Lauren

Hey guys I need to sell the 335xi I bought from smokinhawk here. I planned on keeping it but the wife and I decide to move to alabama in August so I have to liquidate to build some capital until business takes off there. Anyway this car has been taken care of the past three months by me. All major service and gaskets done. Oil pan and valve cover and new high pressure fuel pump and sensors. Vrsf relocation inlets Downpipes 7" intercooler Charge pipe and tial Bov MHD stage 2+ tune M3 front bumper and sides Msport rear bumper It has a newer clutch in it 18x9.5 square set up with 245/40/18 tires. 15mm rear spacer Monaco blue over black leather Sport , premium, comfort, navigation and blue tooth All windows work. I went through the car and fixed everything except the rear driver door ha dle. It needs a new actuator. And it was rubbed and needs the rear quarter panel fixed. Also front turbo has waste gate rattle like all n54 cars $6500 firm. That's what I need to get out of it. Sent from my VS988 using Tapatalk

I bought a Audi TT 225 quattro 6 speed manual about a month ago. It made a really High pitch squeal whirling sound when I went to see it. Motor sounded healthy but something sounded off. I didn't run it long and towed it home. After I got it home it never did start again. I could turn the crank but the flywheel didnt spin, and I could spin the flywheel but the crank never turned. I knew I was in for a treat I jisted didn't expect this. Finally found time to tear into it. Here's what I found. So should I extract the broken bolts and slap a new flywheel and ARP hardware and call it a day or should I get a new bottom end? Think this crank is OK? Sent from my VS988 using Tapatalk

Is there a budget ? E93 vert 328 or 335 manual. B6 a/s4 and swap to a manual. Either one should fit the bill nicely.

So I was in savannah Georgia the past four days. Last night during work dinner we are in the conference room at the Hyatt that is on river st and overlooks the river. As we are eating we spot something floating and as it drifted closer to shore it was a body. Looked like a younger girl. She was face down. I sat and watched for two hours as they removed her from the water and covered her up then examined her and took pictures. I was in slight shocked as what I was watching. I have a video but its pretty disturbing not gonna lie. It was to graphic for the local news station when I sent it to them. They couldn't use it on air. Sent from my VS988 using Tapatalk

I did this heavily back in 2008-10. My business partner and I specialized in miatas and rx7's. We had a three bat shop and warehouse of storage. We also built customer cars What type of building do you have now? We started with a flex space warehouse in an industrial part of town before getting our own building and having a showroom.

Thought you are keeping it?

Its an lg g6. It shouldn't be that bad. Maybe pm time I got the pixel 2

And the m sport rear finally went on Sent from my VS988 using Tapatalk

The relocated inlet are dyno proven 40-60rwhp gains over stock location inlets. They are much more free flowing and do not taper down at all. So now its not sucking anymore hot air and losing horsepower versus OEM location. Plus they look cooler haha

I tried to polish them lol. Ordered LcI headlights.

Got side skirts and front on today. Hopefully rear bumper on tomorrow. Looks killer I think Sent from my VS988 using Tapatalk

Suppose I should update this. Car runs fantastic. All engine mods are done. I just picked this stuff up from the paint shop this morning. Going yo get it all mounted in the morning then she will be finished Not pictured is the m sport rear bumper as well. Sent from my VS988 using Tapatalk

Boxster is a hell of a car

I had no idea that gen XK was that cheap now. I'll have to get one

Windshield place on corner of Morse rd and Westerville road. Half the price of safe lite. They do good work

We need to ban guns and military style weapons. Amidoinitright geeto?

Well the rover didn't last long. I put a feeler out to sell. Had a guy show up paid me $5000 for the gold one this morning. The grey one is in Cleveland and I backed out of the deal for it. So I turned my $750 to $5000 and did zero work to it. Not a Bad day

Thanks for the heads up. Was headed to buy two gallons for the 335 today.

It needs exhaust manifold gaskets for sure and a full exhaust. But I can get into it for $1400. Extended cab with minimal rust.

Thinking about a 08 f350 super duty with the 5.4. I need a hauler and tow truck. Perhaps I'll pass

Speak to me about the 5.4 in a 2008 truck. What should I look for? How common are they to swap new ones in?

What's the cheapest LS engine to buy. I fully plan on lsx swap in my range rover. Already sourced the adapter plate and mounts.

It is. My gold rover came with one as well

They are hands down one of the worst installs but they flow the best. Relocating the coolant tank also sucks.

Well this car is done now with the exception of paint and body panels. All engine stuff is done and its a blast to drive. It won't see the road though until its all put together. I'm in no rush. Here's how the engine bay turned out with the inlets moved to the passenger side. It sounds incredible. Coolant resivoir moved to the driver side Sent from my VS988 using Tapatalk