Jump to content

Finally selling the TA


V8 Beast

Recommended Posts

2001 a Trans Am WS6 for sale. I was the second owner when I purchased it in 2002 with 10k miles on it. Car has just over 36k miles to date. As with most 10 year old cars it has a few scratches, but nothing major.

Here is the complete mod list

 

WS6 Store

Clear air lid

SLP Strut tower Brace

Hypertech 180 degree thermostat

QTP Electronic Cutout

QTP Long Tube Headers

24" Oxygen Sensor Extensions

12" Oxygen Sensor Extensions

Fast/Nick Williams 90mm combo

KYB Adjustable AGX Front Shocks

KYB Adjustable AGX Rear Shocks

Brembo Front Slotted Rotors

Brembo Rear Slotted Rotors

Comp Cams RPM Valve upgrade kit - push rods, springs, retainers

Casper O2 Sensor Simulators

UMI performance Lower control arms & panhard bar single adjustable

Lower control arm relocation

Patriot Gold dual valve springs

233/239 112LSA camshaft

SLP Heavy Duty Oil Pump/Timing Chain Package

Spohn Drive Shaft Safety Loop

Racetronix fuel pump

Custom return fuel system

 

Jegs

Flowmaster “American Thunder Cat-Back” 3inlet 3 outlet 80 series

Eibach Pro Kit Springs (front only)

BMR Super transmission cooler

AFR 205cc Heads 66cc combustion chambers 85cc exhaust ports

Mickey Thompson ET Street 275/40-17

Nitrous Activation Switch

Holley Fuel Pump Safety Switch

Mickey Thompson ET Drag Tire 26x10-15

Nos Digital Progressive Controller

Triple Guage Pod housing

N2O bottle pressure gauge,

A/F wideband sensor,

Fuel pressure gauge

Jegs Star front runners

 

Billingsley Racing

Reluctor Rings (4 Channel)

Aluminum Support Cover

Super Strength Posi Unit (4 Channel)

Backing Plates (4 Channel)

Strange 12-Bolt RearEnd Assembly (wheen sensor has been recently removed)

33 Spline Axles

note: abs sensor has been removed

 

Lasota Racing

Custom 3'' y-pipe made by Rob Lasota

 

Nitro Daves Nitrous Outlet

2' 3an-4an blue sho hose (to handle up to a 250 shot)

Stand Alone Fuel System

purge kit, routed to spray from the ram air nostrils.

 

Rossler Transmission's

Terminator 3 transmission rebuild with deeper tranny pan and Trans brake.

 

Summit Racing

#42 SVO Fuel Injectors

 

Umi Performance

3-Point Subframe Connectors

Full Length Chrome Moly Adjustable Torque Arm

Torque Arm Relocation Kit

 

Ls1tech

NX wet kit with extras - (window switch/3000-7000 pills/bottle heater/switch panel/billet bottle holder/wot switch)

Wolfe 5 point roll bar

Suspension Air bags in the rear

 

Yank Performance

Yank 3600 Stall

 

Other

15lbs bottle

Bottle heater

 

Car made 550rwhp and 630ft-lbs on a rich 150 shot last trip to the dyno on the progressive controller (444rwhp/417rwtq on motor). Stand alone fuel system and digital progressive timer gives an option to spray more, but I never really saw a need to do it. Best 1/4 mile to date was a 10.72 @ 128 on the street setup. With slicks, front runners, and not babying the car it could see 10.4's.

 

http://i70.photobucket.com/albums/i89/xxtheonlyxx/TransAm038.jpg

 

$16,750

Edited by V8 Beast
Link to comment
Share on other sites

This last track day reminded me that Ive out grown this car. It was an impulse buy at 22 years old thay I only kept around because of past memories. Someone who will use it more than to drive to work 2 days a week should have it.
Link to comment
Share on other sites

Well yes I had to post it, damn Brian why?

 

Even as nice as the car is you'll have a hard time getting that out of it, but I really hope you do. Let me know if you start taking nitrous stuff off.

 

This would be a great car for someone, it really is put together well.

Link to comment
Share on other sites

Well yes I had to post it, damn Brian why?

 

Even as nice as the car is you'll have a hard time getting that out of it, but I really hope you do. Let me know if you start taking nitrous stuff off.

 

This would be a great car for someone, it really is put together well.

 

I know, the 17,950 is the lazy price :lolguy: I'm hoping to find someone that needs the stuff but if not I can sell them seperate.

 

Edit: More detail on why I chose the above price.

 

The private party value is around $14-$15k. I can sell the drag wheels seprately for $800 and the nitrous parts for $1200. A dealership could sell them a stock one with 36k miles for $15k... or they could get a 36k mile car with $20k (in top dollar mods) for $15,950 and pay an extra $2000 for the drag package :fuckyeah:

Edited by V8 Beast
Link to comment
Share on other sites

Thanks everyone

 

GLWS Sad to see but I am sure you will get something very nice to take its place.

Dont forget the Spohn 1" rear sway bar

 

I totally forgot you put that on with the air bags and roll cage. Thank you sir.

 

 

Wagner... You have a pm

Link to comment
Share on other sites

I understand about out growing.. I haven't started mine in almost 3 years but I don't want to live in regret if I sell it... At least mine is paid off...

 

Glws!

 

This is where i'm at with mine. EVERYONE that has sold theirs told me to keep it, i'd regret it later. I'm fighting the urge to list mine, but I know i'd never get what I want out of it so I don't bother.

Link to comment
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...