Red92Notch Posted June 9, 2006 Report Share Posted June 9, 2006 I'm Russell and I'm noob. I live in Delaware, Ohio (20 miles north of Columbus) and I have an '86 turbocoupe that needs to go. It was a donor car for my turbo notch project, I allready took the gauge cluster, pedal assembly, taillights, grill, nylon fuel lines, engine, tranny, driveshaft, 8.8, ECU, and the related wiring connectors to swap it into my '91 stang. The blue cloth intior is in pretty good shape, the car only has 116k on the clock, all the power accessories, doodads, and gagets seem to work verry well. There is a tear on the driver's seat left bolstering (of course), but other than that I was suprised how nice it is! I only had the car for a few weeks before I started to strip it down and a faulty fuel pump kept me from driving it daily. The 7.5" out of the stang is under it now with the bolts thrown in, I was going to swap out the front spindles and I stripped them down before I realized the brakes were the same as the 'stang, so i just threw the rotors on. It is on all fours on "14 stang wheels, it rolls and steers, but I never hooked up the rear brakes and the front calipers are gone, so no brakes. You could probably lift the front wheels and dolly it, but if you were going to flat tow it you will need to replace the front wheel bearings. The body probably won't be of any use to anyone there is rust on every panel, but the glass and interior is all good, The local scrap places will come get it and give me a few bucks, but I would mutch rather have someone get some use out of it. If you can come get it, or make arrangements with me in the next week I would love to see it roll out of here for parts than it get turned into fencing I would like $100 for it to put into my project, I'm on a verry tight budjet, But I also would be willing to trade for parts as well. I know I need an E6 exhaust manifold, and an LA3 ECU, but I wouldn't mind having a new set of wheels, spare motor, head ect. If you are interested, know someone who is, or have any questions please E-mail me at RShelby67@yahoo.com Thanks, Russell Link to comment Share on other sites More sharing options...
Comebackkid Posted June 9, 2006 Report Share Posted June 9, 2006 ill give you 75. Link to comment Share on other sites More sharing options...
TurboRust Posted June 9, 2006 Report Share Posted June 9, 2006 scraping a turbocoupe to make a mustang.... you bastards... wanna race in a month or so :D:D Link to comment Share on other sites More sharing options...
Recommended Posts