Guest Ponyfreak Posted January 5, 2007 Report Share Posted January 5, 2007 I came across a ton of bends for sale, and have a lot left over from a couple of cars. I have everything from 1.5" up to 5 or 6" in aluminum and stainless. Only have 90's and 45's, no 180's. Most bends are 16ga, but the larger bends are 14ga I think. Email me if you are looking for something in particular and I probably have it. 5-6" aluminum bends will sell for around 35$ or so, smaller bends are cheaper Link to comment Share on other sites More sharing options...
BIGGU Posted January 5, 2007 Report Share Posted January 5, 2007 do you have 4 90' in 2.5'' and do you have 2 45' in 2.5''? Link to comment Share on other sites More sharing options...
Guest Ponyfreak Posted January 5, 2007 Report Share Posted January 5, 2007 What kind of metal? 304 or aluminum? Link to comment Share on other sites More sharing options...
BIGGU Posted January 5, 2007 Report Share Posted January 5, 2007 aluminum Link to comment Share on other sites More sharing options...
Guest Ponyfreak Posted January 6, 2007 Report Share Posted January 6, 2007 yes I have them in 16ga with 5" legs on each end. $22 for the 90's and $20 for the 45's. Burns SS wants $52 a piece for them. I take paypal and can ship next week. Link to comment Share on other sites More sharing options...
Mattsv8 Posted January 6, 2007 Report Share Posted January 6, 2007 hey do you have any 5" 45s and 90s in stainless. i could use 2- 90s and 3 45s. i need to use them for my downpipe. also do you have any cheap 3" stainless 90s i would need 4 of them. shoot me a price for all. thanks. Link to comment Share on other sites More sharing options...
Guest Ponyfreak Posted January 6, 2007 Report Share Posted January 6, 2007 I will check and get back with you. I am sure I have the 5"as that is what I used on my DP. If I do I will sell them a lot cheaper than you can find anywhere else. I think I bought mine from Woofe aircraft for 90 a piece. ( Link to comment Share on other sites More sharing options...
Guest Ponyfreak Posted January 8, 2007 Report Share Posted January 8, 2007 I do not have any 5" SS pieces left over. I can get a 5" 90 for $75 if you want one though. I have the following: Aluminum 2.5" 90 6" CLR 13$ 3.5" CLR 20$ 3" 90 6" CLR $16 4.5 CLR 20$ 4" 90 27$ 5" 90 35$ 6" 90 65$ I decided not to sell any of my stainless steel. Link to comment Share on other sites More sharing options...
Mattsv8 Posted January 9, 2007 Report Share Posted January 9, 2007 i was going to say anyting ss is a lot of money. i got some good price from a company in fl, race part solutions i beleve. was arround 80 or 90 for a90deg 5" ss bend and like 110 for a 45. im doing my dp in five inch as well. did you just dump your exh in the engine bay or did you run it under your car? im still trying to decide if in need a 5ft straight section or not. if you did dump in engine bay or out front fender is it way too loud to street drive or is it livable. Link to comment Share on other sites More sharing options...
smokinHawk1647545499 Posted January 9, 2007 Report Share Posted January 9, 2007 lol my 4" dumped with only a 347 cubes is loud, i bet 8 liters is louder. and ill take 2 of those 4" alumin like my pm said Link to comment Share on other sites More sharing options...
Recommended Posts