Dave1647545494

buckeye auto parts on mckinley is showing one in stock on car-part.com with no price you might give them a call and see if they still have it

I've got a gt-40 manifold and 1" spacer I'd make you a deal on if you want to retain the stock style pistons without flycutting you'll need a 1.94 valve or smaller and under .500 lift on the cam you might want to look at a set of AFR 165's

there are two stations at groves and hamilton the one on the east side of the road has the 109 and the c-16 the station on the west side of the road has 100 unleaded and 110 leaded hth

pretty sure he is looking for a hose

(Meagan posting): Airtran is a little more pricey but, they offer the direct flight...so no airport appreciation, aka layover. Delta is always nice to fly but, they have very few direct flights now. Most flights layover in Atlanta or Cincinnati. Southwest offers a good price and fewer b/s fees as far as bags, booking, ect. They also do not have assigned seats unless you pay to upgrade your seat. Say you’re taller and want an emergency exit row for the extra leg room. When I still was a flight attendant people would fight over the emergency exit row. My younger brother has been working for NASA for the last year and lives in Cocoa Beach, FL. He comes home every few weeks and drives from Cocoa Beach which Melbourne Airport is not far from to Orlando to fly home. He said that it is about a 45 minute drive and all highways so it's not bad at all. BTW he normally flies Airtran.

almost missed it

video or it didn't happen

I musta just missed the party saturday thanks for looking at dad's rusty trash truck he's going to start getting quotes on the steel this week sometime

buy a franchise and open one then really your not missing much its standard fast food shit like everywhere else

maybe.... diesels last longer than gas trucks and that module only comes on the diesel so you might get lucky

4000 pounds in the trailer 3000 pounds in the truck and your good

I measure it all together on chevy's (only thing the pinions seem to leak on that I see ) no noises yet but these are all axles that just have leaks and not noise

Part No. RDS55072 thats a fel-pro part number call back and see if they have it in stock

too much like work for me you need a couple of 18yr old punks for that kind of work

I can ask the penzoil man what the deposit is on the plastic drum our washer fluid comes in you can probably buy one of those or you can call them on tuesday McGlaughlin Oil Company 614-231-2518

what are you moving?

I used Columbus Col-Weld

make it yourself you can get all the line and fittings at summit or jegs

looks like it can tow about 15000 pounds and max in the bed with a single axle is 3500 lbs rent a trailer and your all set

you measure the torque as an assembly this gives you an idea of how tight the bearing is ( like when you do front brakes on a 2wd truck or an older car) it works and its in the book

if you decide to tear into that yourself measure the turning torque on the pinion before you remove the nut and then when you put it back together make sure its the same or a little tighter I also recomend a new nut and a new crush sleeve it might also just be a good time to upgrade to a 9" or a 12bolt if you drive the car hard at all

good deal

https://www.asset-auctions.com/cgi-bin/mndetails.cgi?sallen70 looks like maybe this place has been out of business for awhile, but if you have a vintage olds you need parts for or your looking for good deals on shop tools there is a little bit of everything enjoy

make sure its in park again look for a button on the colum to release the key

if only you could use an 8.8