TheBussman1647545507

I've installed hundreds of these things. it's a shame you have to splice into the original harness. i see them at my current job from time to time. Still have the factory bypass jumper too. They're are a few versions in the pastime series and some have GPS onboard too.

I've been doing it for a few years now and I'm finally making the jump to all-grain brewing and kegging. Should be up and running before spring, this cuts costs at both ends. Your best bet on a brew pot is to cut up an old keg. (you prob want to start with a 1/6 barrel.) I made a jig that fit into the siphon tube and bolts to a grinder if you want to barrow it. a plasma cutter is even better though if you can get your hands on one of those. Hit me up if you have any questions.

bump!

This is the engine out of my DD witch now has a silvertop in it. Complete motor minus the waterpump, knock sensor, oil presser sensor and alternater. includes 10,000 mile old flywheel in good shape. also have the ECU free if anyone wants it, and the ebay header! 261,000 miles, burns a little oil. would be a good 7AGE project for someone. video of it running right before i took it out available. located in pataskala. http://i.imgur.com/iTY8Hl.jpg $150

Who made the wiring harness? can i hear it run? awesome car, I'm finishing up my 20v swap tomorrow.

Import Direct, Tongda automotive in Clintonvile.

don't feel like buying new ones and thought someone here might have a set they want to get rid of let me know.

damn that really sucks i would've rather had that then my 60 in a 55 i just got in Michigan a couple weeks ago.

ohio eWaste will buy it but i think you have to drop it off

all i can say is I've been in two different shops, one used Chinese lifts, they last 1.5 years and then parts are not available for repair, and the other used bend-paks that so far are 10 years old with no problems.

INFINITI Years Model 2003 - 2008 FX35 1991 - 1996, G20 1999 - 2002 G20 2003 - 2007 G35 1996 - 2001 I30 2002 - 2004 I35 1993 - 1997 J30 1990 - 1992 M30 2001 Q45 1997 - 2003 QX4 NISSAN Years Model 1995 - 1998 200SX 1989 - 1998 240SX 2003 - 2006 350Z 1993 - 2010 ALTIMA 1990 AXXESS 1990 - 1994 D21 1999 - 2004 FRONTIER 1989 - 2010 MAXIMA 2003 - 2007, 2009 - 2010 MURANO 1991 - 1993 NX 1990 - 2004 PATHFINDER 1990 PULSAR NX 2004 - 2009 QUEST 1991 - 2006 SENTRA 1990 - 1992 STANZA 2000 - 2004 XTERRA freshly cleaned and re-oiled. $25

bump

it's a little big for me, I'm 6' 4" and 165lbs. Feel free to try it on if you like.

bump

Used in good shape. This jacket has shoulder pads and elbow pads, has a compartment for a back protector if you want to add one. Removable full liner. size: S/40 http://imgur.com/qK8tPl.jpg http://imgur.com/jIumYl.jpg http://imgur.com/ztD1xl.jpg $100

http://www.treadwright.com/ they're retreads but i know alot of guys that have ran them and been happy with the results, $551 shipped for four.

I've still got some side plastics that aren't on there either right now.

Picked up a 86 VFR 500 today. It's going to be needing new fork seals, some body work, carb rebuild and a new front tire and hopefully it will be good to go after that. http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0222.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0221.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0219.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0220.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0218.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0217.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0216.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0215.jpg http://i475.photobucket.com/albums/rr116/RadioFlyerGlass/VFR/IMG_0214.jpg Not too bad for 300 dollars?

i decided to go with m&m thanks guys

i had an 84 gas, it had alot of problems but it was hosed from the start, i paid 270 for it so I'm not complaining. i defiantly have respect for them. 800 sounds really cheap for a diesel.

how can i get in touch with this Randy of Whitehall? Google says there's only one machine shop in Whitehall, called GTS automotive and they said that they're not a machine shop.

Just picked up some ITBs with the motor I'm dropping in the corolla well see if it sounds the same. He could at lest get some velocity stacks w/pantyhose filters.

finally they've gotten this far, the full game was supposed to be out what 2 years ago? maybe by the end of this year, and yes i will pay as much as it cots as long as it's under $200. kinda shitty they're charging that much, I mean isn't wow the most profitable game ever?

I've never needed any machine shop work done until now, a got a 20V 4age that needs a block hot tank, head cold tank, hone, and possibly a crank grind or balancing. it's just going to be a DD. thanks

this one only has one piston per cylinder though. booth seem like awfully good ideas, I hope they get put in production soon.