Jump to content

Bedliner DIY Kits


Ef8sirJunkie

Recommended Posts

The roll on stuff sucks.. Personal experience.

 

I scuffed the inside of my dodge ram bed (Paint was perfect). I used the kevlar roll on stuff. It sucked. I probably had 8 hours in rolling the inside of my bed. Did 3 coats. Let it dry for a good week. Looked like shit and didnt work worth shit.

 

First time I loaded my quad in the bed the rams took the stuff right off.

 

Ever since then I tell everyone to just spend the monday and get it done right.

 

 

 

 

I HAVEEEE read about a cheaper spray product... You can get from shermain williams I think. 2 part mix and you have to get a harbor freight gun that can spray thick stuff. Looks like Rhino liner, not linex and holds up pretty god.

Link to comment
Share on other sites

I ran across a thread on the XTerra board and this Monstaliner stuff looks pretty cool

 

Dude did his whole Xterra in it

 

http://i658.photobucket.com/albums/uu305/stevencox93/aa95ebf9.jpg

 

http://www.clubxterra.org/forums/showthread.php?t=37654&highlight=bedliner+spray&page=2

Link to comment
Share on other sites

I used the roll on Herculiner for my rocker panels and lower doors and frame. I'm pleased with it but not sure how well it actually works on a bed.

 

I can attest to this, the Herculiner is holding up really well on his truck and its been on there for a few years.

Link to comment
Share on other sites

I can attest to this, the Herculiner is holding up really well on his truck and its been on there for a few years.

 

I was looking at the herculiner. Starkmaster you havent seen much chipping or crumbling?

 

Im looking to get away with a budget of $200-$250. My cab is rusted bad on the bottom as i seen a lot of these silverados do but im looking into replacement panels and install before doing the sides of the truck.

 

ill look into the monsterliner some more also. But i would like someone first hand experience with it.

Link to comment
Share on other sites

I was looking at the herculiner. Starkmaster you havent seen much chipping or crumbling?

 

Im looking to get away with a budget of $200-$250. My cab is rusted bad on the bottom as i seen a lot of these silverados do but im looking into replacement panels and install before doing the sides of the truck.

 

ill look into the monsterliner some more also. But i would like someone first hand experience with it.

 

The only thing that I've had an issue with was the plastic lower front gray bumper. I covered it as well and it is slowly coming off of the plastic everything else still looks good. I actually need to pick some more up to finish the frame but have been procrastinating on that.

Link to comment
Share on other sites

I have ordered alot of U-pol raptor brand bedliner. 2 part spray in. With the right prep it should last forever. Any O'Reilly auto parts should be able to order it. Or paint supplier.

 

That sounds like what I was thinking of. Raptor.

 

I do use the canned spray liner on my car frames/ rear ends. Works good for that.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...