Jump to content

2001 Pontiac GTP Dyno Tune


DTM Brian

Recommended Posts

Was it the MAF calibration ?

 

KR?

 

Yeah, I'm assuming the baseline lean spike was caused by KR. Typical for cars with a 3.4 pulley and still on a factory tune, or a lot of times even on stock pullied cars (but to a lesser extent). On WOT runs, as the RPM's climb, the stock PCM may pull a shitload of timing, which appears to be the case in this instance. I could be wrong though

 

I don't see how pulling timing would make it go lean. If my WRX pulls timing it make it a tad rich for a second but settles back

 

I'm not sure as I would expect if your pulling timing there is already a predet situation. Taking fuel away from that would not make sense. What ever it is Brian made that guys care safer and more power.

 

 

There was about 13% adjustment in the maf needed accross the whole table. I believe this had something to do with the cold air intake on the car. The fuel delivery issue on the first pull was due to a weak fuel pump. I took the customer to get a GTP specific fuel pump after watching the fuel pressure drop on the first pull.

 

Here is what the customer had to say about his experience at Dyno Tune

 

First off big thanks to brian for the deal on the tune, it was awesome and im very pleased and after figuring out i had a shot fuel pump we got the car dialed in pretty good, and it moves plus i got 30mpg on the highway on the way back from the shop to cincy

 

i would recommend dyno tune motorsports to anyone, grand prix or not ill definitely be back for the tune and that delicious pizza

Link to comment
Share on other sites

hmmm that makes me curious as to what mine would run? i have a ZZp 2.5" DP, custom catback/flowmasters, CAI, 3.4 pulley, intense PCM and some minor little shit

 

maybe you can tinker with my tune a little brian? i wanna get my tranny flushed and add a shift kit/new filter first though.

 

Well with a CAI, 3.4 pulley, T-stat, coledr plugs and Dyno Tune from Brian my GTP ran 13.7 @ 99 mph. With 1.9 rockers and a 3" exhaust it went 13.4 @ 103 mph. All on pump gas and street tires with minor weight reduction ( No spare tire, floor mats... etc) I had good 60fts though 1.8's and 1.9's. Good for a FWD with stock suspension that is.

Link to comment
Share on other sites

Well with a CAI, 3.4 pulley, T-stat, coledr plugs and Dyno Tune from Brian my GTP ran 13.7 @ 99 mph. With 1.9 rockers and a 3" exhaust it went 13.4 @ 103 mph. All on pump gas and street tires with minor weight reduction ( No spare tire, floor mats... etc) I had good 60fts though 1.8's and 1.9's. Good for a FWD with stock suspension that is.

 

damn...i have all that now plus the exhaust and then the shift kit going in. look like ill need him to tune it for me :D will prob do rockers and then im done with the car other than maybe headers?

Link to comment
Share on other sites

There was about 13% adjustment in the maf needed accross the whole table. I believe this had something to do with the cold air intake on the car. The fuel delivery issue on the first pull was due to a weak fuel pump. I took the customer to get a GTP specific fuel pump after watching the fuel pressure drop on the first pull.

 

Here is what the customer had to say about his experience at Dyno Tune

 

First off big thanks to brian for the deal on the tune, it was awesome and im very pleased and after figuring out i had a shot fuel pump we got the car dialed in pretty good, and it moves plus i got 30mpg on the highway on the way back from the shop to cincy

 

i would recommend dyno tune motorsports to anyone, grand prix or not ill definitely be back for the tune and that delicious pizza

 

Pizza? All of the times that we have been over there and we don't get pizza? ;)

Link to comment
Share on other sites

There was about 13% adjustment in the maf needed accross the whole table. I believe this had something to do with the cold air intake on the car. The fuel delivery issue on the first pull was due to a weak fuel pump. I took the customer to get a GTP specific fuel pump after watching the fuel pressure drop on the first pull.

 

Here is what the customer had to say about his experience at Dyno Tune

 

 

 

Pizza? All of the times that we have been over there and we don't get pizza? ;)

 

 

Lets make it happen Captain. :)

Link to comment
Share on other sites

Nice work Brian :) . Thats really some nice numbers.

 

I'm working on my MAF recalibration right now. It's an art.

 

More of a science, as in third degree polynomial...

 

This was a very crude scatterplot (no filtering) of laminar flow test across an LS6 MAF, notice the trend line...

 

http://img26.imageshack.us/img26/3100/rawmafdata.gif

Link to comment
Share on other sites

damn...i have all that now plus the exhaust and then the shift kit going in. look like ill need him to tune it for me :Dwill prob do rockers and then im done with the car other than maybe headers?

 

That's all I would do. If I had to do it all over again, I don't think i would have gone past that. The cars was fun to drive and reliable. After the 300 WHP mark things went down hill fast. :(

Link to comment
Share on other sites

Well with a CAI, 3.4 pulley, T-stat, coledr plugs and Dyno Tune from Brian my GTP ran 13.7 @ 99 mph. With 1.9 rockers and a 3" exhaust it went 13.4 @ 103 mph. All on pump gas and street tires with minor weight reduction ( No spare tire, floor mats... etc) I had good 60fts though 1.8's and 1.9's. Good for a FWD with stock suspension that is.

 

Thats some damn good times. I guess its true. Its all in the tune...

Link to comment
Share on other sites

Hey brian you think you can get a base tune together to start my car so we can get it on the dyno to tune it?

 

3800sc series 2

2.8 pulley

stg 3 ported blower

ported lower

ls1 maf

n* tb

intercooler

slp headers

xp cam

 

What PCM are you running in your car?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...