Troy2285
-
Posts
32 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Store
Calendar
Everything posted by Troy2285
-
equipment specialist 1740-852-9480 i have bought about 10 commercial power washers from them. they also have a good used section.
-
We use allot of recycled material for a base under concrete/asphalt or new driveways, it does have debris in it. Sometimes it can be really bad too.I Always top off drives with #57 limestone paying $19 ton plus trucking. Our trucks charge $70 per hr.
-
Burton Metal on woodland ave 614-207-5045 ask for nathan
-
Any electricians on here? Service entrance question.
Troy2285 replied to Trouble Maker's topic in Dumpster
I moved the electrical panel about 20 ft to a closet on my rental a few years ago. Installed a disconnect on the outside with no problems when inspected. -
I do it myself. You can buy everything at tsc or rule king. I sweep mine twice a year, i burn allot.
-
Truck Pro
-
Burton Metal 614-252-9523
-
You should seal concrete to help prevent salt damage and staining caused from oil,dirt,etc. I recommend a penetrating sealer after 30 days
-
Ill put it to good use, thanks
-
its really easy to diy. Just use soap/water mix to check for leaks. Also don't forget to put in a dirt leg . Buy the stuff in the lengths you need pre threaded from home depot or lowes.
-
3/4" Dia x 12" Long 1/2" Shank Rebar Cutter RELTON CORP. Wholesale: $81.99 / each Sign in to view customer-specific pricing. Fastenal Part No. (SKU): 0282051 Manufacturer Part No.: RB-12 UNSPSC : 27111543 Manufacturer: RELTON CORP. Category: Tools & Equipment > Power Tool Accessories > Hole Making Accessories > Rebar Cutter Bits
-
The far right bit is for busting thou re-bar in concrete, a normal concrete bit wont cut steel
-
Where you located?
-
Thanks for the greats pics
-
Are you needing Precast concrete ones or just cast iron frames/lids? Sometimes its cheaper to do cast in place concrete with iron lids.
-
I have a 94 roller 302 truck block complete,"but" needs pistons and possibly machine work. was burning oil, ring issue.
-
Get a few empty 55 ga drums and go buy it from a local commercial supplier like M & D or Brewercoat.
-
I have done it several times, my township is a pain in the ass to work with.
-
Make sure the trailer has an adjustable coupler to compensate for the lift so you can keep the deck somewhat level.
-
Burton Metal does sand Blasting. Ask for nathan aka Homer FYI they can powder coat them too...
-
PM sent
-
You can do some amazing things with concrete. Its cheap if you DIY look up http://www.concretecountertopsolutions.com I use their PVC Z forms often and have great results.
-
CONCRETE
-
I do allot of it. Make sure you do a sample because sometimes acid wont react. I've had some jobs not take at all, even with surface prep. Acid staing is really nice but it can highlight any flaws ( stains, cracks, spalls, etc). If used with a gloss sealer you can get some really rich colors to appear!
-
Beat my Novas best pass at 11.93 at 111.8 1.6 Glad mother nature didn't ruin whole the day