Jump to content

32.7 MPG + 405hp = WIN


HAOLE

Recommended Posts

I took a trip to Baltimore this weekend in the Z06. I have to say I am really impressed with the MPG. 32.7! The 32.7 was on flat roads in the mountains I got 27.8 MPG.

 

Why drive a Honda Civic and get the same MPG?

 

http://i84.photobucket.com/albums/k25/straightchiro/Mobile%20Uploads/IMG00585.jpg?t=1256578855

Link to comment
Share on other sites

Busted.

 

nothing busted at all..... the car says what it says. I have checked it in the past and it is close, not perfect, but close. Even if you calculate from this fill receipts you are still not accurate because the pumps do not fill to the same level each time.

Link to comment
Share on other sites

nothing busted at all..... the car says what it says. I have checked it in the past and it is close, not perfect, but close. Even if you calculate from this fill receipts you are still not accurate because the pumps do not fill to the same level each time.

 

Couldn't you go off of the the amount of gallons put in, and how many miles you drive on each fill up?

Link to comment
Share on other sites

I beleive it, my C5 has got 32-33mpg at 65-70mph numerous times, 80mph cruise it will get about 26-28. That is calculating it per gallons used/miles driven. Not just using the cars computer...although they are really close. Mine makes about 400whp too. It's all in the tune. My CTS only does about 24highway. I calculate every tank because I am a nerd like that.
Link to comment
Share on other sites

The cars computer should be pretty accurate because it knows exaclty how much fuel has been injected...unless you did some tuning on teh ECU and numbers are fudged.

 

I've had seeral friends with F-bodys and Vette's that have seen the same results.

 

p.s. Pushrods suck

Link to comment
Share on other sites

The cars computer should be pretty accurate because it knows exaclty how much fuel has been injected...unless you did some tuning on teh ECU and numbers are fudged.

 

I've had seeral friends with F-bodys and Vette's that have seen the same results.

 

p.s. Pushrods suck

 

100% stock

Link to comment
Share on other sites

Nice! Just about 1-2mpg better than the 2.3t in the MS3. Downside for my car is 6th still revs too high IMO. 72mph at 2,800rpm. I suppose the upside is I can still pull pretty hard without shifting. However, I'd rather have it loaf along at 2k or so, but I'm no engineer and perhaps doing so would be hard on the motor if it began to go up a steep incline while in such a gear.
Link to comment
Share on other sites

i get 28 mixed in my 4cylinder...it makes 200hp less than that also...

 

im jealous!

 

 

curious, what kind of mileage do you get mixed?

 

Around 17-18. Can be lower depending on how much my right foot is on the floor.

Link to comment
Share on other sites

Nice! Just about 1-2mpg better than the 2.3t in the MS3. Downside for my car is 6th still revs too high IMO. 72mph at 2,800rpm. I suppose the upside is I can still pull pretty hard without shifting. However, I'd rather have it loaf along at 2k or so, but I'm no engineer and perhaps doing so would be hard on the motor if it began to go up a steep incline while in such a gear.

 

I think I am about 1600 @ 65mph and 1900 @ 80mph. I still pull up the mountains with no downshift. TQ FTW

Link to comment
Share on other sites

I think I am about 1600 @ 65mph and 1900 @ 80mph. I still pull up the mountains with no downshift. TQ FTW

 

That would be nice to cruise with lower RPMS. Instead they give the MS3 280ft lbs at 3000rpm and keep it cruising close enough to it to make it available upon request.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...