Rocky31186
Members-
Posts
2,161 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Events
Everything posted by Rocky31186
-
I agree. Everything at work I could find with my eyes closed. At home? I spend too much time searching.
-
With more teeth on the gear, the less area you need to move the ratchet to turn the nut or bolt. Tight places, open places, it works great all over. I want to say most craftsman is under 50 teeth, maybe even 35 like most other manufacturers.. So double the teeth. I think a regular ratchet clicks once in 2" of movement, the snap on 80 tooth clicks about 8 times in 2".. I have the long 1/2" 80 tooth, the 3/8 long flex and short, also the 1/4", and 3" long 3/8 ratchet. Money well spent I could also say the Flank drive plus wrenches are also a great tool to have. Open end wrenches grip more than most 6point sockets.
-
She brought it back In and worked with another writer. They replaced the valve cover gasket for free. They rechecked everything estimated and said it didn't need rear drum brakes replaced. Just front brakes and tires which we already knew. If she didn't have me do all the work I would send her to you. But the only thing she has done there is rear suspension and oil changes. Funny about the rear suspension after being replaced she kept hearing the same noise. So she brought it back. Never found anything. Surprisingly enough, after the one year warranty they found the issue was a leaking strut. Wanted another 400$
-
Idk if I could pick one. Any of the high tooth snap on ratchets. Makes a world of difference.
-
A picture not in the shade would make it easier IMO.
-
Won't post video here?
-
Who has a 0% fail rate. As a mechanic the best maintenance and longest lasting cars I've seen are honda or toyota.
-
My mom just had her 2007 civic block replaced for free due to a crack leaking coolant. They fought with her. Her very next service lindsay honda said she needs Coolant flush (obviously was just replaced Valve cover gasket (was just removed to pull head, when I said something the service writer said they removed the engine from the bottom and never removed the valve cover) Also hit her with a brake fluid flush because it's causing uneven pad wear.
-
Worst Weld Ever? (Possibly worse than that "Turbo Manifold")
Rocky31186 replied to Fubar231's topic in Pics and Vids
I thought maybe it was Clay welding. -
I do not agree with garages. Unless they are separate. Blend on woods had walls but the top was open. You could go from garage to garage by climbing the wall. Something to look into.
-
The plastic ring broke off of the dip stick? Is the top of the dipstick still stuck in the hole? Sometimes you can heat a small wood screw and thread it into the remaining plastic, or needle nose pliers.. Some people just have to replace the entire assembly.
-
I personally like the car. Interior is far better than any VW in my opinion. I say go for it
-
How do you like it so far?
-
I recorded his reaction when he came in the room... his eyes were HUGE.. First night in the big kids bed was rough.. he was up at 3am playing in his room. Wife tried getting him to go back to sleep and he said no.
-
Got the race car bed for him. Looks nothing like what they had when I was growing up. I was going to mod it but was afraid the paint wouldn't stick to it. Still need battery's for the headlights to finish it. http://i801.photobucket.com/albums/yy296/rocky31186/Mobile%20Uploads/20140314_145328_RichtoneHDR_zpsy870oedy.jpg http://i801.photobucket.com/albums/yy296/rocky31186/Mobile%20Uploads/20140314_145106_zpsgixsv2oy.jpg Found a good use for my SRT license plate... http://i801.photobucket.com/albums/yy296/rocky31186/Mobile%20Uploads/20140313_185327_zps839sohkl.jpg
-
You didn't like the tree branch last summer? Lol
-
Nicest I've ever heard Jones.. Welcome.
-
Typically the cracks mean it is dried out and hasnt had the right conditioner on it... I found a youtube video awhile back on how to deep clean leather seats.. He used a special cleaner (A certain ingredient is to not be in it) A scrub brush. I sprayed the cleaner on, used the scrub brush and it lathered up. Wiped it off with a microfiber and then used some lexol conditioner. Made my seats look GREAT in the SRT..
-
For the Glock 26/27 Bought this last week and looking to sell. I didn't find it comfortable. $35 picked up http://i801.photobucket.com/albums/yy296/rocky31186/Mobile%20Uploads/20140311_161543_zps4mx6vib1.jpg
-
.... copied and pasted from my post...
