shep Posted June 10, 2014 Report Share Posted June 10, 2014 Has anyone on here ever built their own AR this way before where they send you a 80% completed lower, you finish the milling and what not, basically your own build without any manufacturers names or markings on the rifle? Sounds pretty fun Quote Link to comment Share on other sites More sharing options...
MidgetTodd Posted June 10, 2014 Report Share Posted June 10, 2014 Also the perfect way to blow your hand or face off if you are not skilled at milling. Quote Link to comment Share on other sites More sharing options...
TSB67 Posted June 10, 2014 Report Share Posted June 10, 2014 Also the perfect way to blow your hand or face off if you are not skilled at milling.Really? Please tell me more about this failure mode. Quote Link to comment Share on other sites More sharing options...
banditj13 Posted June 10, 2014 Report Share Posted June 10, 2014 How would a failed lower result in an explosion? All the major pressure bearing parts are contained within the upper, aren't they? Maybe a ftf due to poor trigger group installation or something...but explosion? If my ar were to explode... I think I would be looking at what round I was shooting, and the breach/chamber before I looked at the lower... Quote Link to comment Share on other sites More sharing options...
SecondLiar Posted June 11, 2014 Report Share Posted June 11, 2014 Also the perfect way to blow your hand or face off if you are not skilled at milling. ...not to mention shooting your eye out... If you have a milling machine and a jig it's pretty simple. Go slow, take light cuts, and measure often. I like theTactical Machining stuff. Quote Link to comment Share on other sites More sharing options...
Unk Greg Posted June 14, 2014 Report Share Posted June 14, 2014 Oft talked about with us folks in the hills....cost savings is in question. Get the kit and 80% lower and a few trappings, you soon have the cost of simply buying one new gun and filing the required paperwork. In the interest of not having to file paperwork....uhmmm, Ares ( http://aresarmor.com/store/News) and another (I can't remember the name) (http://www.conservativefiringline.com/cal-gun-shop-center-battle-batf-client-files/ & https://www.facebook.com/tacticalmachining) are under Feds scrutiny and the Feds want their customer list of who bought the 80% lowers. Ares purportedly had dimples in the blank, yet to be finished lower....and that so the story went, made them BAD boys, and big brother wants names.Better would be to buy a lil' mill and drill press combo and just carve out everything yerself and avoid any customer purchase trail. Like a Little Machine Shop Nano Mill and conversion kit, Lathe to Mill and Drill....and then the tools to machine metal.....the cost factor enters in....Brownells has a DPMS "sport rifle kit" minus the lower and sights for $499. An 80% can run from 80 bucks to $129. Then ya gotta drill and hog out metal. So unless ya like building things, maybe just buy complete rifle and yer out plinking at groundhogs.http://tacticalmachining.us3.list-manage.com/track/click?u=9894e42097af8507fa3a7f40d&id=d505f5652e&e=e8b021e497http://aresarmor.com/store/Item/TACMHDM8http://www.klstottlemyer.com/klstottlemyer.com/Prints_drawing_etc_files/AR15_blueprint-Model.pdfhttp://www.weaponsworld.com/dpms-oracle-5-56mm-223-rem-complete-ar15-rifle-kit-less-lower-receiver-16-barrel.html.......just say in' ya know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.