Ackbar00

I LOL'd

Kind of broke down like this: Just never seemed to end. Lots of money for no time driving it. I checked, 8 miles on it in 2013. ALLWAYS working on it. Never really got it to run what I wanted at the track. Family hated it. List never ended... I wanted to get into a fun driver, and I think this will float the bill. Only thing I could see is selling it to fund my AC Cobra habit. Figured if I wanted something fast again, Id go the junkyard LS route in something that was not as nice. More race car in race car clothes, not race car in street car clothes. Here is the original for sale ad and the parts that are on it: 2004 O/W Mach1 Kenne Bell S/C ,lots of mods ________________________________________ Up For Sale / Possible Trade is my 2004 Oxford White Mach 1. Here is a list of Mods: 2004 Oxford White Mach 1 Mustang 40th Anniversary Car IUP Package Saleen S281 Wing Limited Production Vehicle Engine: Stock Freshened Short Block 98 Cobra Cams Comp Cams Valve Springs and Retainers 2.1 Kenne Bell Twin Screw Ported Cobra Lower BBK Twin Bore 65mm Throttle Body JLT RAI Setup Powder Coated Front Timing Cover (Gunmetal Mettalic) HydroDipped White Base w/ Black and Grey Dead Head Skull: Valve Covers Coil Covers Altenator Relocation Brackets Water Pump Pulley Radiator Cover- Moroso Aluminum Expansion Tank Moroso Aluminum Fuse Box Moroso Aluminum Power Steering Resivior Moroso Aluminum Brake Master Clyinder Fuel System: 60 # Injectors 90 mm Big Mouth Mass Air Meter Kenne Bell Boost a Pump Gt Super Car Fuel Pump Setup Trans: Factory Tremec 3650 Trans Ram Hd Clutch Setup Ram Aluminum Flywheel Exhaust: BBK Lt Headers BBK O/F X-pipe Flowmaster American Thunder Cat-Back Also have extra BBK X-pipe W/ Hi Flo Cats Rear: Ford Motorsport 3.73 Gears Ford Motorsport Trac Loc Suspension: H&R SS 2" Lowering Springs No Isolators Tokico Struts and Shocks Brakes: Factory 13" Front Brakes Factory 11" Rear Brakes MGP Mach1 Engraved Red Caliper Covers Wheels: TSW Slips Black Center w/ Polished Lip Staggered Setup 19x8.5 Fronts Firestone WIDE Oval 500 245/35/19's 19x10.5 Rears Firestone WIDE Oval 285/35/19's Tires have 400 miles on them Interior: IUP Package Dual Pillar Pod White Boost/VaC gAUGE White Air/Fuel Narrow Band Gauge Mach 460 Sound System 6 Disc Rockford Fosgate 400W Amp Single Power Bass 12" Sub in Trunk Tinted Windows: 20% all around 5% Strip 35% Windshield Hid's W/ Smoked Headlights. I do have the stock headlights / stock intake with associated parts from when I did the S/C swap / Stock T/B / Stock wing / Stock brake light assy / Stock coolant expansion tank / stock P/S resivior / Extra BBK X-pipe w/ Hi Flo Cats All of these parts go with the car. I am asking 16,500.00 for the car, it has won several awards at MCA shows and local events. Car makes excellent power and is beautiful.

I really hate you Charlie.... These are the rims I am thinking. http://www.americanmuscle.com/glossblack-forgestarf14-9904.html http://images.americanmuscle.com/is/image/Turn5/29834_icon?&$200thumb$

Its already modded. Im just going to....... enhance a few things that wont require jack stands. Dicks......

http://www.superiorpics.com/movie_pictures/mp/2006_Snakes_on_a_Plane/2006_snakes_on_a_plane_wall_007.jpg

Wolverines!!!

Stock shortblock. When he put the KB on it, he went through the whole motor. Reringed, New chains, guides, bolts, gaskets, etc.. Charlie - I hate you, but that is a good point

Thanks everyone. Ill have to see about the coil covers in black. Sounds like a cool idea. Drag setup went with the car. I still have some black V6 rims with some 8.5's on them. I want to get the springs and the tune addressed before anything. Got the car titled and plates for it today. Car runs pretty good, but the it just sits too low for my liking. I get my bonus here in a few weeks, Ill start the modding then. 2004 MACH 1 PRODUCTION NUMBERS (Color/Trans) # Vehicles Paint (Exterior) Engine Transmission 1029 AZURE BLUE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 280 AZURE BLUE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 842 BLACK CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 217 BLACK CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 895 COMPETITION ORANGE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE5-Speed 124 COMPETITION ORANGE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 787 DARK SHADOW GREY CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 251 DARK SHADOW GREY CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 512 OXFORD WHITE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 179 OXFORD WHITE CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 624 SCREAMING YELLOW CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 139 SCREAMING YELLOW CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto 956 TORCH RED CLEARCOAT 4.6L 4V DOHC V-8 ENGINE 5-Speed 296 TORCH RED CLEARCOAT 4.6L 4V DOHC V-8 ENGINE Auto I'm surprised they made more orange 5-spees than white.

Yeah, wheels do look better in person, but prolly will change them. Looking at Forgestar F14's. The skulls. Cant do much about the motor, but for the rad cover, going to put a stock one on there to try and tone it down a little. Going to take off the caliper covers, put a better CAI setup on it, raise it back up a little, get rid of the dual pillar gauge setup and just run a steering column with a speedhut boost gauge. Put a MGW shifter and a Raptor shift light.

Turbo car is gone. http://i980.photobucket.com/albums/ae290/ackbar00/Mustang/IMG_2712_zps7f6acf87.jpg On its way to New York. Ended up trading for this: http://i980.photobucket.com/albums/ae290/ackbar00/Mach%201/mach11stplace_zps6b16afb9.jpg http://i980.photobucket.com/albums/ae290/ackbar00/Mach%201/IMG_0590_zps800cb246.jpg 04 Mach 1 with a Kenne Bell. Has some nice supporting mods. Supposed to make 470. Just wanted to get back into a driver and not spend so much time and money working on the turbo car. I have a few things planed for this car, but nothing major power wise. Figured if I just have to have something fast again, I just build another fox, but that one would be LS powered. Was hard to give up the turbo car, I had owned it for 17 years, but felt it was time to move on.

If you can find one allready built for the price listed: https://www.factoryfive.com/kits/33-hot-rod/ Other than that, AC Cobra clone. http://www.ffcars.com/forums/18-factory-five-cars-sale-wanted-sponsored-intercity-lines/367962-ffr-mk-iii-408-stroker-triple-black.html

I want to clone him so he will live forever in the core.

I just had mine renewed. This was the process I followed here in Dayton. http://www.mcohio.org/sheriff/CCW_Checklist.pdf Mine was ready in 2 days.

WOW! I lol'd though.

Its the suck zone http://4.bp.blogspot.com/_UpGCdtnJFw4/SIfL3vx0i5I/AAAAAAAAAEA/sQf7A4qs24U/s400/twister.bmp

Hahahahahahahaha!

Merica!!

Ive used glue traps before. Worked well.

40 roll?

Sweet. I want the same thing in OD Green.

Could you "technically" carry this?

Nice, like the white. 40 roll?

A guy I work with, his brother helped make this. Looks to be a nice piece. http://www.thefirearmblog.com/blog/2014/01/01/remington-announces-r-51-pistol/ http://www.thefirearmblog.com/blog/wp-content/uploads/2014/01/R51-BeautyShot-660x621.jpg

"Well whoopty fucking doo. Hey man, I'm impressed." http://horrorfanzine.com/wp-content/uploads/2011/10/aliens-05.jpg