Jump to content

1992 Acura Integra GSR F/S


1qwk767

Recommended Posts

Posting this up for a friend of mine, car is very very clean and well taken care of.

 

I just copied and pasted the ad from craigslist of the info link with pics included at the bottom

 

Up for sale is my 1992 Acura Integra GSR. It has 166k miles on the chassis, roughly 55-60k on the motor. Long, long list of mods, most drivetrain components, and all motor accessories have lbeen replaced in the last 3k miles.

 

B16a w/gsr cams

Skunk 2 adj. cam gears

Stock intake arm/box w/new k&n air filter

Ceramic 2 piece header w/ 2.5 in collector

Custom 2.5 Exhaust w/ 2 resonators, borla muffler, greddy tip

64mm bored Thorttle body

omni power 'SPORT' full coilovers 12k/10k

Legend dual piston calipers

11.1" front rotors redrilled to 4x100

oem stanley sidemarkers

1 pc headlights

ek sideskirts

momo race wheel

NGALLS Camber Kit

progress 19mm rear sway bar

23mm trunk bar

trunk bar

rear strut bar

c-pillar bar

rear tie bar

minor wire tuck, and clean up

tons, tons, tons of new parts as of 5/2008

new honda oem clutch kit

new honda oem starter

new distributor

new battery

new alternator(as well as another good spare)

new alternator belt

hondata intake manifold gasket

felpro exhaust manifold gasket

2 new oem axles and halfshaft

new oem front crossmember w/ new radius rod bushings

 

new Dunlop Direzza Tires

new shift linkage w/ aftermarket bushings

Iridium plugs, NGK wires, oil change within last 200 miles

 

The mod list and pictures really speak for themselves. Virtually everything on the car is new. I have replaced the worn front seats with original MINT condition stock DB2 seats. Uber rare to have these seats in good condition. Most are ripped apart or covered in stains.

 

This car has never let me down, its a blast to drive. I hate to see it go, but it needs to move on to someone who can really enjoy it. Please look at the parts list. these aren't ebay garbage parts. It has a low mileage JDM motor, and 1,000+ suspension setup.

 

$3500 OBO/trade

 

here is the ad http://columbus.craigslist.org/cto/923377871.html

Link to comment
Share on other sites

[edit] B16A

 

Note: All JDM B16A engines are stamped 'B16A' (with no number after the "A" to identify version).

 

  • VTEC
  • Found in:
    • 1988-1991 JDM Honda Integra RSi/XSi (DA6/DA8)
    • 1988-1991 JDM Honda CRX SiR (EF8)
    • 1988-1991 JDM Honda Civic SiR (EF9)
      • Displacement: 1,595 cc (97.3 cu in)
      • Compression: 10.2:1
      • Rod/stroke ratio: 1.74
      • Power: 158 hp (118 kW) @ 7600 rpm & 111 ft·lbf (150 N·m) @ 7000 rpm
      • Transmission: S1/J1/Y1/YS1
      • Redline: 8200 rpm

Link to comment
Share on other sites

[edit] B16A

 

Note: All JDM B16A engines are stamped 'B16A' (with no number after the "A" to identify version).

 

  • VTEC
  • Found in:
    • 1988-1991 JDM Honda Integra RSi/XSi (DA6/DA8)
    • 1988-1991 JDM Honda CRX SiR (EF8)
    • 1988-1991 JDM Honda Civic SiR (EF9)
      • Displacement: 1,595 cc (97.3 cu in)
      • Compression: 10.2:1
      • Rod/stroke ratio: 1.74
      • Power: 158 hp (118 kW) @ 7600 rpm & 111 ft·lbf (150 N·m) @ 7000 rpm
      • Transmission: S1/J1/Y1/YS1
      • Redline: 8200 rpm

 

 

ok so no internal work

Link to comment
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...