tyler524 Posted July 20, 2010 Report Share Posted July 20, 2010 (edited) Well I had purchased this a few years ago, I was in the process of building a new motor and redoing the car. I put a spare motor in it after I finished the body work and what would you know, a week later it gets totaled. I never got a chance to install it. I also have a megasquirt that I built including the stimulator board and a usb port add on. Everything tested fine just never got a chance to get it on before the car was totaled. I am willing to deal so make me an offer. I have had all this sitting in a box in the garage and am looking to get rid of it and buy a new body for my motorcycle.NOTE: This is an INCOMPLETE Turbo 'package' for a 2nd Gen 2.0 but definitely a great start for someone looking to boostPackage price = $700obo + shippingThe package includes:JGS Turbo Manifold- JGS Stage 1.4 Turbo Header Kit w/ T25 Turbo Flange- minor surface rust from sitting around- would look excellent with a few coats of high-temp paint- clean welds- Retail = $198 shipped UN-WELDEDGarrett T25 Turbo w/ Wastegate Actuator- 95-99 DSM Eclipse Turbo- Removed from a very low mileage (less than 50k) 97 Eclipse GS-T- excellent condition, spins freely with no shaft play- All NEW gaskets and 'newer' bolts- Includes oil drain flange and gasket- Also includes an Earl's brand fitting for the oil feed line(3) 2.25" Blue Purosil 4-ply Polyester Reinforced Silcone Couplers- Working Pressure = 65 PSI- Burst Pressure = 175 PSI- Temperature Range = up to 350 F- Inner Diameter = 2.25"- Length = 2.75"Fernco TB to MAF Reducer- works well when going from the throttle body intake piping elbow to the MAF.90-94 1g DSM BOV w/ Steel Flange & Gasket- This Blow off valve will hold up to 20PSI, which is more than this turbo is capable of.- Never been crushed2.25" Braid Covered Exhaust Flex Section- great addition to your custom downpipe2.25" 90 degree Aluminized Steel Elbow- just a leftover piece that could be used to help create a custom downpipeNGK 7mm Blue Spark Plug Wires w/ Bosch Charcoal Coil Wire- excellent condition w/ less than 5k miles- NGK-8179- Summit Racing sells them for $57Misc. Vacuum Line and Steel Braided Line-Megasquirt I v2.2 with usb add on & Stiumlator Board v2.2*FMU Does not come with it* Edited July 20, 2010 by tyler524 Added Pics Quote Link to comment Share on other sites More sharing options...
Zach Posted July 20, 2010 Report Share Posted July 20, 2010 all probes are beat to shit. good luck with sale Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 20, 2010 Author Report Share Posted July 20, 2010 **Note** This will also fit on a Mazda Mx6 Quote Link to comment Share on other sites More sharing options...
CattaniAFJ Posted July 20, 2010 Report Share Posted July 20, 2010 Mazdas are also beat to shit. GLWS. Quote Link to comment Share on other sites More sharing options...
MattKatz Posted July 20, 2010 Report Share Posted July 20, 2010 Let me see some pics. Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 20, 2010 Author Report Share Posted July 20, 2010 Pics are up Quote Link to comment Share on other sites More sharing options...
DTM Brian Posted July 20, 2010 Report Share Posted July 20, 2010 Looks like my probe could use some boost. No need for the mega squirt. I have the software to flash the stock ecm. Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 20, 2010 Author Report Share Posted July 20, 2010 Looks like my probe could use some boost. No need for the mega squirt. I have the software to flash the stock ecm.I'm willing to deal and sell without the megasquirt. I posted it on the probe forums too and figured most of the people on there would want it. Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 29, 2010 Author Report Share Posted July 29, 2010 Bump for boost Quote Link to comment Share on other sites More sharing options...
redkow97 Posted July 29, 2010 Report Share Posted July 29, 2010 i'm mostly curious because my first car was a '93 PGT, but what kind of power does a turbo I4 variant put out? if memory serves, the GT made 165hp from its 2.5 liter V6 powerplant. probably around 6k RPM. Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 29, 2010 Author Report Share Posted July 29, 2010 I believe like 120hp Quote Link to comment Share on other sites More sharing options...
Kritz Posted July 29, 2010 Report Share Posted July 29, 2010 Tyler, did you smash your bike up? Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 29, 2010 Author Report Share Posted July 29, 2010 Tyler, did you smash your bike up?No the bike had been laid down when I got it, but it was such a good deal I didn't care. Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted July 29, 2010 Report Share Posted July 29, 2010 (edited) since this thread is about probes...i have some front brake pads for a probe that somebody can have for free if they wanna pick them up...new in the box, i bought them and then sold the car before i got the motivation to install themmy car was a 94, so i guess whatever body style that is (2nd gen?)mine was a 2.0 SE not a gt Edited July 29, 2010 by Steve Butters Quote Link to comment Share on other sites More sharing options...
redkow97 Posted July 29, 2010 Report Share Posted July 29, 2010 '93+ was 2nd gen, but the rims for the 4 cylinder and 6 cylinder are waaaaaaay different. Might have been to fit bigger brakes on the GT. Quote Link to comment Share on other sites More sharing options...
tyler524 Posted July 29, 2010 Author Report Share Posted July 29, 2010 I had gt wheels on mine. Some good ole swirlies Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted July 29, 2010 Report Share Posted July 29, 2010 mine was an SE not a GT Quote Link to comment Share on other sites More sharing options...
Fonzie Posted July 30, 2010 Report Share Posted July 30, 2010 all probes are beat to shit. good luck with saleMazdas are also beat to shit. GLWS. What they saidtttBTW.... When you said "Mega-Squirt", I thought this thread was about me Quote Link to comment Share on other sites More sharing options...
DTM Brian Posted July 30, 2010 Report Share Posted July 30, 2010 i'm mostly curious because my first car was a '93 PGT, but what kind of power does a turbo I4 variant put out? if memory serves, the GT made 165hp from its 2.5 liter V6 powerplant. probably around 6k RPM.100 to the wheels. Quote Link to comment Share on other sites More sharing options...
Josh Brady Posted June 25, 2013 Report Share Posted June 25, 2013 (edited) I have a 2.0 Project car I am working on now. If you willing to negotiate down then we can make a deal. Ronald Brady Aiken SC Bore-Port PolishedForged InternalsCrower RegrindsRedone air suspension all the way aroundValve, Springs, Lifter replacement (NEED TURBO) Edited June 25, 2013 by Josh Brady Quote Link to comment Share on other sites More sharing options...
bowdog Posted June 25, 2013 Report Share Posted June 25, 2013 Quote Link to comment Share on other sites More sharing options...
redkow97 Posted June 25, 2013 Report Share Posted June 25, 2013 doesn't mean it's not still in his garage. I saw a FS thread yesterday that the seller had bumped up a year later... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.