Jump to content

Gear shifter modification


mrbret

Recommended Posts

Two questions here:

1) Can you modify the gear shifter on a Z1000 to make it about an inch shorter or are there any other bikes that have shorter shiters that would fit it?

2) Same as above but in reverse for a 250 Ninja. Longer shifter needed

Link to comment
Share on other sites

Nothing I know of, but you COULD take a stock peg, cut it short and drill a hole in the end. Next, take a peg piece from either the stock unit or similar and run a bolt through it and attach it to the shorter shaft piece.

It would look fine and outside the nut on the inner side, not really noticeable...b

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...