coltboostin
-
Posts
4,721 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Store
Events
Posts posted by coltboostin
-
-
They tried this up north.
It Failed.
I think this only works if its part of/next to/in conjunction with a actual racing facility. Sure, everyone would love a man cave with a GT3 and a Z06, and your side piece waiting in the wings. But as this ends up being, its just a pipe dream.
Hope it works out down south!
-
Well, good things are happening.
933AWHP and out of fuel. Boost is still mild at 43psi. This is a stingy dyno too- Last year 801whp on this Dyno was good fro 880whp on Carlyles AWD Dynojet, and 160mph trap speed.
Current plan is to add an AEM 380 to the mix and see if we can sneak a little more out of her. Still have quite a but of stuff to address but we should be ready for the first local event Sunday!
Everything in this build is used, Ebay, or zip tied besides the off the Shelf Weiscos. I didn't even take the oil pump off the block LOL. And yes, Im still rocking the fence post Drive shaft. The craziest part is, I am 200% sure it will make quite a bit more power if I can get more fuel. Crazy times we are in!
-
ON3 for a few reasons.
1) Price
2) Support the locals!
3) MO POWA at the twist of a knob
-
Of course it's a CRV.
Of course it was a woman. :lolguy:
-
For $50 for 4 studs, I'll continue to use anything I find in my parts bin.
-
Only thing I have done to the BMW is 3 years is win races and add gas. Turbos on Kill the whole time #gladIdidntbuytheaudi #sorry #toosoon?
-
Finally carved out some time to build a bath in the basement
-
The lady down the street tried that. They told her to kick rocks. I feel I did the right thing.
I'll bet you $100 her house is sold in the next 12 months.
-
Brad-
Jesus
-
it's even possible that is a stock factory wheel for the c8 corvette! :eek:
The Wheels are fuckign Hideous.
But, with a set of wheels that fucker may be a 10 out of 10.
Can't wait to gap one in my NA C6.
-
Fuck no. They NEED the Land. You have the advantage here, not them! If anything call Brad (above) to be your rep-let him get paid!
-
Just wondering what Ohio events you'll be bringing this thing to? Coming down for Spring IFO? Street Car Takeover again?
Always love following you and your mad scientist ways!
Ha! Thanks.
Spring IFO no- SCT hopefully yes. INFO D42 Yes. Shootout HELL YES!
I'd love to get to a 1/2 mile event but scheduling may be tuff will my new position.
-
If it's in specs, send it.
You would have to remove and disassemble the oil pump and hit it with a feeler gauge to check that spec.
My spec is to grab the gear and give er' a feel. Feels good, I'll run it all day. (My wrist is calibrated)
Everything int he motor torqued in a similar fashion. Options are snug, tight, and real tight.
-
help me on that lower scoop- is that a fake stock on Z06 rep scoop?
-
I can guarantee it's out of my price range for beater. There were 3 awd dsm's that ran that were less than 2k that sold here in columbus. They may have been ugly as sin, but work had been done to them.
One of the fastest local true DD's street DSMs up here is the most clapped out POS I tuned last year. Legit 3 different color body panels on the car. Kid is a good wrench but missed on a lot of the little tricks- First time he brought it to me, it barely ran and I gave him a laundry list of things to change or fix. He ended up dumping the car for $1500. I have the new owner the same fix it list and he brought it back for calibration. I stopped at 620whp to keep the stock block alive. :lolguy:
He actually brought it over last night. Rippin' on it EVERY DAY. He hung out int he garage for a few and then took it to a tity club a hour away after!
Still feels like a 140 MPH car. Smells like an armpit.
-
Keep rockin' it, Tercelbro.
Till i DIE
And just so you guys don't lose faith in my sloppiness- I am reusing the oil pump that was on the motor. Feels good-ship it. Its a little dirty tho... :lolguy:
-
You're like the Burt Munro of the DSM world, JP. <3
I dig it! Still yet to see the movie tho
The Matt Happel of the DSM worldHe's legit not ready for me.
If I showed up to one of his dyno days and lay'd down the DICK 15% of the internet that knows what "LS swap" means may implode.
Whats the meaning of the 1,0,0,0 on the rods?Because 999HP just aint enough.
-
Oh yes. What I have assembled is a 2.o Long Rod now. Its a good mod!
-
Im kicking myself passing on two dsms last year.
DONT lol! Its all smoke in mirrors! The Rods are "used"- bolted into a motor to realize he got the wrong ones LOL. 156mm Long- I am using "LR" pistons and a standard 2.0L crank- all stuff I had laying around.
can i sign up for your fan club?All are welcome.
-
Sounds like you need to buy an Sn95?
-
God a killer deal on a set of Aluminum Rods so it looks like we are going to turn up until we run out of fuel for 2019.
Goals this year are 165+ and if I can actually get a to a 1/2 mile event, the elusive 200mph.
-
There are good and bad things about every president and presidency, including this one. I like his tax proposals to help small to medium businesses. I like his pro'merica' outlook on trade and tariffs. I really wish her would stop tweeting.
What to super-pro trumpers say about the ballooning deficit? Solution? Is it the dem's fault?
-
The_buster is so accurate! Most every post all I can think is "THEBUSTER"
Fix it. Unless its MINT your cant get 1100 for it. And, it doesn't sound mint.
-
Good pic.
The Colt- V.3 "el Chapo"
in Pics and Vids
Posted
*ecmlink aka DSMlink.
Yup. Same one from the car I crashed in 06 too. :lolguy:
So far so good. We re-syncro'd the $50 holler from the shootout and- so far so good!
I hope to be on track Sunday for the SlowMoEvent/rental- but I have to get more fuel in the car before I run it safely anywhere near this power level