Qtr_pndr Posted March 20, 2009 Report Share Posted March 20, 2009 good deal on another forum This car is not 100% ready for the street. It needs a different chip or standalone. I wouldn't drive it very far or long since I don't know what the air/fuel ratio is. I figured I would put this on here to see if any one would be interested. Everything below tells the about the car. I am pretty sure that is everyting. I will be parting it out shortly because I told my grandpa I would get it out by spring. So if it doesn't sell in a couple of weeks then it is getting parted out. $2000 or maybe some trading. I am looking for longtube headers, x pipe, "built" trans, alum. heads and anything really. Just tell me what you got. The motor: je pistons 8.5:1 block got decked a little bit aligned bored .010"(if i remember right) crank got turned .010" two new rods and the other two checked ARP rod bolts ARP head studs new oil pump every gasket replaced all new bearings cyl. head was previously ported I had some bowl work done on the head stainless steel valves all new guides and seals I can't confirm, but supposed to be autotech 260 cams TTTuning cam gear head got shaved twice comp. ratio should be around 9:1 metal head gasket new water pump USRT intake manifold digi 1 throttle bodie Old EIP tuning cast exhaust manifold not externally gated new exhaust mani. studs and nuts new t3/to4e 57mm .63 a/r internally gated turbo ATP iternal gate to 3" v-band housing 3" stainless steel, mandrel bent, borla xr1 race muffler exhaust 2.5" intercooler piping mild steel, mandrel bent, powder coated rough black spearco intercooler Spec stg.3 clutch and pp 8lb. flywheel( If i remember right) rear mount battery new belts rebuilt shifter box and linkage HKS electric boost controller(old one, but works well) BBM solid front mount, vr6 trans mount (?)and a stiffer rear mount. Apexi blow off valve Runs on digi 1 with a stg.4 tttuning chip, closed looped, aeromotive fuel pressure regulator, and 42lbs. injectors The car is running super rich right now. The car: 1987 gti g60 flares bilsteins in front and kyb's in the back with neuspeed springs all around corrado seats black with red pinstrip door cards Westy front end The bad: 020 trans with no lsd. The actual car it self isn't the best either. Has different colored fenders and it was repaint a purple maroon color. It was going to work for me for what i wanted though so it didn't bother me a whole lot. Shock tower has been repaired. Headliner sucks. Brakes will probably need done. Even though i did them when i bought the car the got a little rusty and such. Needs tires. Windsheild is cracked. The interior needs a little help with the gauges and such. The engine wiring is just a little bit messy. Not bad, just needs a little more attention. I have some more pics. if you guys want to see them. Just let me know. http://i4.photobucket.com/albums/y106/evildriver/campcar002-1.jpg http://i4.photobucket.com/albums/y106/evildriver/campcar006.jpg http://i4.photobucket.com/albums/y106/evildriver/campcar005.jpg http://i4.photobucket.com/albums/y106/evildriver/scan0006.jpg Quote Link to comment Share on other sites More sharing options...
Aesthetic_Influx Posted March 20, 2009 Report Share Posted March 20, 2009 Have to register to view. Quote Link to comment Share on other sites More sharing options...
Qtr_pndr Posted March 20, 2009 Author Report Share Posted March 20, 2009 fixed Quote Link to comment Share on other sites More sharing options...
zeitgeist57 Posted March 20, 2009 Report Share Posted March 20, 2009 Looks decent. I like it! I think that engine will blow the tranny in a heartbeat, but that optimistic viewpoint is shared by the seller...hence the price of the car... Quote Link to comment Share on other sites More sharing options...
Aesthetic_Influx Posted March 20, 2009 Report Share Posted March 20, 2009 Could be a hell of a fun AutoX car. Quote Link to comment Share on other sites More sharing options...
Farkas Posted March 20, 2009 Report Share Posted March 20, 2009 I wouldn't touch it. Quote Link to comment Share on other sites More sharing options...
neonkiller Posted March 20, 2009 Report Share Posted March 20, 2009 I wouldn't touch it. running away now Quote Link to comment Share on other sites More sharing options...
iwashmycar Posted March 20, 2009 Report Share Posted March 20, 2009 no rust hood no care Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.