Tripleskate Posted March 19, 2011 Report Share Posted March 19, 2011 I've been trying to install a CP-e Standback EMS to the car for the past two weeks. Their included instructions are poorly done, and in some cases wrong, and they won't give me their full pinouts since they are an "industry secret" (bullshit). So I'm stuck with a $500 paperweight. Anyway, it would be an immense help if anyone who has access to AllData or something similar could post up ECU pinouts for a 2008 Mazda3 2.3L 5MT. Thanks. Quote Link to comment Share on other sites More sharing options...
99FLHRCI Posted March 19, 2011 Report Share Posted March 19, 2011 With or without California Emissions? With LF ATX? With LF MTX and L3? Sorry but there are 3 different pinouts. Good news is I can tell you what every pin is, where it goes, what signal it is and what voltage should be on that line. PM me or I may forget to check this again. Quote Link to comment Share on other sites More sharing options...
Tripleskate Posted March 19, 2011 Author Report Share Posted March 19, 2011 With or without California Emissions? With LF ATX? With LF MTX and L3? Sorry but there are 3 different pinouts. Good news is I can tell you what every pin is, where it goes, what signal it is and what voltage should be on that line. PM me or I may forget to check this again. <3 PM sent Non-Cali spec, LF MTX and L3 Quote Link to comment Share on other sites More sharing options...
99FLHRCI Posted March 20, 2011 Report Share Posted March 20, 2011 All from AllData. Use at your own risk. If you need anything else or I missed something let me know. Except for California emission regulation applicable model with LF MTX and L3 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179459 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179460 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179461 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179462 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179463 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179464 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179465 http://alldatapro.com/alldata/PRO~V210245463~C44968~R0~OB0~P4R0H~N/0/128809663/133146528/133146529/133146533/34853741/34857029/34857030/101367125/34857306/135179440/135179466 NOTE: The PCM terminal voltage can vary with the conditions when measuring and changes due to aged deterioration on the vehicle, causing false diagnosis. Therefore determine comprehensively where the malfunction occurs among the input systems, output systems, and the PCM. Quote Link to comment Share on other sites More sharing options...
Tripleskate Posted March 20, 2011 Author Report Share Posted March 20, 2011 Did you link directly from AllData? Because everytime you reload the page, the images change. :/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.