Jump to content

took off m112.. WONT START NOW?!!?


Guest JCroz91

Recommended Posts

Guest JCroz91
got it all back to stock today. tried to crank it over and it just tries and dies. i figuared maybe there wasnt any gas in the fuel rail so i let it prime for a few sec and still nothing. so i call my dad and look at then engine a little to make sure all spark plugs and vac lines are connected and they were. i try again and it fires up. and then just dies. smells like gas. prob from it being fludded. but im not sure. any ideas?
Link to comment
Share on other sites

Guest Removed
think it could possibly be that my injectors are bad? i still have the 310LPH pump pumping into my stock injectors. but i couldnt see that being a problem

no. are they old injectors that have been laying around?

Link to comment
Share on other sites

Guest Removed
i am selling it.

 

and they were the stock injectors. i took them off a year ago and they have just sat in my room.

so they sat in your room and collected dust and lord know what else...

 

 

see where im going with this

Link to comment
Share on other sites

Guest JCroz91
so i should prob change injectors? cause thats what my dad said. it sounds like its not getting fuel. would that throw a code? im going to check codes tonight. would injector cleaner help?
Link to comment
Share on other sites

Guest JCroz91
if it dont run, it wont throw codes unless it see's something really wrong(like a bad sensor, or something unplugged)

 

yes, injectors are dirty

 

my guages are acting goofy too. like only working 1/2 the time. and when i first start it the speedo goes through the full sweep.

Link to comment
Share on other sites

Guest JCroz91

just pulled the codes.. theres 4

 

p1401

p1409

p1131- pending

p1151- Pending

 

seems like its all o2 sensor and EGR stuff? prob cause i have no cats and EGR delete

Edited by JCroz91
Link to comment
Share on other sites

Guest Removed
just pulled the codes.. theres 4

 

p1401 dpfe(egr flow sensor)

p1409 egr code for vacuum source(maybe back wards on the lines)

p1131- pending 02 code

p1151- Pending 02 sensor code again(are they plugged in)

 

 

sounds like you dont have something right

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...