clutchdrop87 Posted April 24, 2010 Report Share Posted April 24, 2010 I have a 2007 Suzuki Bandit 1250S that I would like to lower the totally upright riding position for a slightly more aggressive riding position. (maybe an inch or two). I looked online for some forums that might discuss this but no luck. Just wondered if anyone else has had this idea? I find that in half a but cheeck leans I feel slightly out of position with the high handlebars. I know this is mostly a touring bike but with a slightly lower position I could have a happy medium. Any ideas or suggestions would be greatly appreaciated. Quote Link to comment Share on other sites More sharing options...
MidgetTodd Posted April 24, 2010 Report Share Posted April 24, 2010 Trade it for a SV Quote Link to comment Share on other sites More sharing options...
Benyen Soljax Posted April 24, 2010 Report Share Posted April 24, 2010 Heli bars usually attach to the top of the triple clamps like dirtbike bars, so if your stockers have a REALLY high rise, that might lower it and still keep a decent touring position. Most people use heli bars to raise their handlebars though. The typical solution for a more aggressive position is aftermarket clip-ons, you would just have to measure the forks to get the sizing right. Quote Link to comment Share on other sites More sharing options...
conn-e-rot Posted April 24, 2010 Report Share Posted April 24, 2010 http://www.spieglerusa.com/ they sell bars might have something to fit your needs Quote Link to comment Share on other sites More sharing options...
John Posted April 24, 2010 Report Share Posted April 24, 2010 take the stock bars off and flip them over. re-install.voila!or go get some clubmans. Quote Link to comment Share on other sites More sharing options...
NinjaNick Posted April 24, 2010 Report Share Posted April 24, 2010 http://www.spieglerusa.com/ they sell bars might have something to fit your needsNiiiiiiice. I will be making a bar purchase from them. Very nice set for the 14. Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted April 24, 2010 Report Share Posted April 24, 2010 not sure what your bars look like...i had bars that rose up, replaced them with drag bars and it lowered them down Quote Link to comment Share on other sites More sharing options...
conn-e-rot Posted April 24, 2010 Report Share Posted April 24, 2010 Niiiiiiice. I will be making a bar purchase from them. Very nice set for the 14.Those should add some comfort for you. Quote Link to comment Share on other sites More sharing options...
bandit Posted April 28, 2010 Report Share Posted April 28, 2010 Let me know what you come up with. I have a 1250s; it seems like you may have tank clearance issues if you go too low. Good luck. Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted April 28, 2010 Report Share Posted April 28, 2010 Let me know what you come up with. I have a 1250s; it seems like you may have tank clearance issues if you go too low. Good luck.i know thats a problem on vmaxes...i had to tilt mine forward a bit to get them to clear...i have literally 1/4" between my bars and tank at full lock Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.