mrbret Posted October 9, 2007 Report Share Posted October 9, 2007 Two questions here:1) Can you modify the gear shifter on a Z1000 to make it about an inch shorter or are there any other bikes that have shorter shiters that would fit it?2) Same as above but in reverse for a 250 Ninja. Longer shifter needed Quote Link to comment Share on other sites More sharing options...
XB12Ss Posted October 9, 2007 Report Share Posted October 9, 2007 I assume you are talking about length as in distance from the peg? Quote Link to comment Share on other sites More sharing options...
mrbret Posted October 9, 2007 Author Report Share Posted October 9, 2007 Yep, on mine I need it closer & same on the 250 but the 250 one is mounted different so that need to be londer to make the distance less Quote Link to comment Share on other sites More sharing options...
Moto-Brian Posted October 9, 2007 Report Share Posted October 9, 2007 Nothing I know of, but you COULD take a stock peg, cut it short and drill a hole in the end. Next, take a peg piece from either the stock unit or similar and run a bolt through it and attach it to the shorter shaft piece.It would look fine and outside the nut on the inner side, not really noticeable...b Quote Link to comment Share on other sites More sharing options...
mrbret Posted October 9, 2007 Author Report Share Posted October 9, 2007 I had thought about something like that for mine. Quote Link to comment Share on other sites More sharing options...
RR_MIKE Posted October 11, 2007 Report Share Posted October 11, 2007 just wear shoes 3 sizes too big hahahahahahahahaha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.