremely comfortable.  With carefully designed contours that allow you to plant both feet on the ground at a stop, the Saddlemen seat is perfect for those that want a bit more confidence at the lights.  

 

When you're cruising along the highway, it will be hard to find a seat more comfortable than the Saddlemen Lariat thanks to a combination of progressive density foam and SaddleGel which eases tailbone pressure and improves circulation allowing to ride longer and ride comfortably. 

 

 

Each seat is ready to accept a driver's backrest (sold separately) or passenger seat (sold separately).  

 

 

Made in the USA, order your Saddlemen Lariat seat from our website or contact us with any questions you have about the product.

[RidersDiscount]

Available for 84-95 Softails, 68-84 FL, 71-72 FX, and 80-86 FXWG models, this Biker's Choice Die-Cast Fat Bob dash cover is a chrome plated replica complete with lenses, lens retainer, hardware and mounting gaskets.  

 

 

These are not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

While the sides have a smooth chrome plated finish, the face of the dash cover has a textured finish.  

 

 

 

Lenses and lens retainer shown underneath the cover.

 

Give our expert sales staff a call for all of your Harley-Davidson needs!

[RidersDiscount]

So you just installed your new ape hanger handlebars only to forget that now all your cables are too short and won't reach.  Give Riders Discount a call to order a cable extension kit for your ride no matter if it's a 3" rise or a 20" rise, we've got kits for you. 

 

Clutch, throttle, idle, brake, and wiring kit shown here.

 

Not yet listed on our website, the cable extension kits can be ordered by calling MIKE at 866.931.6644 ext. 804 or by sending us a private message through this forum.  Is email more convenient?  Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

We can order everything individually or together, it's your decision.  If you need help deciding what's best, give us a call or send us an email to speak directly with our expert staff about ordering the right kit for you.  

 

 

Stainless steel braided jackets are available in sterling chromite, black pearl or polished stainless.  These non-yellowing lines have a clear outer jacket that protects your cables from scuffing your paint or chrome.  These cables also meet or exceed OE specifications for fitment, construction, and endurance.  

 

 

The electrical switch extension kits comes with terminals and pre-cut OE color matched wires as well as heat sink to give you a factory appearance once installed. 

 

 

Give us a call or send us a message if you would like to place an order for your cable extension kit today!

 

Edited June 5, 2015 by RidersDiscount

[RidersDiscount]

Tired of looking at your boring old dash on your Harley-Davidson?  Check out this Kuryakyn Dash Cover for your Softail or Dyna Wide Glide from Riders Discount for a fresh look on your ride.

 

 

Made to fit your 2000+ Softail or 1993-2003 Dyna Wide Glide.  For a full breakdown of what specific Softail models these will fit, be sure to ask your Riders Discount representative with any questions you may have.

 

 

This is not yet listed on our website -- If you would like to order, please call MIKE at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Very easy to install with common tools, this includes all hardware required for installation.  

 

 

For this or any of your Kuryakyn Harley-Davidson needs, be sure to give our expert sales staff a call today! 

 

[RidersDiscount]

Stretch out your legs and enjoy the ride with the HardDrive forward controls kit available at Riders Discount. 

 

 

Available for 2000-12 Softail's, 1991-present Dyna's, and 2004-13 XL' in either chrome, chrome billet, or  black (shown here).  These are not yet listed on the website but if you would like to place an order give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Everything you need is included for the installation.  A few basic tools are all that's required to install this kit. 

 

 

 

Interested?  Give our expert sales staff a call to place your order today!

 

[RidersDiscount]

Able to fit your 97-present Tour Pak box, this HardDrive Seatback available from Riders Discount is extremely comfortable and helps out your friend that's been asking for a back rest for a long time now.  Featuring a waterproof finish, this not only looks great but is very durable as well.

 

 

Not yet listed on our website, the HardDrive Tourpak Seatback is available to order by contacting MIKE at 866.931.6644 ext. 804.  Is email more convenient?  Send us a message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Constructed from Mercedes grain leather, the seating surface has a waterproof finish applied to repel water.  With heavy texture grain, each leather hid is hand cut to create the best finish for each individual saddle. 

