Dave1647545494

nice numbers that torque curve is awesome

http://i75.photobucket.com/albums/i284/meagmerriman/rangerleft.jpg http://i75.photobucket.com/albums/i284/meagmerriman/rangermotor.jpg http://i75.photobucket.com/albums/i284/meagmerriman/rangerright.jpg http://i75.photobucket.com/albums/i284/meagmerriman/rangerwheel.jpg I will be picking this up next weekend more pics to follow as i finish the swap new progress pic on page 2 post number 45

maf is sold pony wheels sold doors sold thanks everyone who bought parts today

if you want to do meets on sunday afternoons the parking lot at ntb is free because we are closed

+1000 always mount the bar to the frame and then install the links

its under 20 bux at any part store in town

when my jvc died it was just a power supply its worth it to take it to a tv shop and have them check it out i got me set fixed for under $100

bwahahaha

looks good

you can also loosen up the bolts in the track for a little extra room

yep remove the ddor panel and there should be bolts or screws holding the glass to the regulator be carefull not to bind the glass when you pull it out or it will break

send turborust a pm he loves those cars

lets not talk about bumper cars you've wrecked more than your fair share I got my 20 do I have a bet or not

10 bux says the motor knocks or smokes like hell when you finally get it running another 10 says that t-5 lets go in under 500 miles

drop that DR down to about 15psi and do a good burnout that car 1.45 60ed for me back in day with ladder bars and an airbag in the rr

haha I didn't even own a computer when cr started so I didn't get to officially join the board untill 02 anthony had just come back from florida and about torn the nose off of his camaro pulling into my parents driveway to say hi I was putting one of many engines in my skylark

+1 the shop press at ntb is mine becuase my store manager is a tight ass piece of shit and I needed a press to do hub bearings if you want to drop the shit off I'll put i together for you or you can bring a truck and borrow the whole works

sounds like it might be missing a part or something I can come look at it next week one night after work if you want shower valves are pretty straighforward

driveshaft is sold plenty of parts left I will seperate the motor if there is interest $400 for the shortblock with e-cam good timing cover and dual return pan $1200 for the afr 185's with roller rockers, tall valve covers, and arp bolts

newbs welcoming newbs we had a festiva with a motorswap that got whored around here for awhile back in the day it was even the same color plus rep for having a ford

you can go from 275mm wide and 28" tall to 295mm wide and 30" tall maybe a little bigger if you roll the lip a little and use a wheel with a dead nuts offset

no problem they made a world of difference in the way the car drove make sure when you install them to leave the bolts loose and then load the rear up with a jack before you tighten them or they will bind up and tear bushings

oh and don't buy that tire from summit we have it in stock downtown 232-8881 ask for derek

275-60-15 is it with out minitub send me some pictures I want o see how it turned out