200

I love my 05 S60 R . Only complaint is the turning radius sucks. It would be easier to park a battleship.

Just to point out, that gas station wasn't full of Toyota Prius' or VW turbo diesels so it can't be hurting people in LA enough to change what they drive.

Thanks

Car has forged internals and strength of bottom end is not going to change hp output. Most rb25s I've seen on youtube on pump gas are making 400-430 on 20 psi.

In that year altima the cam sensor is in the distributor. You check for vacuum leaks? The intake boot between the air filter and throttle is common for cracking.

Spent last evening at DTM scaling the MAF and tuning the 240 the RIGHT way. The car now runs smoother than ever and the throttle response is great. Brian had the MAF close after 1 pull. So for those of you with imports or power fc call brian, he doesnt just do mustangs and gm. If the maf wasnt pegged we could have dialed in even better. Brian if you would like you can post the graphs.

Not sure what you consider cheap, but Napa can order them for less than $150 PN 3804389. Obviously used would be cheaper, but that isn't too bad for a new one. You call LKQ/Action Crash?

Looks like it could use directions to a salvage yard also

I was at the track on Sunday with the guys in garage 28...all the civics. I'm afraid to get on the track, I've heard it's addicting

Saw this car this morning in Hilliard... http://www.columbusracing.com/forums/picture.php?albumid=622&pictureid=4990 Didn't get pulled up close enough to get a good look at the guy driving though...:bangbang:

Got a press at the shop I work at, if anyone needs it e-mail me, sorry I was too late

Didn't know there were other 240's on CR

I want one

Discount auto glass in bexley 231-9999. Im sitting here now. She said $150 out the door with tax

So Doc did you get your battery or do we need to order some more parts from Spain?

http://www.240sxforums.com/forums/gallery/data/500/medium/Beater.jpg Only pic I got

Post the pic before I do

You sucked less than usual...nice job

Fuse 106 under hood feeds relay and fuse 15 underdash feeds the switches

WonderBoy throws rainbows in the sun also without carlashes

You check fuel pressure at all? We've had two Audi's and a BMW recently w/ same problem. They would just stall almost randomly after being started. The fuel pumps were getting hot and shutting down.

Can't you just buy a threaded vac port and then drill/tap whatever you are sourcing the vac from?

Looks slow...j/k

Rack $280 Labor $367.08($87.40/hr 4.2hrs) Align $50 $697.08+tax

Bore 40 over, deck head, valve job. I dropped them the long block so they can do assemble/disassemble there. Also, I have ACL bearings and ARP studs they are installing with the new pistons/rods. I'm sure they can do all that, but it is still racing season so it probably won't be super fast.