Mark1647545493 Posted June 18, 2005 Report Share Posted June 18, 2005 I'm putting a remote start in my 01 Ranger. I got 97% of the wiring done except for the factory arm/disarm wires. Every where I look on the internet it says to look for a dark green/purple stripe wire in a 4 pin pulg thats in the drivers kick panel. I can't find a green/purple stripe wire anywhere around the drivers side of the truck. Has anyone else went thru this? Quote Link to comment Share on other sites More sharing options...
Guest mudbutt Posted June 18, 2005 Report Share Posted June 18, 2005 as long as you do the locks correctly, you shouldnt need this. The main thing to look out for is passkey. Im prettysure an 01 ranger will use it. It requires a loop that goes around the column to simulate the transponder key. It is fun getting the "bulb" in the right location. I did a lincoln LS and a few mis other newer ford cars and trucks this way and never had an issue with the factory alarm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.