marlboro man Posted October 2, 2011 Report Share Posted October 2, 2011 (edited) hear's what I did after spending $600 on a stripper to get her to go riding then I was broke & had no $ for bike & it needed some trim takes a 1 1/2 hr & what tools you will need 8mm&10mmsocket a 6" extenshon,fillips screwdriver,1/4"&1" drill bit, drill,jig saw,tape to cut a long, Edited October 2, 2011 by marlboro man 1 Quote Link to comment Share on other sites More sharing options...
marlboro man Posted October 2, 2011 Author Report Share Posted October 2, 2011 (edited) start out buy removeing rear light wire plugs under seatthen turn singnals 10mm nuts under fender ,then remove front 1/2"shorter front sister singal spacers from front singal as my front singals where broke by last owner & have flush mount singals now in front by pulling the wire gurter belt back so you can get to screw then put 1/2"shorter sister on back singal hears what thay look the one on the left that I'am fingering is the 1/2" shorter one do not put singals back on yet now remove the reflector use 8mm & 6"ext to remove nut under seat then license plate light/bracket 10mm under fender then remove light from bracket now drill 1/4"license plate holes& 1/4"&1" license plate light holes the stock one on the right will need drilled out biger use it to mark other side left nut hole & center one will be drilled out to 1"& now cut fender to the triming you like with jig saw use tape for a gaid linethen you got you some new trim vs old Edited October 2, 2011 by marlboro man Quote Link to comment Share on other sites More sharing options...
ktmryan53 Posted October 7, 2011 Report Share Posted October 7, 2011 1st sentence is the best part. Quote Link to comment Share on other sites More sharing options...
Beegreenstrings Posted October 7, 2011 Report Share Posted October 7, 2011 Ok nice how to. But there are no pics of the stripper. Quote Link to comment Share on other sites More sharing options...
marlboro man Posted October 10, 2011 Author Report Share Posted October 10, 2011 I'am really to cheep to spend money on stripers so hear you go & hear is one is one that had a bad ass body trying out a pole when we tryed to start a home based stripper pole business but photo sucks Quote Link to comment Share on other sites More sharing options...
max power Posted October 10, 2011 Report Share Posted October 10, 2011 Awesome write up, Joel. You crack me up man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.