timmy43016

Bump...OBO?

Sale is pending. I did put an OBO on it. I'm reasonable and would be willing to negotiate. That being said sale is pending and will let the thread know if sale falls through.

No one? Not appealing or priced too high?

There is nothing bad I can say about this scope. It is bar none the best scope I have ever owned. Purchased 1.5 years ago from certified dealer. It has the green horseshoe tritium with 25 years half life. It is bright as hell and ALWAYS on target. I zeroed in at 100 yards now. I always take it off the rifle after every trip to range. It is in mint condition. No scratches or scuffs. Glass is immaculate clean with zero signs of wear. The glass in this scope is as crystal clear as they come. Those who have used or seen them know. It is a fixed 4x32 magnification. Manufacturer specs listed below. I have never had to adjust zero on this except initial zero. Even when i remove it and put it back on the rifle it still holds zero. I have 200 rounds through this scope. I mounted on rifle for purposes of photos. You may need to blow up the reticle pic to see the tritium in action. Always kept in its hard case. All original accessories etc including hard case come with scope. Asking 900 for a 1500.00 scope. WELL WORTH IT. If interested please text Andrew (me) at 614-307-669 five Link to manufacturer specs. https://www.trijicon.com/na_en/products/product3.php?pid=TA31H-G http://i448.photobucket.com/albums/qq203/picasso007/photo2-2.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo1-2.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo3-2.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo4-2.jpg

I have a 1943 stamped Nagant that has been "sporterized" with a Bushnell 3x9 variable scope. The scope illuminates red/green. The scope rarely needs adjusted (usually only a click or 2 due to traveling etc. This rifle has the straight bolt on it so its much easier to use. Comes with bipod and 60 rounds of 7.62x54R. 40 of those rounds are surplus and the other 20 are new higher grain. This rifle is awesome and is a blast to shoot (pun intended). I do not have the original wood stock, but I do have the original leather cleaning kit pouches with all accessories. I have a sling for it also, but its just not pictured here. It is perfectly zeroed in at 200 yards now and have included a photo of cold bore shot at 200 yards. Price is 350 for everything OBO. If interested please text me (Andrew) at 614-307-669five. This rifle will NOT disappoint. http://i448.photobucket.com/albums/qq203/picasso007/photo1-1.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo5-1.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo4-1.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo3-1.jpg http://i448.photobucket.com/albums/qq203/picasso007/photo2-1.jpg http://i448.photobucket.com/albums/qq203/picasso007/photocopy.jpg

Selling for a buddy... Check the link. 900 on CL, but 800 for CR. http://columbus.craigslist.org/pts/4653871432.html If interested please text Andrew (me) at 614-307-six695

Posting for a buddy. NIB. 1500.00 on CL, but 1400 on CR. Check out the link. http://columbus.craigslist.org/pts/4653872360.html If interested - text Andrew (me) at 614-307-six695

Just left cardinal health as an international portfolio manager. Managed all of cardinal's infrastructure projects abroad (well the portfolio) and just started today at alliance data as an sr IT PM. I have a BS from Franklin and a lot of Microsoft and business certs (PMP/LSS/ITIL). As some others have stated...do what makes you happy. I sold my soul for money, but as much as I like having it, I want to punch and/or strangle people daily. There is far more to life than sitting behind a desk and my advice is do something you can be proud of. Find the thing that makes you happy and do it regardless of how much you make.

Yes that was his name...and yes this is what I was told not just once, but twice. Same guy both times. He showed me his suppressor that he had bought and was waiting for his stamp to come in so it was in a locker. All of the above is true story. I really appreciate the info and appreciate everyone not being huge cocks while providing it.

Whats fail...curious? Went to Blackwing interested in suppressor and a 14" barrel for AR. Was told by one of the shop guys who let me know he was a police officer (not that makes any difference) and kindly let me know that in Franklin a trust is required which will cost me 600 because Franklin is not super NFA friendly (pay the trust to avoid the signature). 300 up front and upon completion the other 300. After that I would have to fill out the ATF paperwork and pay the 200 stamp. For a trust the trustees names are etched into the class 3 part...barrel...suppressor..whatever. Then I can purchase the parts after the wait for both is over. So just curious on what the issue with the post is? If I am incorrect in any of this post then I will go tomorrow and apply. Feel free to provide me better info as it will be really appreciated. I have looked at ATF.gov and a few other sources all saying generally the same thing about trusts and stamp+a lot of time...

Assuming you are not in Franklin county...they pony up another 600 for a trust, wait another year, have to etch the trustees names into so you can never sell the damn thing, then pay tax stamp 200, wait another year and get the stamp.... otherwise roll it as a pistol.

If you are looking for a solid scope...I suggest the Nikon p223. You can get them in variable scope 3x9 for 150.00 and 3x12 for 200.00. I bought the 3x9 and there is nothing bad I can say about it. I have put a ton of rounds through and it has never lost its zero. Glass is as clear as my trijicon 4x32 tritium. The p223 is well worth the money and is designed for the AR. Absolute recommend... I grabbed some UTX quick release mount (30.00 at westland gunshot from kenzies optics booth) for it and swap out the triji/nikon regular in the field and both are usually just about on point after swapping and not needing to zero again. I know you said nothing less than 10 so look at the 3x12 variable. kickass... Link:http://www.nikonsportoptics.com/en/Nikon-Products/Riflescopes/8496/P-223-3x32-Matte-BDC-Carbine.html

Here is my sporterized nagant. Stamped 1942. A lot of mods and a lot of fun getting it to this point. Extended the barrel also. Cheap ammo and fun as hell to shoot. Kicks like a mule and doesn't really look like the natant of old so it suits my taste. As previous posters are saying...its not everyones cup of tea. So I made it my cup of tea. http://i448.photobucket.com/albums/qq203/picasso007/photo-6.jpg

SOLD Please lock it up.