 

 

 

Underneath you'll find a full felt bottom and zinc/chrome plated mounting hardware.  

 

 

Available in various different styles for touring models with either a smooth finish or flame embroidery, give our expert sales staff a call for any questions you may have or if you need help placing your order!

 

Edited June 24, 2015 by RidersDiscount

[RidersDiscount]

The all new Dakota Digital 7000 series gauge is a sleek, polished digital gauge that offers all necessary information in a large readable format.  Available from Riders Discount in three different styles, the 7000 series gauge offers numerous information readouts in a crystal clear digital format. 

 

 

 

Not yet listed on our website, the Dakota Digital 7000 Series Gauge can be ordered by calling MIKE at 866.931.6644 ext. 804 or by sending us a private message through this forum.  Is email more convenient?  Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Available in spiked, oval (elliptical), or classic shape shown here, the Dakota Digital 7000 series gauge offers a speed readout up to 199 in either mph or km/h, and a 0-8000 rpm bar graph with 0-16000 numeric readout.  

 

Other features include an oil pressure readout with included sensor, voltmeter, gear position, clock, odometer with dual trip odometer and countdown service timer, and fuel level gauge (if your bike is equipped with a stock sender).  

 

The mileage odometer can be set to match your current mileage. 

 

 

Necessary information lights are also included such as your turn signal indicator, high beam, neutral, low fuel, low voltage, service engine indicators.

 

 

 

Riser mounting brackets are also available for 1", 1-1/4", 1-1/2" handlebars.  If you'd like to place an order or are interested in pricing, give us a call or send us a message! 

 

[RidersDiscount]

These fork lowering kits by Burly are the easiest way to lower your ride and get the look nearly everyone wants from their front end.  Available today from Riders Discount, the Burly Springer fork lowering kit is made for the Harley-Davidson Springer Softail from 1989-2006.  

 

 

The Burly Springer fork lowering kit is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

In the package is everything you need to complete the installation: chrome compression springs, spacers, and bushings. 

 

 

Notice that the fork springs are progressively wound.  This provides a plush ride over common road bumps but will stiffen up if needed to prevent bottoming out.  

 

 

Made in the USA, installing this kit will lower your front end by 1-1/2 inches.

 

 

Order your new Burly fork lowering kit online or contact us with any questions you may have about this item or your recent order with us.  

 

[RidersDiscount]

The Biker's Choice Tachometer is a stock replacement with an 8000 RPM scale made to fit your Sportster and FXR model Harley-Davidson's.  

 

 

Available to purchase through our website, the Biker's Choice Tachometer is made to fit 74-83 Sportster's, or 82-83 FXR's.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

With an analog tach sweep up to 8000 rpm's, the Biker's Choice tachometer is a direct replacement.  Just swap out your tach cable, wire in the high-beam indicator and you're done. 

 

 

 

High-beam indicator

 

While you're browsing, be sure to check out our other Harley-Davidson gauges!  If you have any questions feel free to give our expert sales staff at Riders Discount a call today!

 

[RidersDiscount]

Universal for Harley-Davidsons, the Cycle Sounds Series 2 ULTRA speakers provide 150 watts of crystal clear audio.  Using an attractive, low-profile bullet casing, these 2.5" speakers attach via clamps to your motorcycles handlebars and can be pointed in whichever direction you choose.  

 

 

The Cycle Sounds Series 2 ULTRA speakers are available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

These wire in to your Harley-Davidson's stock wire harness via the included wiring and taps.  Mount the amplifier in the location specified in the included directions and route the 3.5mm jack up to your audio source.  This works with anything you can plug a headphone jack in to.  Whether it's your iPhone, old school tape deck, mp3 player, radar detector, or GPS, if you can plug your headphones in to it, you can use this speaker system. 

 

 

Cranking out 150 watts of audio, you'll easily be able to hear your tunes cruising well over the posted speed limit.  

 

 

All Cycle Sounds products are designed and engineered in the U.S.A. for all-weather stability and vibration resistance to ensure maximum performance in real world conditions.

