russian rocket Posted September 26, 2010 Report Share Posted September 26, 2010 (edited) Up for sale i have an lq9 short block, mileage is around 60k SOLD Tea (Total Engine Airflow) 5.3l stg 3 heads here are the details from their site Package includes: Full CNC poring of Intake,exhaust and Combustion chamber to 225 cc intake runner volume, competiton multi angle valve job, installation of larger intake and exhaust seats,with hand finishing. Built on brand new 5.3 castings (included in price) Ferrea 2.055 intake valves, Rev 1.57 exhaust valves 63cc Combustion Chamber (can be milled smaller) Asssembled with dual gold .650" lift hydraulic roller springs, titanium retainers,and gm seals. Flow sheet with intake and exhaust included. This head is designed for use on 3.900" bore motors and flows great. It WILL require flycutting of pistons for valve reliefs with camshafts over 226*@.050". Will make best power with a lsx 90 intake and 1 3/4" or larger headers. We have customer's who have made well over 450RWHP using this head on stock 5.7's! and the flow numbers are Flow Data LS1 5.3 Stage 3 Lift Intake Exhaust .100" 67.4 55.1 .200" 143.2 115.3 .300" 211.3 157 .400" 257.3 200.6 .500" 299.1 255.7 .550" 315.2 268.3 .600" 326.5 276 .650" 328.3 the heads have recently been milled so the chambers should be about 59cc-60cc asking 1500 if i deliver or 1400 if you pick up will sell as a long block for 2000 if i deliver or 1900 if you pick it up http://i22.photobucket.com/albums/b331/kliped/1af743ce.jpg email me at borisxo@hotmail.com or call/txt me at 248-219-8783 Edited October 19, 2010 by russian rocket Link to comment Share on other sites More sharing options...
russian rocket Posted October 6, 2010 Author Report Share Posted October 6, 2010 back up Link to comment Share on other sites More sharing options...
MrMeanGreen Posted October 6, 2010 Report Share Posted October 6, 2010 Does the front of the block have the provisional holes added for the F-Body accessories? Link to comment Share on other sites More sharing options...
russian rocket Posted October 6, 2010 Author Report Share Posted October 6, 2010 Does the front of the block have the provisional holes added for the F-Body accessories? hmm.... idk, how do i tell? Link to comment Share on other sites More sharing options...
MrMeanGreen Posted October 7, 2010 Report Share Posted October 7, 2010 Can you get me a pic of the front of the block? I can tell from that. Link to comment Share on other sites More sharing options...
Chadz89GTA Posted October 7, 2010 Report Share Posted October 7, 2010 Can you get me a pic of the front of the block? I can tell from that. Shouldn't matter, just put a 5.3L in mine and all we had to do was drill and tap holes, but we didn't figure out til after the block was in Block out only take 10mins tops. Edit: The only holes it wno't have Anthony are the holes for the A/C bracket. Link to comment Share on other sites More sharing options...
Billiumss Posted October 7, 2010 Report Share Posted October 7, 2010 Does the front of the block have the provisional holes added for the F-Body accessories? Doesn't look like it... Link to comment Share on other sites More sharing options...
Cordell Posted October 7, 2010 Report Share Posted October 7, 2010 Shouldn't matter, just put a 5.3L in mine and all we had to do was drill and tap holes, but we didn't figure out til after the block was in Block out only take 10mins tops. Edit: The only holes it wno't have Anthony are the holes for the A/C bracket. I put the LQ4 in my car and had to drill and tap 2 holes for the alt bracket. Everything else was there, LQ4/LQ9 is the same block, however I'm not sure the alternater holes are a problem on all years. My A/C bracket bolted right on. Link to comment Share on other sites More sharing options...
Cordell Posted October 7, 2010 Report Share Posted October 7, 2010 Doesn't look like it... How can you tell from that picture? In all seriousness I can't, but it looks like the holes for the A/C are there. Link to comment Share on other sites More sharing options...
russian rocket Posted October 19, 2010 Author Report Share Posted October 19, 2010 bump, someone make me a good offer on the heads Link to comment Share on other sites More sharing options...
russian rocket Posted October 25, 2010 Author Report Share Posted October 25, 2010 bump for some badass heads Link to comment Share on other sites More sharing options...
Recommended Posts