fast91stang Posted October 27, 2007 Report Share Posted October 27, 2007 hey i recently put a cam in my mustang, i changed the thermostat when i did this. We cant seem to get it sealed up no matter what we try it leaks. we have changed the gasket a couple times and used gaskey sealeant. any suggestions? this is very frustrating........................ Quote Link to comment Share on other sites More sharing options...
BigHairDryer Posted October 27, 2007 Report Share Posted October 27, 2007 Csr and billet specialties has an oring seal at jegs Quote Link to comment Share on other sites More sharing options...
nurkvinny Posted October 27, 2007 Report Share Posted October 27, 2007 Don't over tighten. If it still leaks, buy a new housing. Quote Link to comment Share on other sites More sharing options...
Clifford Automotive Posted October 27, 2007 Report Share Posted October 27, 2007 There is no reason if your letting a good sealent setup it should be leaking. How long did you wait on the setup time before starting. Quote Link to comment Share on other sites More sharing options...
BigHairDryer Posted October 27, 2007 Report Share Posted October 27, 2007 Unless its a ford racing housing then grind the chrome plate off the gasket side Quote Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted October 27, 2007 Report Share Posted October 27, 2007 Unless its a ford racing housing then grind the chrome plate off the gasket side +1 or make sure that bolt on the bottom that is almost behind the water pump is all the way tight... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.