Jump to content

Tindall2006

Members
  • Posts

    335
  • Joined

  • Last visited

Everything posted by Tindall2006

  1. I don't remember if that made a diffrence... I would suggest taking a resistance reading, and try some ether to get it running and warm then try taking another reading to see if it is working. I don't think the service manual has any values for it. Your best bet is find a buddy with a car that is running, and switch out a few sensor's. I would volunteer mine, but i am atleast an hour away. EDIT: or just go to autozone, buy this, and see if it starts, if not return it http://www.autozone.com/R,APP224827/vehicleId,1607701/initialAction,partProductDetail/store,1731/partType,00113/shopping/partProductDetail.htm I'm going to search in the service manual for a test
  2. my dad's laser wouldn't start when the coolent sensor went out. Crank it over a little and pull the plugs and see if they are flooding out, or seem dry.
  3. Ya'll should have given me some forward notice, i was there working and could have given a CR hookup!!
  4. Tindall2006

    Sledding?

    I'll stick with the type of sled's that have two ski's and about 100 hp in them lol
  5. I went driften for my first time tonight in my Talon, it was a fucking ball!!!
  6. also, another thing i thought of anyone have a good battery they could sell? I hate to buy a new one, there expensive lol
  7. I like it because it hides the oil leak from the spark plug gaskets.... I plan on fixing that with my timing belt change... i really just need to yank the whole head off my DD laser and figure out the low compression for sure!!
  8. Also thought of something else I really need. I need one stock talon rim. Looking for one like the ones on this car. http://i51.photobucket.com/albums/f374/tindall2006/100_2868.jpg
  9. I might make it down, I talked to thorne about riding in his car before and maybe I can make it down then. Would a snowmobile helmet work? what is the requirements on helments?
  10. I really like using car washes to spray off parts and stuff. I normally show up, put the parts out and spray them down with degreser and let them sit for a few min then spray them down. Much easier then pulling the power washer out in 20 degree temps. I can't wait to take the talon down there and spray out the engine bay. I will probably lose 20 pounds in greese
  11. You must have a badass paying job to take a 20k car out and play in the mud... That, or you have bigger balls then I do. As much as I would like to do this with my talon, i would hate to...
  12. http://www.walmart.com/catalog/product.do?product_id=5933976 something like that would work perfect. I know they sell cheaper versons. A guy on another forum would post up pictures of his game camera, it was pretty badass. Also, if you get one with a flash, it might scare away whatever is coming after your stuff.
  13. I have a 1G talon and laser, I need a timing belt cover and one of the spark plug cover's (maybe two)
  14. I am pretty sure you pry out the little trim peice around the factory unit, then that will revile 4 screws, take them out and the whole unit comes out. check http://www.dsmtuners.com
  15. 4wd truck, 4 low, long chain. Well... I guess you want to drive this again... Get a bigger hammer and keep at it! can you get a pry bar behind the wheel spokes? Maybe try tapping it from behind or tieing a rope to it and pulling on it some? You could probably get better leverage this way.
  16. I'm with this guy, It is catchy, has a good beat, and a decent story meaning. did i forget she completly sounds hot
  17. Wouldn't a rear mount turbo like this give you a large amount of turbo lag due to how far away the air has to travel? Also, that air filter is pretty vulnrable, i bet it wears out alot quicker, and think if you accidently throw a stone... Can someone explaine why you would do this?
  18. Whoops... I am very good at typing before i think.
  19. yeah, it was defiently hard to not drive too fast this morning and end up in the ditch, though i defiently kept the cool
  20. It was a Pacifica, he was going way to fucking fast as the entire front end looks like it blew up... School bus, no seatbelts, and kids don't sit in the seats properly (i know i never did) He T boned the school bus, and spun the bus in a 180, the bus was probably 30 feet away from the impact, so it got hit pretty hard. I don't think any of the kids had major injures, I know a few girls where crying as the came out, and one girl was complaining of a hurt leg, not sure if it was broken or not. the guy was really bloody and was flown out on the helicopter, he had to be cut out of the car. Every kid on the bus had to go to the ER though, because they where all minnors.
  21. Where do we sign up for the ride along?
  22. No SR 68, there is no way you could have drove by it because we had the entire road closed, i had to drive on the wrong side of the road for 1/4 a mile to get to the scene.
  23. SLOW THE FUCK DOWN, I just had the joy of unloading 5-6 hurt kids off a school bus that some guy hit. That is all, thank you
×
×
  • Create New...