SOLD

I have 2 HP Procurve switches. Looking for 40.00 for the pair. http://i448.photobucket.com/albums/qq203/picasso007/photo-5.jpg below are specs... HP J4121A ProCurve Switch 4000m 10/100BaseT Module Desktop Switch Good switch Engine DB9 module included Network Moves and Changes. When devices are moved in the network, and become connected to a different switch port, the Switch 4000M and 8000M automatically recognizes the change and updates the address table with the new port location of the device. Communication with the device is automatically maintained, without any address table manipulation being required. Simultaneous Network Communications In addition to traffic isolation benefits provided by the Switch 4000M and 8000M address table operation, the switch also enhances network performance because it can conduct multiple, simultaneous network connections. Instead of sharing the network bandwidth, as in connections to a hub, each connection has its own 10 Mbps, 100 Mbps, or 1000 Mbps bandwidth to use. Effect of VLANs If you configure multiple virtual LANs (VLANs) on the switch, each VLAN behaves as a "logical switch" containing the switch ports that you assign to it. Each logical switch behaves as an isolated broadcast domain, just as if it were a separate physical switch. The forward, filter, and flood behavior described for the physical switch above, operates the same for each of the logical switches defined by the VLANs: packets are forwarded or flooded only to the ports that are within a given VLAN. Just as for separate physical switches, there is no communication between ports that are in separate VLANs unless the VLANs are connected by an external router. For more information on configuring VLANs and their behavior, see the HP ProCurve Switch 8000M and 1600M Management and Configuration Guide that came with your switch. Works Perfect HP Part No. J4121A SN: SG11861424 100-127VAC 200-240VAC WITH PROCURVE 400M/8000M POWER SUPPLY UNIT AND POWER CORD. With 80 ports costing less than $5 per port. A Great switch for medium Enterprise.

Office closed and ripped out the networking gear. This piece is 574.00 new and looking for 200.00 for it. Specs below. http://i448.photobucket.com/albums/qq203/picasso007/ScreenShot2013-09-11at95350AM.png The Network Composer DC30X delivers enterprise-class Internet controls to larger organizations including schools, school districts and medium sized businesses. The DC30X was built specifically to provide these organizations with a comprehensive approach to controlling connections of up to 20Mbps throughput. If you're interested in controlling Internet content or getting better performance out of your limited bandwidth, the DC30X delivers exactly what you need. This fully-featured device ensures your Internet connection performs like it should while protecting users and limiting your risks. Product Specs Specifications For Internet Connection Speeds Up to 20 Mbps Encrypted Web Traffic Maximum 5 Mbps User License Range 5,000 Capacity Web Requests 330,000/hour - 20 Mbps HTTP requests Maximum IP Hosts 5,000 Maximum IP Flows 500,000 Application Identification Signatures 575 Maximum Signature Shapers 256 Interfaces Network Interface 10/100/1000 RJ45 - 2 ports Console Ports Male DB-9 RS232 - 1; RJ45 10/100 Additional Information Device Management DB-9 Console Port; HyperTerminal RJ45 Console Port; Web GUI, SSH Operating System Linux Kernel Height 2U Power Supply 110 to 240 VAC Content Filtering HTTP Content Filtering Safe Search Integration URL Database Matching URL Key Word Search Dynamic Content Analysis Filter Avoidance Database Match Filter Avoidance Dynamic Content Analysis Filter Avoidance DNS Lookup Anonymous Proxy Guard (non Port 80 HTTP) HTTPS/SSL Content Filtering URL Database Matching Certificate Verfification SSL Certificate Filter - no deny access page SSL Certificate Filter - with deny access page HTTPS Full Dynamic Content Filtering HTTPS Filter Avoidence Dynamic Content Analysis Application Control Application Control Limited Application Blocking Dynamic Application Bandwidth Control Basic Application Signatures Layer 7 Application Signatures Detection of port hopping applications IM Block Monitor Bandwidth Control P2P Block Monitor Bandwidth Control File types Block Monitor Bandwidth Control Bandwidth Shaping and Prioritization By User By Group By URL By Website Category By File & Mime Type Threats Malware Anti spyware URL Class ID MD5 Sum Client PC Remediation HTTPS Spyware Detection Anti Virus Real Time Monitoring Bandwidth & Applications Total Internet Traffic Application Traffic Web Browsing URL Category User

+1...thats exactly what I was thinking when i saw that. WTF.

Sale Pending

Can be mounted on scope or by itself...i had it on a picatinny at the 1 oclock. pic of what it looks like mounted directly on a triji scope. http://www.ebay.com/itm/Trijicon-ACOG-6x48-Red-Chevron-TA75-Mount-M1913-Rail-8-0-MOA-RMR-Sight-/330987386950?pt=LH_DefaultDomain_0&hash=item4d1062b846

SOLD

HERE IS A LINK... http://www.cpfmarketplace.com/mp/showthread.php?195648-FOR-SALE-Tritium-Cubes-and-a-Key-chain-US

do want..add me please.

WTF? No...just no. FAIL.

+1 on all saying 275's with zero issue...mine are completely bald and I still have no issues.