zeitgeist57 Posted July 21, 2003 Report Share Posted July 21, 2003 Thanks to Berto for helping me with my new brake lines today. Unfortunately, now I have new brake lines, fresh fluid, and have bled the front disc brakes on my C10 but the REAR DRUMS WON'T BLEED! I've totally taken out the bleeder valves and pumped like a mofo, but no fluid or air is spitting out. Am I missing something here? Quote Link to comment Share on other sites More sharing options...
Berto Posted July 21, 2003 Report Share Posted July 21, 2003 did u get more fluid? remember have someone pump several times(valve close) then ask them to hold the pedal, open and close valve. repeat. Quote Link to comment Share on other sites More sharing options...
Akula Posted July 21, 2003 Report Share Posted July 21, 2003 You have to run a line from the bleeder into a small fluid bottle, make sure the line is submerged in fluid. Then open the valve and have someone push the pedal to the floor slowly, then close the valve and release, repeat until all air is gone. Quote Link to comment Share on other sites More sharing options...
Akula Posted July 21, 2003 Report Share Posted July 21, 2003 Forgot to say that you have to keep filling the system too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.