TurboRust

I fish buckeye a ton.. at its current level of "winter pool" there is still about 30-36" of water up against the metal wall(as measured near the yacht club) So to do any repairs to it, I would assume the lake would have to go atleast another 3 ft down. In its current state most of the channels and some of the coves and bays would be just muck once the ice melts. Remove 3 more feet and you will be able to walk across the lake in most parts(if you didnt sink in mud) I dont know what the answer is here, but its ugly either way.

check out car-part.com and see if any local yards have a wheel.. doubt theyd be open on sunday but i'd try and if not get one monday at 7 or 8 am and get on the road.

i've got some racheting ones that work really well but i'm in baltimore just outside of pickerington

69-74 blocks are the best and will see that in hwp numbers. newer roller blocks are probably alot safer in the 600-650whp range

700-750whp with good guts.. goto town son.

Bottom with stock wheels

Oh well I now have 2 $60 elements in my free hot tub.. I ain't bitching too much... I got soaked replacing it though.. this is an older tub with no shutoff valve... neighbor is a plumber and helped me get it in there as quick as possible we are going to pipe in a check valve this summer

And fixed with a new element. . Bad news 7th month on my 6 month warranty part

well I had gotten the element from all seasons spas in hilliard and upon talking to them today their service tech told me to replace the heating element no matter what it was ohming and they would warranty my old one out. so replacing after work today. spa water is down to 63. so hopefully i can save it in time

That first quote was from the link Jason had put on there.. didn't make since to me either.

Regardless which type meter you are using, you should not be getting a reading, if you do; the element is shorted and needs replacing Spadepot.Com says To test hot tub heating elements for integrity, use an ohm meter on its lowest setting. With the meter's test leads, measure the resistance between the two terminals as shown. The acceptable resistance range for heaters used in most hot tubs is between 9 - 12 ohms (a few may be as high as 25 ohms, depending upon kilowatt rating). A reading which is too low indicates a bad unit: short circuit. A very high (or infinite) reading indicates a bad unit: open circuit or limited conductivity.

Went out tonight to turn up the hot tub and had no power. it was just working 2 days ago. When I first got the tub it had a bad heater element kicking the gfci, new element and all has been well for 5-6 months or so. So disconnect the heater from the board and the breaker doesnt trip, tub comes on and pumps run. Look online on how to test a heater element. It should be at 9-12 ohms between the terminals it measures 11.1 ohms.. so that says its good, but when connected it trips the breaker....help water temp is at 70 already i have it circulating and a heating pad where the heater would normally be but that can only do so much i'm on borrowed time... post, pm ,text 614-519-2971....heeeelllppppp

Can you pm him and see what he'd let the hunter alignment setup go for(computer and heads, don't need the rack)?

looks awesome but with some cheapo performance tires... share the sizes when you get a moment i'm curious why they did not put something stickier on it

I have never been to Baltimore yet..lol I'm on refugee outside of pickerington

Dear moderators please don't edit my posts, instead laugh at them

yeah 33 sucks i live in baltimore and drive to obetz everyday. i've never gone this route but give it a try I-70E to I-SAAB south take exit 32 for Saab street 2nd left on Saab avenue then after the Saab dealership on the right take the next turn at Saab circle. you have arrived at your destination

Hi! 614 519 2971shoot me a text

40k allseason mastercraft Mc440 made by cooper. $302 08 installed in your driveway Tax incl.

Pm me for what you're thinking on tires, I can get anything.

Thanks mang, I'm glad we got you rolling again!

you got...the change...i may...even come help!!

jesus and they let him keep running time after time... apparently money will buy anything

5X115 BOLT PATTERN

this thread wins at reading.... and Aj.. I know how clay shops... I've sold him 12 or 16 tires over the last 5 years. thats why i'm suggesting 1 pc wheel. oh and your 3 pc wheels dont make your broke dick sc300 look any better. douche