-
(A)^No person shall possess a firearm in any room in which any person is consuming beer or intoxicating liquor in a premises for which a D permit has been issued under Chapter 4303. of the Revised Code or in an open air arena for which a permit of that nature has been issued. (B) (1)^This section does not apply to any of the following: (a)^An officer, agent, or employee of this or any other state or the United States, or to a law enforcement officer, who is authorized to carry firearms and is acting within the scope of the officer's, agent's, or employee's duties; (b)^Any person who is employed in this state, who is authorized to carry firearms, and who is subject to and in compliance with the requirements of section^109.801^of the Revised Code, unless the appointing authority of the person has expressly specified that the exemption provided in division (B)(1)(b) of this section does not apply to the person; ©^Any room used for the accommodation of guests of a hotel, as defined in section^4301.01^of the Revised Code; (d)^The principal holder of a D permit issued for a premises or an open air arena under Chapter 4303. of the Revised Code while in the premises or open air arena for which the permit was issued if the principal holder of the D permit also possesses a valid concealed handgun license and as long as the principal holder is not consuming beer or intoxicating liquor or under the influence of alcohol or a drug of abuse, or any agent or employee of that holder who also is a peace officer, as defined in section2151.3515^of the Revised Code, who is off duty, and who otherwise is authorized to carry firearms while in the course of the officer's official duties and while in the premises or open air arena for which the permit was issued and as long as the agent or employee of that holder is not consuming beer or intoxicating liquor or under the influence of alcohol or a drug of abuse. (e)^Any person who is carrying a valid concealed handgun license, as long as the person is not consuming beer or intoxicating liquor or under the influence of alcohol or a drug of abuse. (2)^This section does not prohibit any person who is a member of a veteran's organization, as defined in section^2915.01^of the Revised Code, from possessing a rifle in any room in any premises owned, leased, or otherwise under the control of the veteran's organization, if the rifle is not loaded with live ammunition and if the person otherwise is not prohibited by law from having the rifle. (3)^This section does not apply to any person possessing or displaying firearms in any room used to exhibit unloaded firearms for sale or trade in a soldiers' memorial established pursuant to Chapter 345. of the Revised Code, in a convention center, or in any other public meeting place, if the person is an exhibitor, trader, purchaser, or seller of firearms and is not otherwise prohibited by law from possessing, trading, purchasing, or selling the firearms. ©^It is an affirmative defense to a charge under this section of illegal possession of a firearm in a liquor permit premises that involves the possession of a firearm other than a handgun, that the actor was not otherwise prohibited by law from having the firearm, and that any of the following apply: (1)^The firearm was carried or kept ready at hand by the actor for defensive purposes, while the actor was engaged in or was going to or from the actor's lawful business or occupation, which business or occupation was of such character or was necessarily carried on in such manner or at such a time or place as to render the actor particularly susceptible to criminal attack, such as would justify a prudent person in going armed. (2)^The firearm was carried or kept ready at hand by the actor for defensive purposes, while the actor was engaged in a lawful activity, and had reasonable cause to fear a criminal attack upon the actor or a member of the actor's family, or upon the actor's home, such as would justify a prudent person in going armed. (D)^No person who is charged with a violation of this section shall be required to obtain a concealed handgun license as a condition for the dismissal of the charge. (E)^Whoever violates this section is guilty of illegal possession of a firearm in a liquor permit premises. Except as otherwise provided in this division, illegal possession of a firearm in a liquor permit premises is a felony of the fifth degree. If the offender commits the violation of this section by knowingly carrying or having the firearm concealed on the offender's person or concealed ready at hand, illegal possession of a firearm in a liquor permit premises is a felony of the third degree. (F)^As used in this section, "beer" and "intoxicating liquor" have the same meanings as in section^4301.01^of the Revised Code. Amended by 129th General AssemblyFile No.190, HB 495, §1, eff. 3/27/2013. Amended by 129th General AssemblyFile No.34, SB 17, §1, eff. 9/30/2011.
-
I know it's apples to oranges but my hot tub has a lot of up keep. Chemicals, changing water, cleaning, etc. We had a pool growing up, above ground. It was a lot of work. But technology has advanced and they have some things to make cleaning easier.
-
Anyone have any ls1 head bolts laying around
Rocky31186 replied to TurboNova's topic in Passing Lane
Any idea what size it is? is I may have a tap... -
Yes it has ball bearing slides.