 

 

Available today from Riders Discount, contact us with any questions you have on these Cycle Sound speakers or if you have questions regarding your recent order with us. 

 

[RidersDiscount]

US made and CNC-machined from aluminum, this Alloy Art Harley-Davidson frame stabilizer available at Riders Discount solves the problem of frame wobble and helps your handle better through the corners. 

 

 

The Alloy Art Harley-Davidson frame stabilizer is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Designed to fit the Harley Touring models from 2009-2014, this works with the stock exhaust and most aftermarket exhaust systems. 

 

 

All hardware is included and it is easy to install using a top-side design.  

 

 

Drastically reduce your Harley's motor oscillation with the installation of the Harley-Davidson frame stabilizer from Riders Discount.  For any questions, give us a call or send us an email and we'll gladly help you out. 

 

Edited July 17, 2015 by RidersDiscount

[RidersDiscount]

This OE style Harley-Davidson oil tank is available from Riders Discount today!  

 

 

The Biker's Choice Harley-Davidson Oil Tank is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Plated with a mirror like show-chrome finish, this oil tank is an exact OE replica made to fit the Harley-Davidson Sportsters from 1983-2003.  

 

 

This accepts all the original fittings, including the cap and mount. 

 

 

Order your Biker's Choice Harley-Davidson Oil Tank today from Riders Discount!  If you have any questions, feel free to give us a call or send us an email and we'll gladly help you out.

 

[RidersDiscount]

Made in the USA, these RWD seats are made by Saddlemen and are available from Riders Discount today!

 

 

The Saddlemen RWD Profile seats are available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Made specifically for Harley-Davidson 2008+ FL models equipped with an RWD gas tank, these seats offer premium luxury protection at an affordable cost.  

 

Quality craftsmanship with construction done by Saddlemen, synthetic SaddleHyde leather offers a real leather look with the durability of synthetic materials.  

 

 

SaddleGel is used in the seat pad for a more comfortable ride.  With the SaddleGel, you'll be able to go riding all day long without getting sore. 

 

 

Available from Riders Discount today, contact us if you have any more questions or would like to place an order for these Saddlemen RWD Seats. 

 

[RidersDiscount]

Boost any 883cc Harley-Davidson Sportster to a 1200cc with the installation of this S&S Cylinder and Piston Conversion Kit available from Riders Discount. 

 

 

The S&S Cylinder and Piston Conversion Kit is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Able to fit into any 1986-2013 883 Sportster, this is ready to assembly right out of the box without any additional machining or balancing.  

 

 

This is as bolt on as you can get to bump up your engine to a 1200cc, S&S has done all the hard work for you.  These pistons weigh the same as your 883 so there is no need to rebalance your flywheels.  

 

 

Best of all, this can still do handle all the day-to-day stresses of a street bike.   S&S keeps the compression at 9.4:1 so you can still ride this everyday on the street.  The only difference is now it's a bit more fun!

 

 

Available in silver powder coat or black wrinkle powder coat as shown here. 

 

 

 

Order your S&S Cylinder and Piston conversion kit today from Riders Discount.  If you have any questions or need help placing your order, give us a call or send us a message and we'll gladly help you out!

[RidersDiscount]

Machined from 9/16" square steel bar, the Cycle Visions Multitude sissy bar is available from Riders Discount in chrome or black in 18" or 30" heights. 

 

30" height shown here.

 

The Cycle Visions Multitude sissy bar is available to purchase through our website.  If you need help placing your order, or have any questions about the product, feel free to give MIKE a call at 866.931.6644 ext. 804.  Is email more convenient?  Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

 

Made in the U.S.A., the Multitude sissy bar is powder coated with either a chrome plated mirror-like finish or black.  

 

 

On top is the option to add your choice of Topper knobs (sold separately).  Available options include an 8-ball, eyeball, Cycle Visions logo, skull head, or devils head.  

 

 

This will fit all Cycle Visions side plates except for their plug-n-play.  Side plates are not included. 

 

 

Available today from Riders Discount, give us a call or send us an email if you would like to place an order!

Edited August 18, 2015 by RidersDiscount